9038745b6f
extracted logic for testing if the function key is latched into its own function for readability.
2022-10-28 08:30:46 +02:00
bc7ce57f9b
Reworked function latch. Now, the latch is silently released on the next key press event which is outside the timeout.
2022-10-28 08:30:46 +02:00
da935ff710
Added function menu latch.
...
1. If the moni key is long pressed by itself (no digit), function key latches.
2. It remains latched for 3 seconds.
3. If a subsequent key is pressed during this time, the timer is restarted at 3 seconds again, allowing the user to say increase the ctcss code while keeping the function latched.
4. If no key is pressed, the timer is allowed to lapse and the function unlatched.
2022-10-28 08:30:46 +02:00
7cd3f1d49a
Added announceSettingsTimeDate and hooked up to f1 on that screen.
2022-10-28 08:30:46 +02:00
b1c07e3d3f
Added speech for About screen.
2022-10-28 08:30:46 +02:00
8527b8a6ef
Add GPS voiceprompts announcing
...
Removed flag parameters from summary and GPSInfo,
hooked up the GPS info so that if the GPS screen is active,
long hold f1 will read the GPS summary and f1 will repeat the last
voice prompt like on the VFO and channel screens.
2022-10-28 08:30:46 +02:00
74ab9cbbf6
Fixed voice menu, it will now display as: Voice off, Voice Beep, or Voice 1 through 3.
2022-10-28 08:30:46 +02:00
206e827aeb
Implement three levels of verbosity
...
Implemented the three levels of verbosity, besides none and beep:
1. Low: menus will speak but frequency and channel changes will just beep.
2. Medium: everything will speak but extra descriptions are eliminated except where ambiguity might occur.
3. High: Like medium except extra descriptions are spoken unles rapidly keying through menus in which case only the value will be spoken.
2022-10-28 08:30:46 +02:00
16abf941d4
Added Voice menu to settings.
...
The Voice menu has two options:
Level: off, beep, level 1, level 2, level 3,
Phonetic: off, on.
2022-10-28 08:30:46 +02:00
07d971ecfb
Hooked up repeat last voice prompt and summary to f1 if vpLevel is higher than beep.
2022-10-28 08:30:46 +02:00
537a20eef5
Add prompts for brightness and squelch
...
Added support for announcing macros for adjusting brightness and squelch.
Added voiceprompt for squelch.
2022-10-28 08:30:46 +02:00
e74eccfffd
Added support for macro 6 announcing the cycling of radio mode.
2022-10-28 08:30:46 +02:00
d19e0d57ec
Added bandwidth and power announcements
...
Added bandwidth and power announcement for both macro and summary.
Added new voice prompts for bandwidth and power.
2022-10-28 08:30:46 +02:00
68926a72c4
Began work on the macros screen.
...
Toggling tone or enabling/disabling (macros 1 and 2) now supported.
Added new voice prompt for tone.
2022-10-28 08:30:46 +02:00
0a410fe336
Speak only when values change
...
Changed the function which determines if we should speak the new menu
item to make it also check if a menu item's value changes.
2022-10-28 08:30:46 +02:00
e691f37f88
Extracted and added a few more strings to the string table and created voice prompts for those strings.
2022-10-28 08:30:46 +02:00
46fab4642b
Make VFO accessible through voice prompts
...
Added calls to various voice prompt functions in the UI so that VFO is basically accessible.
1. When entering digits in VFO mode.
2. When digits exceed 3, point will be announced.
3. When user enters sufficient digits to move from RX field to TX field, or if user presses Enter to move to TX field.
4. When both rx and tx frequencies have been completed.
2022-10-28 08:30:46 +02:00
d68f01ffbc
Insert voice prompt utility function in UI code
...
Began calling voice prompt utility functions from places such as:
1. arrowing up and down in VFO mode (read new frequencies)
2. up and down in memory mode: read new channel name.
3. up and down in VFO input mode: announce receive or transmit,
4. when starting to enter a frequency: announce receive and the first digit.
2022-10-28 08:30:46 +02:00
b3a861a47c
Usability improvements
...
Remove DMR from macro menu until we actually support it.
Remove print of M17 source callsign
Bank and channel visualization is more compact to make room for
additional data on a single screen.
Refactor mode screen to fit all data into a single screen.
2022-10-28 08:30:46 +02:00
37c9e0dbc3
macro menu mode change: catch invalid states
2022-10-18 14:07:48 +02:00
25d6c20ef0
Reorder macro menu functions
...
Swapped brightness and tone increase and decrease to be more intuitive.
2022-09-27 22:35:50 +02:00
5ff74aaaa7
Add FM tone decrease Macro
...
Reorganize macro menu buttons to enable tone decrease and eliminate
channel save as it was not yet implemented.
2022-09-27 22:35:50 +02:00
6a9ce50f6b
Usability improvements
...
Remove DMR from macro menu until we actually support it.
Remove print of M17 source callsign
Bank and channel visualization is more compact to make room for
additional data on a single screen.
Refactor mode screen to fit all data into a single screen.
2022-09-27 22:35:50 +02:00
94baec6981
Changed the granularity of VFO frequency input mode from tens to hundreds: this reduces the number of digits to be inserted to seven and avoids the line to overflow towards the bottom
2022-09-02 07:54:32 +02:00
48cd81ee7c
Changed to 'static' some variables inside UI module
2022-08-28 11:49:10 +02:00
b26d783429
Small optimisation of UI management: perform an update and render of the graphics only when necessary
2022-08-28 11:49:03 +02:00
84d66ca1b3
Changed parameters of ui_pushEvent(): now it accepts event type and payload instead of a single element, this cleans the code up a little bit
2022-08-10 18:05:02 +02:00
f1dbfbfe1f
Fixed compilation warnings
2022-08-04 22:22:56 +02:00
5f40ceceb3
Added field to state data structure containing the current operating state of the device. Implemented clean shutdown of all the threads.
2022-07-02 10:47:19 +02:00
4528e102a2
Moved the UI event queue inside the UI engine itself, UI FSM update now becomes a periodic task
2022-07-02 10:28:28 +02:00
40337e7c97
Removed radio model name from UI info page
2022-07-02 10:28:28 +02:00
2fc89bf583
Renamed 'HAS_GPS' and 'HAS_RTC' to, respectively, 'GPS_PRESENT' and 'RTC_PRESENT'
2022-07-02 10:28:28 +02:00
6d10f52b5b
Clean termination of all the threads on device shutdown
2022-07-02 10:28:28 +02:00
bc0c80edf6
Displaying of current heap usage in info page
2022-07-02 10:28:28 +02:00
52ead401bd
Reorganised GPS task to make it a non-blocking task to be called periodically
2022-07-02 10:28:28 +02:00
d16eb04696
Reorganised data structures and functions to manage date and time
2022-07-02 10:28:28 +02:00
3cc5852ef3
Refactored keyboard thread by moving the keypad scan logic to a dedicated function inside input.h
2022-07-02 10:28:28 +02:00
1f56018e52
Added space character to UI text input mode.
2022-06-17 12:15:00 +02:00
521865f489
Fix bug in new cps code
...
Fixed some bugs in the write and insert functions of the new cps format
functions, currently available only on libc implementations.
Add unit test to ensure that no regressions happen.
TG-428
2022-06-01 16:05:36 +02:00
ae12a2126a
Implement codeplug read and write functions
...
Implemented remaining codeplug functions to read, write and insert
codeplug entries. Fix bugs in ui code. Add unit tests.
TG-428
2022-06-01 16:05:35 +02:00
dc250a25d6
Implement new codeplug interface
...
The new codeplug interface was implemented for linux and retrofitted to
all the existing OpenRTX platforms. Limited unit testing was also
implemented.
TG-428
2022-06-01 15:59:27 +02:00
cbd3922325
Cleanup and reorganisation of state header file, new OpenRTX CPS data structure
2022-06-01 15:04:17 +02:00
da22d6ff64
Separated interface for CPS loading from the non volatile memory one
2022-06-01 14:56:33 +02:00
c3cfaba4b2
Renamed zones into banks to align to M17 codeplug naming convention.
2022-06-01 14:56:22 +02:00
6588a6718e
Add M17 namespace in M17 related source files
...
Now M17 source files reside in the M17 namespace, the OPMODE_ prefix
was added to all opmode enums to avoid a name clash.
2022-05-27 21:48:46 +02:00
48824accb9
Add flash backup and restore menu
...
Add flash backup and flash restore entries to menu system, to access
these functionalities from the radio itself.
TG-428
2022-03-13 00:21:52 +01:00
a5209d6f52
Modified range for display backlight level from 0 - 255 to 0 - 100, set minimum allowed level to 5.
2022-02-26 15:45:41 +01:00
9297c08b05
Add a menu for clearing settings and vfo to sane defaults ( #67 )
2022-02-26 12:42:28 +01:00
d04180c0df
Rename brightness_timer into display_timenr
2022-01-03 14:51:22 +01:00
d742d027b7
Display timer UI
2022-01-03 14:51:22 +01:00
269420c2be
Load standby timer from settings
2022-01-03 14:51:22 +01:00
fefe2f6de0
Exit standby when the squelch is open
2022-01-03 14:51:22 +01:00
ade9c47f71
Implement platform_setBacklightLevel for linux
2022-01-03 14:51:22 +01:00
6e3fda2a70
PTT terminates standby
...
Also the keypress getting out of standby is ignored unless is the MONI
key to activate the MACRO menu
2022-01-03 14:51:22 +01:00
f9751c9867
Send the screen in standby after 30s idle
2022-01-03 14:51:22 +01:00
91486291b6
MD380: adjust squelch with left and right keys
2021-12-23 14:52:25 +01:00
756812ca31
Created function for writing settings and VFO status to NVM, starting of temporary implementation writing data to the MCU's internal flash
2021-11-08 22:22:26 +01:00
c91e306026
Reorganised settings data structure
2021-11-08 21:44:33 +01:00
1e19574fd6
Add destination callsign input for M17, Add -/ to keypad input
2021-10-09 18:53:28 +02:00
65a632054a
Disable CTCSS tones in M17 mode
...
Removed CTCSS modulation for M17 mode, removed FM analog specific
settings in macro menu such as tone selection, tone enable and tx
bandwidth.
2021-10-08 16:02:03 +02:00
120fd92d73
Fix M17 callsign management
...
Now a default callsign "OPNRTX" is used in M17 mode, and when the user
sets its own callsign in the settings menu, that one is correctly used
instead. Add initialization to RTX data structure.
2021-09-06 22:55:46 +02:00
c04ceb9a8d
Add M17 radio mode to UI
2021-09-03 16:44:57 +02:00
f43f54117c
Fix M17 callsign setting
...
Fix M17 callsign disappearing in M17 settings.
The generic callsign (currently not used) was being shown instead of M17 callsign.
2021-09-03 16:44:57 +02:00
dc28f90a1d
Fix keypad text input, add caps-only input, add terminator to callsign
2021-09-03 16:44:57 +02:00
f104955686
Text Input: Delete character by using any arrow button
2021-09-03 16:44:57 +02:00
229a81b2ad
Add text input draft
...
Fix text input position not being reset when entering edit mode
2021-09-03 16:44:57 +02:00
87703a76e6
Add M17 Settings
2021-09-03 16:44:57 +02:00
882a657359
* Combine S-meter and Level meter
...
* Make squelch bar always yellow
* Include font height in s-meter total height
Correct bottom bar printing position
Increase bottom bar size on GD-77
2021-09-03 16:44:57 +02:00
118c514081
UI: Add digital mode screen
...
Use main screen bottom bar in mode screen
mode screen: Move frequency and channel name to center
Show S-meter without squelch bar for digital modes
Change S-meter for digital modes, add audio level meter
Print FM information in mode screen
Add mode screen fonts
2021-09-03 16:44:57 +02:00
4d3eacc144
Switched 'v_bat' and 'charge' fields of state struct from float to, respectively, uint16_t and uint8_t and updated UI functions accordingly. Rationale for this change is providing better support for future platforms without hardware floating point unit.
2021-08-14 12:56:45 +02:00
3bdaae0805
Fix squelch control on md3x0
...
Knob now generates dedicated KNOB_LEFT and KNOB_RIGHT messages,
fixed ui to consider those for enabling the squelch change.
2021-07-10 06:57:09 +02:00
57b66652b7
Use channel knob to change frequency and navigate menus (TG-238)
2021-06-05 18:11:30 +02:00
f5c9d97e49
Check frequency limits against hwInfo_t, not hardcoded defines
2021-06-05 10:47:52 +02:00
5b3f2b7e23
Simplify frequency limits check for VFO input
2021-06-05 10:08:15 +02:00
49cb28c5b8
Fix RTX not updated when switching from MEM to VFO (#30,TG-240,TG-241)
2021-06-05 09:36:00 +02:00
4b30a66735
Added 'platform_pwrButtonStatus' API function, which returns the current status of the power button/knob. Implemented power on/off mechanism on MD-9600
2021-04-11 12:38:20 +02:00
a42354a204
Remove Messages menu as it's not implemented yet
2021-04-11 10:06:12 +02:00
58f4f5dcaf
Print git commit or tag inside Info menu
2021-04-11 09:56:46 +02:00
341c46a263
Now state.time is UTC, add functions to convert from UTC to local and reverse
2021-04-10 15:39:59 +02:00
2d3d932111
Print battery voltage instead of battery icon for platform without battery
2021-04-10 12:16:21 +02:00
341ab84ce9
Converted `gfx_print()` from char * pointer to format string
2021-04-10 11:10:52 +02:00
9fb7ace303
Fix swapped UP/DOWN keys in Display Settings
2021-04-04 20:36:23 +02:00
42153be082
Macro Menu: Change squelch also with UP and DOWN
2021-03-21 09:14:44 +01:00
3da311ee38
UI: Change contrast steps to 4 to match GD-77 HW contrast range (0-63)
2021-03-14 11:21:39 +01:00
056c53b35d
Made UI fsm skip low battery check when TX is enabled to avoid spurious triggers of low battery alert caused by the high current absorption from RF PA
2021-02-24 21:00:30 +01:00
35bde9bccb
Add state_terminate() that saves settings to flash
2021-02-21 16:44:31 +01:00
820ac73d08
UI: Add menu_h and menu_font layout parameters
2021-02-20 16:03:37 +01:00
711d8426c9
Add 10pt font. Reduce frequency line on GD-77 to avoid overlap
2021-02-20 15:14:35 +01:00
cbe657cd77
UI: Fixed GPS OFF bug caused by ambiguous enable/disable code
2021-02-16 22:22:20 +01:00
9de0857ff4
UI: Add switch cases default options
2021-02-16 22:09:28 +01:00
75c1f13882
UI: Replaced strcmp with switch case to fix GPS/menu bug
2021-02-15 22:02:09 +01:00
9255dfb969
Disable GPS functions for radios that don't support a GPS chip
2021-02-14 17:49:23 +01:00
663673b697
UI: Fix compilation warnings
2021-02-14 14:04:01 +01:00
619cda7aeb
Turn off GPS when it's turned off in settings
2021-02-14 13:55:33 +01:00
31552ff2b2
Consider RTC time UTC instead of local time, applying timezone
2021-02-13 22:11:25 +01:00
ebe87b22e2
UI: Add menu edit mode. Small refactoring
2021-02-13 21:29:25 +01:00
66af402e83
Move settings from UI to State
2021-02-13 20:32:53 +01:00
d66b59694a
UI: Add GPS settings menu
2021-02-13 17:23:16 +01:00
a803958c61
UI: Menu scrolling logic refactoring, add GPS Settings entry
2021-02-13 16:35:03 +01:00
0a04650d58
UI: Use more compact representation for menu entries
2021-02-13 16:14:44 +01:00
vk7js
Niccolò Izzo
tarxvf
Silvano Seva
Jeff Gustafson
Alessio Caiazza
Federico Amedeo Izzo
Federico Amedeo Izzo