8527b8a6ef
Add GPS voiceprompts announcing
...
Removed flag parameters from summary and GPSInfo,
hooked up the GPS info so that if the GPS screen is active,
long hold f1 will read the GPS summary and f1 will repeat the last
voice prompt like on the VFO and channel screens.
2022-10-28 08:30:46 +02:00
c0371dad2a
Added pauses between lots of info in summary for comprehensibility.
2022-10-28 08:30:46 +02:00
46e3900462
corrected gps summary to use a stingized float for the compass bearing.
...
Also fixed another warning.
2022-10-28 08:30:46 +02:00
c24af62000
added more to GPS summary and fixed a couple of warnings.
2022-10-28 08:30:46 +02:00
4b604e255f
Added a few more voice prompts for the GPS screen: latitude, longitude, north, south, east,west, speed, altitude.
2022-10-28 08:30:46 +02:00
0a4ed4009c
Added announceGPSInfo so we can read something meaningful for the GPS screen (not yet hooked up).
2022-10-28 08:30:46 +02:00
c3667313ba
Extracted announceM17Info logic to its own function.
2022-10-28 08:30:46 +02:00
339131a5b7
Added M17 dst_addr to channel summary.
...
Added zone name to channel summary if called from memmory mode.
2022-10-28 08:30:46 +02:00
206e827aeb
Implement three levels of verbosity
...
Implemented the three levels of verbosity, besides none and beep:
1. Low: menus will speak but frequency and channel changes will just beep.
2. Medium: everything will speak but extra descriptions are eliminated except where ambiguity might occur.
3. High: Like medium except extra descriptions are spoken unles rapidly keying through menus in which case only the value will be spoken.
2022-10-28 08:30:46 +02:00
2102c15602
Hook up voice prompts in main startup routine
...
1. Call vpCacheInit() from the main startup routine.
2. If voice prompts are successfully loaded, and the hash key is held down, and the vp level is less than low, vp level is set to high.
3. If voice prompts are not loaded, and the level was set to something higher than beep, it is set to beep so that at a minimum, the user gets some beep feedback. If it was already set to off, nothing is changed.
2022-10-28 08:30:46 +02:00
62ae110a19
Added more to the channel/vfo summary for M17 and DMR.
...
1. added contact name,
2. added timeslot and color code.
3. added new voice prompts.
2022-10-28 08:30:46 +02:00
07d971ecfb
Hooked up repeat last voice prompt and summary to f1 if vpLevel is higher than beep.
2022-10-28 08:30:46 +02:00
8fab0b1e8c
Added vpLevel and vpPhoneticSpell to settings.
...
These take up 4 bits with 4 bits reserved for on the fly voice rate.
Not yet hooked up to menus.
2022-10-28 08:30:46 +02:00
a5985dd55d
Added custom dictionary support for common words used in Channel names and contact names (ported from AccessibleGD77).
...
Added 9 custom word prompts. (One unused).
2022-10-28 08:30:46 +02:00
537a20eef5
Add prompts for brightness and squelch
...
Added support for announcing macros for adjusting brightness and squelch.
Added voiceprompt for squelch.
2022-10-28 08:30:46 +02:00
d19e0d57ec
Added bandwidth and power announcements
...
Added bandwidth and power announcement for both macro and summary.
Added new voice prompts for bandwidth and power.
2022-10-28 08:30:46 +02:00
5a8044437c
Added CTCSS tone announcement to channel/vfo summary.
2022-10-28 08:30:46 +02:00
68926a72c4
Began work on the macros screen.
...
Toggling tone or enabling/disabling (macros 1 and 2) now supported.
Added new voice prompt for tone.
2022-10-28 08:30:46 +02:00
39cbfbe66f
Added a function which will look up a string in our string table and, if found, returns its offset and use it in order to locate the equivalent voice prompt.
...
Added logic to see if the current menu index has changed.
Added a function to speak the current menu item and its value if the menu index changes.
2022-10-28 08:30:46 +02:00
46fab4642b
Make VFO accessible through voice prompts
...
Added calls to various voice prompt functions in the UI so that VFO is basically accessible.
1. When entering digits in VFO mode.
2. When digits exceed 3, point will be announced.
3. When user enters sufficient digits to move from RX field to TX field, or if user presses Enter to move to TX field.
4. When both rx and tx frequencies have been completed.
2022-10-28 08:30:46 +02:00
af74978600
If voice prompts can't be loaded then set vpLevel to vpNone.
2022-10-28 08:30:46 +02:00
ad07a517bc
Added voice prompt verbosity levels: off, beep, low, medium and high.
2022-10-28 08:30:46 +02:00
d68f01ffbc
Insert voice prompt utility function in UI code
...
Began calling voice prompt utility functions from places such as:
1. arrowing up and down in VFO mode (read new frequencies)
2. up and down in memory mode: read new channel name.
3. up and down in VFO input mode: announce receive or transmit,
4. when starting to enter a frequency: announce receive and the first digit.
2022-10-28 08:30:46 +02:00
2373d8374c
more string extraction. moved prompt_fm and prompt_dmr to string table as they are needed by the UI.
2022-10-28 08:30:46 +02:00
fd5c5b4979
Got voice prompts code compiling. (certain blocks are commented out until we get codec2 decode figured out).
2022-10-28 08:30:46 +02:00
10ddd88f69
Cleanup code to adhere more to coding standard.
...
Got it compiling.
2022-10-28 08:30:46 +02:00
c0a04c5564
Adding voicePromptUtils.h/c which will contain the actual functions which call the building blocks to speak radio functions.
2022-10-28 08:30:46 +02:00
af76afb521
Added vpQueueFrequency to speak frequency with proper handling of decimal place and addition of MHz.
2022-10-28 08:30:46 +02:00
88619dc682
Refactored symbol handling to clean up code.
2022-10-28 08:30:46 +02:00
1d7432ae3b
Reworked all symbols so that they can be processes via a lookup rather than by individual tests. Added more flags so we can optionally speak different categories of symbols.
2022-10-28 08:30:46 +02:00
d5568b8ab3
Adding voice prompts skeleton.
2022-10-28 08:30:46 +02:00
bf8a257c2b
Implemented reference counting inside codec2 management module, allowing for multiple calls of codec_init()
2022-10-28 08:30:46 +02:00
44abedce4c
Changed stack size of codec2 thread when running under linux to prevent stack smashing from codec2_decode. Stack size is set to the default value from the OS
2022-10-28 08:30:46 +02:00
d395afd370
Fix missing splashscreen
...
Fix a bug where the splashscreen was not showing on radios with GPS
enabled.
2022-09-27 22:35:50 +02:00
91d608cc6b
Small reorganization of threads and tasks
2022-09-08 09:11:00 +02:00
b5fc9b252d
Moved code of compensating filter for MDx PWM-based DAC to a dedicated class.
2022-08-28 12:17:04 +02:00
b26d783429
Small optimisation of UI management: perform an update and render of the graphics only when necessary
2022-08-28 11:49:03 +02:00
a5a0de1428
UI: Build time font selection
2022-08-15 08:17:37 +02:00
e2137eae23
Implemented CRC of persistent data (settings and VFO state) in MDx devices
2022-08-11 17:02:04 +02:00
84d66ca1b3
Changed parameters of ui_pushEvent(): now it accepts event type and payload instead of a single element, this cleans the code up a little bit
2022-08-10 18:05:02 +02:00
f1dbfbfe1f
Fixed compilation warnings
2022-08-04 22:22:56 +02:00
1bb574c4fa
Reorganised graphics module and moved graphics.h from interfaces to core folder
2022-07-18 21:30:43 +02:00
dea0ecbf29
fix double-free when codec_terminate is called multiple times
2022-07-17 22:28:03 +02:00
bb5891aca5
Fixed setPixel swapping red and blue
2022-07-11 15:54:17 +02:00
7e8a960001
Fixed compiler warnings on MD-UV3x0 and MD-9600 targets
2022-07-10 09:23:37 +02:00
111cb9e431
Fixed compiler warnings after signedness conversion of point_t
2022-07-10 09:14:41 +02:00
ac3c8ea711
Renamed sat_t data structure to gpssat_t, changed signedness of point_t coordinates from unsigned to signed.
...
rename sat_t to gpssat_t to avoid future name collisions
allow signed values in point_t to allow relative values
fix crash when attempting to 'draw' negative absolute pixel values (like when zooming a map)
2022-07-10 09:13:47 +02:00
34c90c2485
Moved FIR filter class to a dedicated header file
2022-07-09 18:07:42 +02:00
22ce4d6925
Moved codeplug initialisation from state init function to main initialisation sequence
2022-07-02 10:47:19 +02:00
d39783af2f
Moved libc implementation of CPS I/O interface to drivers folder
2022-07-02 10:47:19 +02:00
vk7js
Silvano Seva
Niccolò Izzo
edgetriggered
Alain Carlucci
AlexandreRouma
tarxvf