From 10c33dacdfe59bbdbd44d7c5107a7b503e10a37b Mon Sep 17 00:00:00 2001 From: "Maciek \"mab122\" Bator" Date: Sat, 24 Jan 2026 01:04:38 +0100 Subject: [PATCH] fixes typo and remove empty magnets line --- README.md | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/README.md b/README.md index 5759d70..351fa18 100644 --- a/README.md +++ b/README.md @@ -3,12 +3,11 @@ Point of this repository is to document instructions for creating DIY clone of [ Ideas as for now: - Plate - use old 3d printing bed. -- magnets - - bolt sleeves - https://pl.aliexpress.com/item/1005008554837674.html (probably M3) - ball joint **ball** - https://pl.aliexpress.com/item/1005006472765824.html (thread probably M3, diameter?) ball could be with threaded hole ball could be with threaded through-hole that could be use to lock it into ring magnet from other side so that when you pull on tool you won't leave magnet on the plate https://pl.aliexpress.com/item/1005008010721808.html - ball joint **socket** - either [ring magnet](https://pl.aliexpress.com/item/1005010317034738.html) or ["screw through" magnet](https://pl.aliexpress.com/item/1005010016604682.html) -- the clamps just 3d printed or chearp aluminium flat bar used for half (or both) of it for electirc connection feature +- the clamps just 3d printed or chearp aluminium flat bar used for half (or both) of it for electric connection feature - springs https://pl.aliexpress.com/item/1005005402716572.html