e469c856cc
Initial BSP for Baofeng DM-1701
2025-04-02 19:28:22 +02:00
fb9dd20147
CS7000P: added radio driver
2025-03-26 19:58:14 +01:00
8625184030
CS7000P: enabled audio management system
2025-03-26 19:58:14 +01:00
891f18cac7
CS7000P: enabled NVM storage
2025-03-26 19:58:14 +01:00
894d7b8b57
Initial BSP for Connect Systems CS7000-PLUS
2025-03-26 19:58:14 +01:00
f5012e0f63
Drivers: ADC: added driver for STM32H7 devices
2025-03-20 20:35:23 +01:00
6ff868c7a4
Moved STM32F4xx ADC driver under platform/drivers/ADC
2025-03-16 17:44:26 +01:00
8f844c9f99
CS7000: radio: added detection of CTCSS tones
2025-03-16 10:13:00 +01:00
4244d85405
CS7000: use hardware SPI for HR_C6000 control interface
2025-03-16 10:13:00 +01:00
6513d5593a
CS7000: driver for channel selector knob
2025-03-16 10:13:00 +01:00
cb338ceb3d
CS7000: added GPS support
2025-03-16 10:13:00 +01:00
ebff73a95f
CS7000: audio driver
2025-03-16 10:13:00 +01:00
68b001310e
CS7000: radio driver
2025-03-16 10:13:00 +01:00
1f8a2092b3
CS7000: nonvolatile memory driver
2025-03-16 10:13:00 +01:00
d85287e692
CS7000: platform: added Vbat, mic and volume level measurement
2025-03-16 10:13:00 +01:00
4a76d67184
Build target for Connect Systems CS7000
2025-03-16 10:13:00 +01:00
52d0c71323
MD9600: Enable Screen Backlight
2024-12-29 00:44:03 +01:00
e1572f8eb5
MD-9600: using STM32 ADC driver
2024-11-10 13:59:35 +01:00
10d7ded93f
MD-UV3x0: using STM32 ADC driver
2024-11-10 13:59:35 +01:00
81c55b5377
MD-3x0: using STM32 ADC driver
2024-11-10 12:04:10 +01:00
3ff2d31a70
UV3x0: renamed PA_EN_1 and PA_EN_2 gpios to, respectively, TX_PA_EN and RF_APC_SW
2024-11-09 13:09:56 +01:00
3469feb065
MD-UV3x0: using HR_C6000 DAC for "beep" tones
2024-11-09 12:02:46 +01:00
2d0bf51873
MDUV3x0: using HR_C6000 for MCU to speaker audio
2024-10-12 12:24:05 +02:00
98978b907f
GDx: updated radio driver
2024-10-09 22:02:51 +02:00
8f9502cade
MDUV3x0: updated radio driver
2024-10-09 22:00:10 +02:00
0c4a0435a8
MD3x0: update radio driver
2024-10-09 22:00:10 +02:00
5e94d2fef6
GDx: updated nvm driver
2024-10-09 21:24:33 +02:00
9dc449396a
MD9600: updated nvm driver
2024-10-09 21:24:33 +02:00
23e4ce0a8a
MDUV3x0: updated nvm driver
2024-10-08 19:20:59 +02:00
3b877d20df
MD3x0: updated nvm driver
2024-10-08 18:59:05 +02:00
9ff6375c18
GDx: merged the GD-77 and DM-1801 targets into a common "GDx" one
...
Radioditty GD-77 and Baofeng DM-1801 radios are 99.9% equal, the only
difference being the assigment of a few gpio pins.
2024-10-02 09:37:53 +02:00
fc1fc41f14
Module17: removed old DAC initialization code in platform_init()
2024-07-03 21:47:38 +02:00
cea48f8d57
Linux: added Module17 hardware info flags to allow compilation of UI emulator
2024-06-23 09:46:13 +02:00
220d4d2ef4
Module17: added VBat measurement to ADC1 driver
2024-06-21 19:27:28 +02:00
4f2c461bf0
Module17: added detection of baseband soft potentiometers
...
Detects the presence of the soft potentiometers. Display the detected potentiometers in the info menu.
2024-06-21 19:26:32 +02:00
b5e49a3b4d
Module17: reorganized display drivers, implemented dynamic selection of display driver
2024-06-21 19:26:32 +02:00
30e9311a20
Module17: added support for hardware revision 1.0
2024-06-21 19:26:31 +02:00
40780af16d
Module17: using standard ADC driver
2024-06-21 19:26:03 +02:00
7052dbcf8b
Module17: use hardware I2C for MCP4551
2024-06-21 18:09:53 +02:00
b98ea17aee
MK22: updated gpio driver
2024-06-21 18:00:33 +02:00
8842b98a52
STM32F4xx: updated gpio driver
2024-06-21 18:00:33 +02:00
8550e4f7a6
Module17: renamed calibration fields for TX/RX baseband inversion
2024-03-13 08:37:04 +01:00
ed92d81543
Module17: implemented configurable logic levels for PTT in/out
...
See #248
2024-03-13 08:37:04 +01:00
fdd08d4bcb
Module17: removed screen contrast setting, added screen brightness setting
...
Module17 uses an OLED display, which does not have contrast regulation. The
contrast control register, however, allows to change the brightness of the
display.
2024-02-06 21:11:41 +01:00
202a199442
Module17: added a 100ms sleep after power off to prevent the board from rebooting.
...
Fix #230 .
2024-02-06 21:08:17 +01:00
1791e70eef
Using newlib-specific sniprintf in place of snprintf
...
Using the newlib's printing functions without floating point support in order
to reduce the overall binary size. This allows to free up around 15kB of space
in the .text section.
2024-02-06 19:19:44 +01:00
dc930f4a4b
Added CONFIG_M17 macro to enable M17 support on each target
2024-02-01 11:07:20 +01:00
e54234f968
Renamed UI_NO_KEYBOARD macro to CONFIG_UI_NO_KEYBOARD
2024-02-01 11:07:20 +01:00
8bc867beae
Using Kconfig-style #defines for GPS, RTC and knob type description
2024-02-01 11:07:20 +01:00
cc27cc28a4
Using Kconfig-style #defines for battery type description.
2024-02-01 11:07:20 +01:00
fred
Silvano Seva
marco
Morgan Diepart