a84d8fe6f0
Removed unused function from radio interface API
2024-10-12 14:46:52 +02:00
0c4a0435a8
MD3x0: update radio driver
2024-10-09 22:00:10 +02:00
8842b98a52
STM32F4xx: updated gpio driver
2024-06-21 18:00:33 +02:00
d8c0ab1c44
Dropped support for 20kHz bandwidth
...
Dropped support for 20kHz bandwith in rtx code and radio drivers. This option
is supported only by MDx radios and so far is not being used at all.
2024-02-06 19:19:47 +01:00
44385b3b25
Using signed 32-bit data type for RSSI instead of floating points
...
Switched to int32_t for RSSI representation to allow running the code also
on devices with limited resources. Defined a new ad-hoc type to still keep
the possibility of using floating points on more capable devices.
2024-02-01 11:07:20 +01:00
5b3929ef44
Moved from float to uint32_t for TX power, substituted dBm with mW in CPS channel struct
...
General code optimization allowing to reduce the overall binary size, especially
for devices without hardware floating point support. On the MD-380 (which has the
FPU) the .text size has been reduced of 4'928 bytes.
2024-02-01 11:07:20 +01:00
24c4a25b2d
Made "static" all the variables local to each translation unit
2024-02-01 11:07:20 +01:00
e2ab831c27
Added 1750Hz squelch tone on MD-3x0 radios
2023-09-22 13:58:59 +02:00
4cd1fdfcf3
Moved gpio.h to peripherals
2023-07-21 19:27:14 +02:00
313e9615a6
Removed platform_getCalibrationData() function because of limited usefulness.
...
Given that each radio driver loads its calibration data when initializing
and that the radio driver is strongly platform-specific, there is no strong
need for an intermediate redirection layer through the platform API.
2023-07-14 12:26:39 +02:00
a89a7523cb
Updated year in copyright headers
2023-02-08 16:33:02 +01:00
3c65f8834a
Added to radio driver interface two functions to enable and disable AF output towards the speaker
2022-10-28 09:47:47 +02:00
3ab36f3738
Fixed bug in MD3x0 radio driver causing underdeviation of M17 signal
2022-08-28 10:13:22 +02:00
1fa13d63d8
Modified radio drivers so that bandwidth parameter in radio configuration is ignored for operating modes different from analog FM. Fixes #100
2022-08-01 18:29:20 +02:00
316e588bc3
Updated copyright headers
2022-06-02 09:56:05 +02:00
cbd3922325
Cleanup and reorganisation of state header file, new OpenRTX CPS data structure
2022-06-01 15:04:17 +02:00
6b31a73f42
Corrected RRC gain and changed HR_C5000 modulation factor and input gain to have the correct 2.4kHz deviation when transmitting M17 with an MD3x0 radio
2022-05-27 21:48:47 +02:00
d22948a096
Fix naming error
...
Replaced FM with OPMODE_FM and DMR with OPMODE_DMR.
2022-05-27 21:48:46 +02:00
6588a6718e
Add M17 namespace in M17 related source files
...
Now M17 source files reside in the M17 namespace, the OPMODE_ prefix
was added to all opmode enums to avoid a name clash.
2022-05-27 21:48:46 +02:00
b58fbd6760
Fixed syntax error in MD3x0 and UV3x0 radio drivers
2021-10-08 19:34:08 +02:00
65a632054a
Disable CTCSS tones in M17 mode
...
Removed CTCSS modulation for M17 mode, removed FM analog specific
settings in macro menu such as tone selection, tone enable and tx
bandwidth.
2021-10-08 16:02:03 +02:00
431ba17b26
Modified HR_Cx000::setInputGain() function to accept a value expressed in dB instead of a raw binary value to be written directly inside the chip's register
2021-09-21 12:01:31 +02:00
4d3eacc144
Switched 'v_bat' and 'charge' fields of state struct from float to, respectively, uint16_t and uint8_t and updated UI functions accordingly. Rationale for this change is providing better support for future platforms without hardware floating point unit.
2021-08-14 12:56:45 +02:00
379b487f64
Added macro allowing to enable the SWD debugging interface on MDx devices (TG-272 #closed)
2021-08-12 19:46:41 +02:00
fdd50c114c
Fixed wrong mic gain value in MD3x0 radio driver
2021-06-09 11:48:25 +02:00
66552be403
Added function to radio API allowing to fine tune the radio's VCXO polarisation voltage. Currently, this functionality is effective only on MD-3x0 devices. (TG-195 #ready-for-test)
2021-06-03 14:50:47 +02:00
b29b24fdc0
Implemented RX tone squelch on MD-UV3x0 and GDx (TG-43)
2021-06-02 12:44:46 +02:00
4d68f02ab4
Updated documetation for radio.h API, removed old baseband C source files.
2021-05-29 08:20:12 +02:00
bbdfdd1068
Added support for MD-380 VHF devices. (TG-188)
2021-05-29 08:20:12 +02:00
f0dfd7036f
Fixed bug in OpMode_FM.cpp which prevented entering in RX mode, removed code for setting input gain in HR_C5000 driver, modified meson.build to make it compile the new sources
2021-05-29 08:20:12 +02:00
850e3580ed
New radio driver for MD-3x0 platform, still requiring a bit of debugging
2021-05-29 08:20:12 +02:00
Silvano Seva
Niccolò Izzo