009930f914
Moved get/set of current time to platform interface API
2023-07-21 07:58:29 +02:00
8019b29947
Moved the setBacklightLevel() API function from platform.h to display.h
2023-07-14 12:26:47 +02:00
163a3df607
Refactored MDx backlight driver
2023-07-14 12:26:47 +02:00
313e9615a6
Removed platform_getCalibrationData() function because of limited usefulness.
...
Given that each radio driver loads its calibration data when initializing
and that the radio driver is strongly platform-specific, there is no strong
need for an intermediate redirection layer through the platform API.
2023-07-14 12:26:39 +02:00
6d58230c8c
Module17: set threshold for detection of hardware rev 0.1e to 3V
2023-07-13 09:12:45 +02:00
933d291154
Made hwInfo struct const and statically initialized where dynamic loading is not needed.
...
Changed the hwInfo variable to static const in all the platformw where
the information are not loaded from NVM. Doing so puts the variable in
.rodata section and spares a tiny amount of RAM and FLASH.
2023-07-13 08:49:25 +02:00
beca0ea093
Module17: implemented control of power on switch, introduced in rev 0.1e
2023-06-14 21:57:33 +02:00
694181df92
Module17: implemented detection of hardware version
2023-06-14 21:50:12 +02:00
1afd868d64
Renamed "lcd_type" field of hardare info struct to "hw_version"
2023-06-14 21:30:52 +02:00
c862638fd1
Created calibration data structure for Module17
2023-05-29 22:12:40 +02:00
a9a6217d89
Removed RTC_PRESENT macro for Module 17 since hardware does not have an RTC
2023-05-29 22:12:40 +02:00
a89a7523cb
Updated year in copyright headers
2023-02-08 16:33:02 +01:00
853db877e9
Link beep to volume knob appropriately.
2022-10-28 08:30:47 +02:00
94424ce908
Adding beeps to MD380 platform.c.
2022-10-28 08:30:47 +02:00
eb89f5a55a
Now play generic beep on any key press as well as different tones when navigating the menu, when menu item wraps, and when function key latches and unlatches if voice prompt level is set to beep.
2022-10-28 08:30:47 +02:00
a1e302b19d
Got beeps working so long as you don't have ctcss set.
...
Reduced durations to sensible values.
2022-10-28 08:30:47 +02:00
0298aa897b
Implemented beeps on MD-UV3x0 platform driver.
2022-10-28 08:30:47 +02:00
e2137eae23
Implemented CRC of persistent data (settings and VFO state) in MDx devices
2022-08-11 17:02:04 +02:00
1bb574c4fa
Reorganised graphics module and moved graphics.h from interfaces to core folder
2022-07-18 21:30:43 +02:00
28929aab90
Fixed memory leaks at linux emulator shutdown
2022-07-02 10:47:19 +02:00
2fc89bf583
Renamed 'HAS_GPS' and 'HAS_RTC' to, respectively, 'GPS_PRESENT' and 'RTC_PRESENT'
2022-07-02 10:28:28 +02:00
f1b1dc2034
Changed battery type for Module17 to BAT_NONE
2022-06-21 12:06:20 +02:00
6b2affe2cd
Fixed setting of RSSI level value from linux emulator shell
2022-06-09 23:11:01 +02:00
c966f82352
Fixed setting of battery voltage and transmission of PTT press signal from linux emulator shell
2022-06-09 23:02:38 +02:00
5c94d33b6b
Reorganised source code of linux emulator main engine
2022-06-09 22:48:51 +02:00
763eb0c2be
In SDL engine force display rendering when brightness texture is changed
2022-06-09 22:48:51 +02:00
980fa32e73
Reorganised source code of linux emulator SDL engine
2022-06-09 22:48:41 +02:00
316e588bc3
Updated copyright headers
2022-06-02 09:56:05 +02:00
fda0fed5e7
Moved constant specifying sample rate for M17 baseband decoding from hwconfig.h files to M17Demodulator class
2022-05-27 21:48:47 +02:00
4b8685b853
Changed gain and added an offset at tx RRC stage only for Module 17 to compensate for an hardware bug
2022-05-27 21:48:47 +02:00
94fdf44954
Biased Module 17 baseband DAC output to Vdd/2 when idle
2022-05-27 21:48:47 +02:00
2d8c696a09
Complete M17 demodulator implementation
...
Make quantization work also on DC offset signal
Add samples plot code
Fix bug in buffer wrap around
Fix oob memory access in M17 modulator
Update tests with DC offset signal
Switch to 48KHz sample rate for Module17 and MD380
Add DC biasing script
TG-81
2022-05-27 21:48:46 +02:00
f9c23452bc
Add plotting function to graphics library
...
Added plotting function to graphics library which is native C++, so
refactored the graphics source file to allow that, consequently adapted
the hwconfig header files to be included also in C++ sources.
Propagated compile flags also to C++ sources, including asan what was
previously disabled for C++ compilation units.
TG-81
2022-05-27 21:48:46 +02:00
ae26cca46f
Remove SPS
...
Now M17_SAPLES_PER_SYMBOL is computed dinamically from sample rate.
TG-81
2022-05-27 21:48:46 +02:00
3163dd49d7
Add M17 demodulator code and tests
...
Added implementation of the M17 4FSK demodulator, including clock
recovery, phase detection, and quantization algorithms.
A testsuite is also included to do regression testing against a
reference baseband pre-generated and the corresponding reference
bitstream.
A 1% BER is still present due to a fault likely in the RRC filtering,
since the eye diagram of the filtered stream is bad.
TG-81
2022-05-27 21:48:46 +02:00
5ffd6e5c43
Fixed compilation errors with MD-9600 and Module 17 targets
2022-03-24 19:09:00 +01:00
624dca2b97
Renamed macro DISABLE_KEEP_ON to RUNNING_TESTSUITE
2022-03-05 09:09:25 +01:00
a5209d6f52
Modified range for display backlight level from 0 - 255 to 0 - 100, set minimum allowed level to 5.
2022-02-26 15:45:41 +01:00
ce5ff047ee
Add NVM for settings and VFO on linux platform
2022-01-15 14:02:19 +01:00
ade9c47f71
Implement platform_setBacklightLevel for linux
2022-01-03 14:51:22 +01:00
3776b30121
Automatically disabling the power keep switch when running testsuites, as those may never call platform_terminate()
2022-01-03 14:49:25 +01:00
7c978470c2
Add brightness support for the emulator
2021-12-23 14:52:25 +01:00
9dc0819b8b
Linux emulator code cleanup and refactoring
2021-12-23 14:52:25 +01:00
18fb916834
Remove all tabs
2021-12-23 14:52:25 +01:00
d4300c9c04
Fix Allman bracing
2021-12-23 14:52:25 +01:00
e2baf5a833
Document functions with Doxygen format
2021-12-23 14:52:25 +01:00
992d6be6eb
Ensure we do not render before the framebuffer copy completes
2021-12-23 14:52:25 +01:00
82699f3d07
Implement an SDL main loop inside the Main Thread
2021-12-23 14:52:25 +01:00
51acccaec2
Don't pump SDL events outside from the main thread
2021-12-23 14:52:25 +01:00
4eb4e43cbe
Activated GPIO pull-up resistors on MD3x0 PTT lines, as it seems that RT3 radios lack a physical pull-up resistor on those GPIOs. See #52
2021-12-23 14:52:25 +01:00
2fdbf0f236
Initial support for I2C soft pots on Module17
...
Initial support for I2C soft pots on Module17, ADC1 driver for input voltage
reading. Cherry-picked from Mathis DB9MAT repo.
TG-398
2021-12-23 14:52:25 +01:00
6aece95e98
Fixed license header
2021-11-27 08:23:59 +01:00
55c0b0d868
Module17 platform changes for revision 0.1c
2021-11-27 08:09:39 +01:00
4811838cb8
Module17: implemented keyboard driver, updated display, output audio stream and platform drivers
2021-11-24 19:53:48 +01:00
7bfa2336d7
Driver for SSD1306 SPI display driver on Module17
2021-11-24 19:53:48 +01:00
a0d9161e1d
Very preliminary support for Module17, providing only the files and configurations essential for a minimal bootstrap of the OpenRTX firmware
2021-11-24 19:53:48 +01:00
036f74c69e
Removed call to rtc_terminate inside MDx platform_terminate, as this freezed RTC on radio power off
2021-11-12 22:46:11 +01:00
691b388228
Implemented load/save of settings and VFO configuration for MDx devices
2021-11-09 19:28:23 +01:00
588265fa3d
astyle applied to try and match current OpenRTX style - just doesn't work on the header block
2021-11-03 19:20:42 +01:00
f451ff8aae
unused args cast to void instead of __attribute__
2021-11-03 19:20:42 +01:00
3ded05a6dc
update the linux emulator scriptability for the knob values
2021-11-03 19:20:42 +01:00
45228e226e
just the emulator shell broken out
2021-11-03 19:20:42 +01:00
5113a39f2a
Enabled M17 support also in MD-UV3x0 radio driver
2021-09-21 12:02:32 +02:00
92ea1535ff
Moved definition of 'PLATFORM_LINUX' macro from hwconfig to meson.build, added '-std=c++14' compilation flag to compile arguments for linux platform, added missing includes to M17Utils.h
2021-09-03 16:44:57 +02:00
9650ff5925
Removed macro disabling by default the USB virtual COM port, which is now permanently enabled.
2021-08-26 10:22:55 +02:00
a7acc3301b
Modified 'platform_getVbat' API: now it returns an uint16_t value containing the battery voltage in millivolt
2021-08-14 12:47:21 +02:00
8e0a5d1c0f
Made 'platform_getVolumeLevel' and 'platform_getMicLevel' API functions return a normalised 8 bit value ranging from 0 to 255 (TG-293 #closed)
2021-08-14 10:18:55 +02:00
c69c2be478
Fixed external microphone sticky PTT button on MD-UV380
2021-08-14 10:02:34 +02:00
07e1f28f79
Fix sticky PTT button on MD-UV380 by removing double initialization of PTT_SW gpio.
2021-08-11 20:53:54 +02:00
b80ddc1145
Implemented reading of PTT status from external microphone on MD-3x0 and MD-UV3x0
2021-07-10 21:52:15 +02:00
a8b838bd47
On Linux target emulate PTT button with P key
2021-07-08 20:24:27 +02:00
1f74c0abb7
Add `VCOM_ENABLED` define to disable VCOM that is currently broken
2021-06-06 10:13:51 +02:00
96abae4bad
Temporary workaround to fix compilation error with MD-9600 due to not yet defined GPIOs for audio control, still to be identified.
2021-06-05 21:43:10 +02:00
c653535e68
Remove old band and limits defines, now replaced by hwInfo_t
2021-06-05 11:27:20 +02:00
f5c9d97e49
Check frequency limits against hwInfo_t, not hardcoded defines
2021-06-05 10:47:52 +02:00
c0ecf2e13f
Basic audio management module, controlling only speaker PA and microphone preamplifier. TG-61
2021-04-12 19:10:13 +02:00
7209414a2b
Fixed error in ADC conversion sequence in MD-3x0 platforms, improved behaviour of 'platform_pwrButtonStatus' in targets having the power switch on the volume knob.
2021-04-11 18:19:08 +02:00
1e7c2ceac3
Fixed missing ';' in GD-77 and DM-1801 implementations of 'platform_pwrButtonStatus'
2021-04-11 12:47:22 +02:00
1dfcf1b75f
Added missing implementation of 'platform_pwrButtonStatus' in linux platform.c
2021-04-11 12:43:17 +02:00
4b30a66735
Added 'platform_pwrButtonStatus' API function, which returns the current status of the power button/knob. Implemented power on/off mechanism on MD-9600
2021-04-11 12:38:20 +02:00
93d2ede113
Add default contrast setting define
2021-04-11 09:10:08 +02:00
944a597d33
Created low-level driver for management of channel selector knobs with quadrature encoder
2021-04-10 19:29:35 +02:00
56c598da7e
Created low-level driver for backlight level management
2021-04-10 14:12:15 +02:00
db6b427513
Support for palmtop mic keys in MD9600 keyboard driver
2021-04-10 12:16:21 +02:00
795d8d4451
Implemented input voltage measurement on MD-9600
2021-04-10 12:16:21 +02:00
f9570f3636
Temporary hand-filled hwInfo for MD-9600
2021-04-10 12:16:20 +02:00
e46c77a300
Enabled ADC and NVM manager on MD-9600
2021-04-10 12:15:29 +02:00
e157fc361d
Restructured ADC1_MDx code and extended its support also to MD-9600
2021-04-10 12:15:28 +02:00
6b541a8ba1
Platform interface and initial keyboard driver for MD-9600
2021-04-10 12:13:34 +02:00
a2578ba42d
Propagating change of the return value of platform_getChannelSelector
2021-04-03 09:28:27 +02:00
e5c5ee90f2
Add support for encoder knob on MD-UV380
...
Added: qdec, a header only quadrature encoder library
Added: EXTI15_10_IRQHandler to handle the encoder knob
Changed: platform_init() for the MD-UV380 now configures the EXTI15_10
interrupt.
Changed: platform_getChSelector now returns signed int8
Changed: size of settings_t.valid went from 6 to 7
Without this change, pressing the macro button crashes the radio, I
haven't investigated and I don't remember how I found that solution.
Changed: meson.build includes the qdec library
2021-04-03 09:21:47 +02:00
1d8596e3c8
Renamed 'MD-UV380' folder and 'PLATFORM_MDUV380' define to, respectively, 'MD-UV3x0' and 'PLATFORM_MDUV3x0' to make them consistent with the meson build target
2021-04-01 08:48:56 +02:00
4ed16fb51c
Enabled measurement of volume level on MD-UV3x0
2021-03-20 11:51:35 +01:00
07d886a442
Fix for PTT gpio non going back to logic high when the corresponding button is released
2021-03-20 11:51:35 +01:00
a5120ffddc
Radio driver for MD-UV3x0 targets
2021-03-20 11:51:35 +01:00
2ece3794a0
AT1846S driver for MD-UV3x0
2021-03-20 11:51:35 +01:00
f9332f5ce3
Implemented I2C routines for AT1846S on MD-UV3x0
2021-03-20 11:51:35 +01:00
5b44cb9a9f
On GDx devices deferred the loading of calibration data from 'platform_init' to the first call of 'platform_getCalibrationData' to avoid having the screen blank for a while when booting
2021-03-14 17:08:12 +01:00
5d0c7f3d9c
Removed I2C initialisation from GDx EEPROM driver, as the I2C bus is already initialised in platform_init() and the double initialisation made some radios freeze on the splash screen
2021-03-14 11:46:00 +01:00
fb9d8afb6c
Adapted MK22 vcom sources to miosix kernel but not activating it. Reconfigured x86 emulator.
2021-03-13 09:16:06 +01:00
Silvano Seva
Wojciech Kaczmarski
vk7js
Niccolò Izzo
Alessio Caiazza
Mathis Schmieder
Mathis Schmieder
tarxvf
Federico Amedeo Izzo
Caleb Jamison