fleg
/
OpenRTX
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update build instructions and .gitignore

This commit is contained in:
Niccolò Izzo 2020-10-14 14:12:50 +02:00
parent e9696920a6
commit fabc874d63
2 changed files with 25 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
.gitignore vendored
View File

@ -1,5 +1,6 @@
# Meson build dir
builddir
# Meson build dirs
build_linux
build_md380
# Prerequisites
*.d

26
README.md
View File

@ -23,16 +23,25 @@ The following steps depend on the selected platform:
The OpenRTX linux build depends on libSDL, on Ubuntu you can install it with:
```
sudo apt install libsdl2-dev
sudo apt install gcc pkg-config libsdl2-dev
```
The firmware can be compiled with:
```
meson builddir
meson compile -C builddir openrtx-linux
meson setup build_linux
meson compile -C build_linux openrtx-linux
```
If you are using a version of Meson older than v0.55.0, the above command will fail, compile with:
```
meson setup build_linux
ninja -C build_linux openrtx-linux -jN
```
Where N is the number of cores that you want to allocate to the build process.
### TYT MD-380 / TYT MD-UV380
To build the firmware you need to have a toolchain for the ARM ISA installed
@ -46,10 +55,19 @@ sudo apt install gcc-arm-none-eabi
You can then proceed in building the firmware:
```
meson builddir --cross-file cross_arm.txt
meson setup --cross-file cross_arm.txt build_md380
meson compile -C builddir openrtx-md380
```
If you are using a version of Meson older than v0.55.0, the above command will fail, compile with:
```
meson setup --cross-file cross_arm.txt build_md380
ninja -C build_md380 openrtx-md380 -jN
```
Where N is the number of cores that you want to allocate to the build process.
If everything compiled without errors you can connect your radio via USB,
put it in recovery mode (by powering it on with the PTT and the button
above it pressed), and flash the firmware: