ad1beffcf3
ttwrplus: implemented PMU interrupts handling
...
TG-553
2023-09-20 21:08:35 +02:00
2dabacebd8
ttwrplus: Implement power control on SA8x8
...
Implemented power control in T-TWR Plus by using the embedded switch
(RADIO_PWR) that controls the H/L pin of the SA868.
TG-553
2023-09-20 21:08:35 +02:00
d935532fc4
ttwrplus: enable GPS
...
GPS was enabled using UART1 and Zephyr message queues.
UI is a bit crushed on the small 128x64 screen but hardware works as expected.
TG-553
2023-09-20 21:08:35 +02:00
eeb05bcc0f
ttwrplus: fix unstable baseband startup
...
A proper baseband reset is now issued at each startup. Now OpenRTX check
for SA868 responsiveness before proceeding with radio initialization,
eliminating unstable behaviour at boot.
TG-553
2023-09-20 21:08:35 +02:00
15f5477ae0
ttwrplus: add battery voltage readout
...
Add battery voltage readout through the XPowersLib library.
TG-553
2023-09-20 21:08:35 +02:00
e05d09f0fe
ttwrplus: Set battery charging current to 500mAh to limit PMU heating and max. capacity to 80% to extend lifetime by 2.5x-3x
...
Reference article: https://batteryuniversity.com/article/bu-808-how-to-prolong-lithium-based-batteries
2023-09-20 21:08:35 +02:00
8e8daa78c8
ttwrplus: implement PMU support
...
Begin implementing PMU, now successfully read and write registers, need
to implement button functionality, battery voltage readout, charge
detection etc.
TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo
Federico Amedeo Izzo