/***************************************************************************
 *   Copyright (C) 2021 by Federico Amedeo Izzo IU2NUO,                    *
 *                         Niccolò Izzo IU2KIN                             *
 *                         Silvano Seva IU2KWO                             *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 3 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 *   This program is distributed in the hope that it will be useful,       *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 *   GNU General Public License for more details.                          *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this program; if not, see <http://www.gnu.org/licenses/>   *
 ***************************************************************************/

#include <interfaces/gpio.h>
#include <interfaces/nvmem.h>
#include <interfaces/platform.h>
#include <hwconfig.h>
#include <string.h>
#include <backlight.h>
#include <ADC1_MDx.h>
#include <calibInfo_MDx.h>
#include <toneGenerator_MDx.h>
#include <interfaces/rtc.h>
#include <SPI2.h>

hwInfo_t hwInfo;

void platform_init()
{
    gpio_setMode(CH_SELECTOR_0, INPUT_PULL_UP);
    gpio_setMode(CH_SELECTOR_1, INPUT_PULL_UP);

    gpio_setMode(PTT_SW, INPUT);

    gpio_setMode(PWR_SW, OUTPUT);
    gpio_setPin(PWR_SW);

    /*
     * Initialise ADC1, for vbat, RSSI, ...
     * Configuration of corresponding GPIOs in analog input mode is done inside
     * the driver.
     */
    adc1_init();

    /*
     * Initialise SPI2 for external flash and LCD
     */
    gpio_setMode(SPI2_CLK, ALTERNATE);
    gpio_setMode(SPI2_SDO, ALTERNATE);
    gpio_setMode(SPI2_SDI, ALTERNATE);
    gpio_setAlternateFunction(SPI2_CLK, 5); /* SPI2 is on AF5 */
    gpio_setAlternateFunction(SPI2_SDO, 5);
    gpio_setAlternateFunction(SPI2_SDI, 5);

    spi2_init();

    /* TODO temporary initialisation */
    memset(&hwInfo, 0x00, sizeof(hwInfo));
    hwInfo.uhf_maxFreq = FREQ_LIMIT_UHF_HI/1000000;
    hwInfo.uhf_minFreq = FREQ_LIMIT_UHF_LO/1000000;
    hwInfo.vhf_maxFreq = FREQ_LIMIT_VHF_HI/1000000;
    hwInfo.vhf_minFreq = FREQ_LIMIT_VHF_LO/1000000;
    hwInfo.uhf_band    = 1;
    hwInfo.vhf_band    = 1;
    hwInfo.lcd_type    = 0;
    memcpy(hwInfo.name, "MD-9600", 7);
    hwInfo.name[8] = '\0';

    nvm_init();                      /* Initialise non volatile memory manager */
    toneGen_init();                  /* Initialise tone generator              */
    rtc_init();                      /* Initialise RTC                         */
    backlight_init();                /* Initialise backlight driver            */
}

void platform_terminate()
{
    /* Shut down backlight */
    backlight_terminate();

    /* Shut down all the modules */
    adc1_terminate();
    toneGen_terminate();
    rtc_terminate();

    /* Finally, remove power supply */
    gpio_clearPin(PWR_SW);
}

float platform_getVbat()
{
    /*
     * Battery voltage is measured through an 1:5.7 voltage divider and
     * adc1_getMeasurement returns a value in mV. Thus, to have effective
     * battery voltage multiply by the ratio and divide by 1000
     */
    return (adc1_getMeasurement(ADC_VBAT_CH)*5.7f)/1000.0f;
}

float platform_getMicLevel()
{
    return 0.0f;
}

float platform_getVolumeLevel()
{
    return 0.0f;
}

int8_t platform_getChSelector()
{
    static const uint8_t rsPositions[] = { 1, 4, 2, 3};
    int pos = gpio_readPin(CH_SELECTOR_0)
            | (gpio_readPin(CH_SELECTOR_1) << 1);

    return rsPositions[pos];
}

bool platform_getPttStatus()
{
    /* PTT line has a pullup resistor with PTT switch closing to ground */
    return (gpio_readPin(PTT_SW) == 0) ? true : false;
}

void platform_ledOn(led_t led)
{
    /* No LEDs on this platform */
    (void) led;
}

void platform_ledOff(led_t led)
{
    /* No LEDs on this platform */
    (void) led;
}

void platform_beepStart(uint16_t freq)
{
    /* TODO */
    (void) freq;
}

void platform_beepStop()
{
    /* TODO */
}

const void *platform_getCalibrationData()
{
    return NULL;
}

const hwInfo_t *platform_getHwInfo()
{
    return &hwInfo;
}

/*
 * NOTE: implementation of this API function is provided in
 * platform/drivers/backlight/backlight_MDx.c
 */
// void platform_setBacklightLevel(uint8_t level)