From 24ff771e2c217991df2522a5f73b85181d0e33e7 Mon Sep 17 00:00:00 2001 From: "Maciek \"mab122\" Bator" Date: Sat, 24 Jan 2026 01:01:41 +0100 Subject: [PATCH] adds initial README --- README.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 README.md diff --git a/README.md b/README.md new file mode 100644 index 0000000..5759d70 --- /dev/null +++ b/README.md @@ -0,0 +1,14 @@ +# DIYFIXIO +Point of this repository is to document instructions for creating DIY clone of [omnifixio](https://omnifixo.com/). + +Ideas as for now: +- Plate - use old 3d printing bed. +- magnets - +- bolt sleeves - https://pl.aliexpress.com/item/1005008554837674.html (probably M3) +- ball joint **ball** - https://pl.aliexpress.com/item/1005006472765824.html (thread probably M3, diameter?) + ball could be with threaded hole + ball could be with threaded through-hole that could be use to lock it into ring magnet from other side + so that when you pull on tool you won't leave magnet on the plate https://pl.aliexpress.com/item/1005008010721808.html +- ball joint **socket** - either [ring magnet](https://pl.aliexpress.com/item/1005010317034738.html) or ["screw through" magnet](https://pl.aliexpress.com/item/1005010016604682.html) +- the clamps just 3d printed or chearp aluminium flat bar used for half (or both) of it for electirc connection feature +- springs https://pl.aliexpress.com/item/1005005402716572.html