Use "repository" consistently over "project"

We were using the two pretty interchangeably. "Project" should only be
used to refer to the repository payload. "Repository" should be used
when referring to the resource that is fetched, synced, cloned, checked
out etc.

rad.1.adoc

@@ -164,7 +164,7 @@ a working copy and run the *rad init* command:
     $ cd my-repo
     $ rad init
 
-You will be prompted to enter a project name and default branch. Once the
+You will be prompted to enter a repository name and default branch. Once the
 repository is created, the Repository Identifier (RID) will be printed.
 Share this with collaborators so that they can clone your repository.
 

radicle-cli/examples/rad-auth.md

@@ -10,8 +10,8 @@ Initializing your radicle 👾 identity
 ✓ Your Radicle DID is did:key:z6MknSLrJoTcukLrE435hVNQT4JUhbvWLX4kUzqkEStBU8Vi. This identifies your device. Run `rad self` to show it at all times.
 ✓ You're all set.
 
-To create a radicle project, run `rad init` from a Git repository with at least one commit.
+To create a Radicle repository, run `rad init` from a Git repository with at least one commit.
-To clone a project, run `rad clone <rid>`. For example, `rad clone rad:z3gqcJUoA1n9HaHKufZs5FCSGazv5` clones the Radicle 'heartwood' project.
+To clone a repository, run `rad clone <rid>`. For example, `rad clone rad:z3gqcJUoA1n9HaHKufZs5FCSGazv5` clones the Radicle 'heartwood' repository.
 To get a list of all commands, run `rad help`.
 ```
 

radicle-cli/examples/rad-clone-all.md

@@ -11,7 +11,7 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji --scope all
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 ```
 
 We can now have a look at the new working copy that was created from the cloned

radicle-cli/examples/rad-clone-connect.md

@@ -17,5 +17,5 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 ```

radicle-cli/examples/rad-clone-directory.md

@@ -14,7 +14,7 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji --scope followed Developer/Radicle
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd [..]/Developer/Radicle` to go to the project directory.
+Run `cd [..]/Developer/Radicle` to go to the repository directory.
 ```
 
 Note that attempting to clone into a directory that already exists,

radicle-cli/examples/rad-clone.md

@@ -14,7 +14,7 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji --scope followed
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 ```
 
 We can now have a look at the new working copy that was created from the cloned

radicle-cli/examples/rad-fork.md

@@ -22,7 +22,7 @@ wish to fork:
 
 ```
 $ rad fork rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji
-✓ Forked project rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji for z6Mkt67GdsW7715MEfRuP4pSZxJRJh6kj6Y48WRqVv4N1tRk
+✓ Forked repository rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji for z6Mkt67GdsW7715MEfRuP4pSZxJRJh6kj6Y48WRqVv4N1tRk
 ```
 
 Now, if we `rad inspect` the project's refs again we will see that we

radicle-cli/examples/rad-id-collaboration.md

@@ -20,7 +20,7 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji --scope followed
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 $ cd ./heartwood
 $ git push rad master
 ```
@@ -78,7 +78,7 @@ $ rad clone rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji --scope followed
 │ Radicle Heartwood Protocol & Stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 $ cd ./heartwood
 $ git push rad master
 ```

radicle-cli/examples/rad-init-private-clone-seed.md

@@ -41,5 +41,5 @@ $ rad clone rad:z2ug5mwNKZB8KGpBDRTrWHAMbvHCu --seed z6MknSLrJoTcukLrE435hVNQT4J
 │ radicle heartwood protocol & stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 ```

radicle-cli/examples/rad-init-private.md

@@ -3,11 +3,11 @@ Alice can initialize a *private* repo using the `--private` flag.
 ```
 $ rad init --name heartwood --description "radicle heartwood protocol & stack" --no-confirm --private
 
-Initializing private radicle 👾 project in .
+Initializing private radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z2ug5mwNKZB8KGpBDRTrWHAMbvHCu.
+Your Repository ID (RID) is rad:z2ug5mwNKZB8KGpBDRTrWHAMbvHCu.
 You can show it any time by running `rad .` from this directory.
 
 You have created a private repository.

radicle-cli/examples/rad-init-sync-not-connected.md

@@ -1,18 +1,18 @@
-When initializing a project without any peer connections, we get this output:
+When initializing a repository without any peer connections, we get this output:
 
 ```
 $ rad init --name heartwood --description "Radicle Heartwood Protocol & Stack" --no-confirm --public --scope followed
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
+Your Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
 You can show it any time by running `rad .` from this directory.
 
 ✗ Announcing.. <canceled>
 
-You are not connected to any peers. Your project will be announced as soon as your node establishes a connection with the network.
+You are not connected to any peers. Your repository will be announced as soon as your node establishes a connection with the network.
 Check for peer connections with `rad node status`.
 
 To push changes, run `git push`.

radicle-cli/examples/rad-init-sync-preferred.md

@@ -1,18 +1,18 @@
-Let's try initializing a new project with a preferred seed configured.
+Let's try initializing a new repository with a preferred seed configured.
 
 ```
 $ rad init --name heartwood --description "Radicle Heartwood Protocol & Stack" --no-confirm --public --scope followed
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z3Rry7rpdWuGpfjPYGzdJKQADsoNW.
+Your Repository ID (RID) is rad:z3Rry7rpdWuGpfjPYGzdJKQADsoNW.
 You can show it any time by running `rad .` from this directory.
 
-✓ Project successfully synced to 1 node(s).
+✓ Repository successfully synced to 1 node(s).
 
-Your project has been synced to the network and is now discoverable by peers.
+Your repository has been synced to the network and is now discoverable by peers.
 View it in your browser at:
 
     https://app.radicle.xyz/nodes/[...]/rad:z3Rry7rpdWuGpfjPYGzdJKQADsoNW

radicle-cli/examples/rad-init-sync-timeout.md

@@ -4,17 +4,17 @@ as the node will keep attempting to sync in the background.
 ```
 $ rad init --name heartwood --description "Radicle Heartwood Protocol & Stack" --no-confirm --public --scope followed
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z3Rry7rpdWuGpfjPYGzdJKQADsoNW.
+Your Repository ID (RID) is rad:z3Rry7rpdWuGpfjPYGzdJKQADsoNW.
 You can show it any time by running `rad .` from this directory.
 
-✓ Project successfully announced to the network.
+✓ Repository successfully announced to the network.
 
-Your project has been announced to the network and is now discoverable by peers.
+Your repository has been announced to the network and is now discoverable by peers.
-You can check for any nodes that have replicated your project by running `rad sync status`.
+You can check for any nodes that have replicated your repository by running `rad sync status`.
 
 To push changes, run `git push`.
 ```

radicle-cli/examples/rad-init-sync.md

@@ -1,21 +1,21 @@
 
-To create your first radicle project, navigate to a git repository, and run
+To create your first radicle repository, navigate to a git repository, and run
 the `init` command:
 
 ```
 $ rad init --name heartwood --description "Radicle Heartwood Protocol & Stack" --no-confirm --public --scope followed
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
+Your Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
 You can show it any time by running `rad .` from this directory.
 
-✓ Project successfully announced to the network.
+✓ Repository successfully announced to the network.
 
-Your project has been announced to the network and is now discoverable by peers.
+Your repository has been announced to the network and is now discoverable by peers.
-You can check for any nodes that have replicated your project by running `rad sync status`.
+You can check for any nodes that have replicated your repository by running `rad sync status`.
 
 To push changes, run `git push`.
 ```

radicle-cli/examples/rad-init-with-existing-remote.md

@@ -22,14 +22,14 @@ Then we initialize.
 ```
 $ rad init --name heartwood --description "Heartwood Protocol & Stack" --no-confirm --public
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:z2D6wQnKapY7dn5meBnbH2rUKNZbT.
+Your Repository ID (RID) is rad:z2D6wQnKapY7dn5meBnbH2rUKNZbT.
 You can show it any time by running `rad .` from this directory.
 
-Your project will be announced to the network when you start your node.
+Your repository will be announced to the network when you start your node.
 You can start your node with `rad node start`.
 To push changes, run `git push rad master`.
 ```

radicle-cli/examples/rad-init.md

@@ -1,23 +1,23 @@
 
-To create your first radicle project, navigate to a git repository, and run the
+To create your first radicle repository, navigate to a git repository, and run the
 `init` command.  Make sure you have [authenticated](../rad-auth.md) beforehand.
 
 ```
 $ rad init --name heartwood --description "Radicle Heartwood Protocol & Stack" --no-confirm --public -v
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 {
   "name": "heartwood",
   "description": "Radicle Heartwood Protocol & Stack",
   "defaultBranch": "master"
 }
 
-Your project's Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
+Your Repository ID (RID) is rad:z42hL2jL4XNk6K8oHQaSWfMgCL7ji.
 You can show it any time by running `rad .` from this directory.
 
-Your project will be announced to the network when you start your node.
+Your repository will be announced to the network when you start your node.
 You can start your node with `rad node start`.
 To push changes, run `git push`.
 ```

radicle-cli/examples/rad-patch-pull-update.md

@@ -1,21 +1,21 @@
 Let's look at how patch updates work.
 
-Alice creates a project and Bob clones it.
+Alice creates a repository and Bob clones it.
 
 ``` ~alice
 $ rad init --name heartwood --description "radicle heartwood protocol & stack" --no-confirm --public
 
-Initializing public radicle 👾 project in .
+Initializing public radicle 👾 repository in .
 
-✓ Project heartwood created.
+✓ Repository heartwood created.
 
-Your project's Repository ID (RID) is rad:zhbMU4DUXrzB8xT6qAJh6yZ7bFMK.
+Your Repository ID (RID) is rad:zhbMU4DUXrzB8xT6qAJh6yZ7bFMK.
 You can show it any time by running `rad .` from this directory.
 
-✓ Project successfully announced to the network.
+✓ Repository successfully announced to the network.
 
-Your project has been announced to the network and is now discoverable by peers.
+Your repository has been announced to the network and is now discoverable by peers.
-You can check for any nodes that have replicated your project by running `rad sync status`.
+You can check for any nodes that have replicated your repository by running `rad sync status`.
 
 To push changes, run `git push`.
 ```
@@ -33,7 +33,7 @@ $ rad clone rad:zhbMU4DUXrzB8xT6qAJh6yZ7bFMK
 │ radicle heartwood protocol & stack │
 │ 0 issues · 0 patches               │
 ╰────────────────────────────────────╯
-Run `cd ./heartwood` to go to the project directory.
+Run `cd ./heartwood` to go to the repository directory.
 ```
 
 We fork the repository by pushing to `master`, and wait for Alice to sync

radicle-cli/src/commands/auth.rs

@@ -139,11 +139,11 @@ pub fn init(options: Options) -> anyhow::Result<()> {
     term::success!("You're all set.");
     term::blank();
     term::info!(
-        "To create a radicle project, run {} from a Git repository with at least one commit.",
+        "To create a Radicle repository, run {} from a Git repository with at least one commit.",
         term::format::command("rad init")
     );
     term::info!(
-        "To clone a project, run {}. For example, {} clones the Radicle 'heartwood' project.",
+        "To clone a repository, run {}. For example, {} clones the Radicle 'heartwood' repository.",
         term::format::command("rad clone <rid>"),
         term::format::command("rad clone rad:z3gqcJUoA1n9HaHKufZs5FCSGazv5")
     );

radicle-cli/src/commands/checkout.rs

@@ -16,13 +16,15 @@ use crate::terminal::args::{Args, Error, Help};
 
 pub const HELP: Help = Help {
     name: "checkout",
-    description: "Checkout a project into the local directory",
+    description: "Checkout a repository into the local directory",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage
 
     rad checkout <rid> [--remote <did>] [<option>...]
 
+    Creates a working copy from a repository in local storage.
+
 Options
 
     --remote <did>  Remote peer to checkout
@@ -63,7 +65,7 @@ impl Args for Options {
 
         Ok((
             Options {
-                id: id.ok_or_else(|| anyhow!("a project to checkout must be provided"))?,
+                id: id.ok_or_else(|| anyhow!("a repository to checkout must be provided"))?,
                 remote,
             },
             vec![],
@@ -85,7 +87,7 @@ fn execute(options: Options, profile: &Profile) -> anyhow::Result<PathBuf> {
     let doc: Doc<_> = storage
         .repository(id)?
         .identity_doc()
-        .context("project could not be found in local storage")?
+        .context("repository could not be found in local storage")?
         .into();
     let payload = doc.project()?;
     let path = PathBuf::from(payload.name());

radicle-cli/src/commands/clean.rs

@@ -11,7 +11,7 @@ use crate::terminal::args::{Args, Error, Help};
 
 pub const HELP: Help = Help {
     name: "clean",
-    description: "Clean a project",
+    description: "Clean a repository",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage

radicle-cli/src/commands/clone.rs

@@ -29,7 +29,7 @@ use crate::terminal::Element as _;
 
 pub const HELP: Help = Help {
     name: "clone",
-    description: "Clone a project",
+    description: "Clone a Radicle repository",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage
@@ -167,7 +167,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
     let default_branch = proj.default_branch().clone();
     let path = working.workdir().unwrap(); // SAFETY: The working copy is not bare.
 
-    // Configure repository and setup tracking for project delegates.
+    // Configure repository and setup tracking for repository delegates.
     radicle::git::configure_repository(&working)?;
     checkout::setup_remotes(
         project::SetupRemote {
@@ -205,7 +205,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         .directory
         .map_or(proj.name().to_string(), |loc| loc.display().to_string());
     term::info!(
-        "Run {} to go to the project directory.",
+        "Run {} to go to the repository directory.",
         term::format::command(format!("cd ./{location}")),
     );
 
@@ -264,7 +264,7 @@ pub fn clone<G: Signer>(
 
     let results = sync::fetch(id, mode, timeout, node)?;
     let Ok(repository) = storage.repository(id) else {
-        // If we don't have the project locally, even after attempting to fetch,
+        // If we don't have the repository locally, even after attempting to fetch,
         // there's nothing we can do.
         if results.is_empty() {
             return Err(CloneError::NoSeeds(id));

radicle-cli/src/commands/fork.rs

@@ -11,7 +11,7 @@ use crate::terminal::args::{Args, Error, Help};
 
 pub const HELP: Help = Help {
     name: "fork",
-    description: "Create a fork of a project",
+    description: "Create a fork of a repository",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage
@@ -60,14 +60,14 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         Some(rid) => rid,
         None => {
             let (_, rid) =
-                radicle::rad::cwd().context("Current directory is not a radicle project")?;
+                radicle::rad::cwd().context("Current directory is not a Radicle repository")?;
 
             rid
         }
     };
 
     rad::fork(rid, &signer, &storage)?;
-    term::success!("Forked project {rid} for {}", profile.id());
+    term::success!("Forked repository {rid} for {}", profile.id());
 
     Ok(())
 }

radicle-cli/src/commands/init.rs

@@ -28,7 +28,7 @@ use crate::terminal::Interactive;
 
 pub const HELP: Help = Help {
     name: "init",
-    description: "Initialize a project from a git repository",
+    description: "Initialize Radicle repositories",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage
@@ -37,9 +37,9 @@ Usage
 
 Options
 
-        --name <string>            Name of the project
+        --name <string>            Name of the repository
-        --description <string>     Description of the project
+        --description <string>     Description of the repository
-        --default-branch <name>    The default branch of the project
+        --default-branch <name>    The default branch of the repository
         --scope <scope>            Repository follow scope (default: all)
         --private                  Set repository visibility to *private*
         --public                   Set repository visibility to *public*
@@ -98,7 +98,7 @@ impl Args for Options {
                         .all(|c| c.is_alphanumeric() || allowed.contains(&c))
                     {
                         anyhow::bail!(
-                            "invalid project name specified with `--name`, \
+                            "invalid repository name specified with `--name`, \
                             only alphanumeric characters, '-', '_' and '.' are allowed"
                         );
                     }
@@ -109,7 +109,7 @@ impl Args for Options {
                         .value()?
                         .to_str()
                         .ok_or(anyhow::anyhow!(
-                            "invalid project description specified with `--description`"
+                            "invalid repository description specified with `--description`"
                         ))?
                         .to_owned();
 
@@ -213,7 +213,7 @@ pub fn init(options: Options, profile: &profile::Profile) -> anyhow::Result<()>
         .ok_or_else(|| anyhow!("repository head must point to a commit"))?;
 
     term::headline(format!(
-        "Initializing{}radicle 👾 project in {}",
+        "Initializing{}radicle 👾 repository in {}",
         if let Some(visibility) = &options.visibility {
             term::format::spaced(term::format::visibility(visibility))
         } else {
@@ -281,7 +281,7 @@ pub fn init(options: Options, profile: &profile::Profile) -> anyhow::Result<()>
             let proj = doc.project()?;
 
             spinner.message(format!(
-                "Project {} created.",
+                "Repository {} created.",
                 term::format::highlight(proj.name())
             ));
             spinner.finish();
@@ -315,7 +315,7 @@ pub fn init(options: Options, profile: &profile::Profile) -> anyhow::Result<()>
 
             term::blank();
             term::info!(
-                "Your project's Repository ID {} is {}.",
+                "Your Repository ID {} is {}.",
                 term::format::dim("(RID)"),
                 term::format::highlight(rid.urn())
             );
@@ -329,7 +329,7 @@ pub fn init(options: Options, profile: &profile::Profile) -> anyhow::Result<()>
             if let Err(e) = announce(rid, doc, &mut node, &profile.config) {
                 term::blank();
                 term::warning(format!(
-                    "There was an error announcing your project to the network: {e}"
+                    "There was an error announcing your repository to the network: {e}"
                 ));
                 term::warning("Try again with `rad sync --announce`, or check your logs with `rad node logs`.");
                 term::blank();
@@ -416,7 +416,7 @@ fn sync(
 
     if !replicas.is_empty() {
         spinner.message(format!(
-            "Project successfully synced to {} node(s).",
+            "Repository successfully synced to {} node(s).",
             replicas.len()
         ));
         spinner.finish();
@@ -430,7 +430,7 @@ fn sync(
         }
         Ok(SyncResult::Synced { result: None })
     } else {
-        spinner.message("Project successfully announced to the network.");
+        spinner.message("Repository successfully announced to the network.");
         spinner.finish();
 
         Ok(SyncResult::NotSynced)
@@ -450,7 +450,7 @@ pub fn announce(
             }) => {
                 term::blank();
                 term::info!(
-                    "Your project has been synced to the network and is \
+                    "Your repository has been synced to the network and is \
                     now discoverable by peers.",
                 );
                 term::info!("View it in your browser at:");
@@ -461,12 +461,12 @@ pub fn announce(
             Ok(SyncResult::Synced { result: None, .. }) => {
                 term::blank();
                 term::info!(
-                    "Your project has been synced to the network and is \
+                    "Your repository has been synced to the network and is \
                     now discoverable by peers.",
                 );
                 if !config.preferred_seeds.is_empty() {
                     term::info!(
-                        "Unfortunately, you were unable to replicate your project to \
+                        "Unfortunately, you were unable to replicate your repository to \
                         your preferred seeds."
                     );
                 }
@@ -474,11 +474,11 @@ pub fn announce(
             Ok(SyncResult::NotSynced) => {
                 term::blank();
                 term::info!(
-                    "Your project has been announced to the network and is \
+                    "Your repository has been announced to the network and is \
                     now discoverable by peers.",
                 );
                 term::info!(
-                    "You can check for any nodes that have replicated your project by running \
+                    "You can check for any nodes that have replicated your repository by running \
                     `rad sync status`."
                 );
                 term::blank();
@@ -486,14 +486,14 @@ pub fn announce(
             Ok(SyncResult::NoPeersConnected) => {
                 term::blank();
                 term::info!(
-                    "You are not connected to any peers. Your project will be announced as soon as \
+                    "You are not connected to any peers. Your repository will be announced as soon as \
                     your node establishes a connection with the network.");
                 term::info!("Check for peer connections with `rad node status`.");
                 term::blank();
             }
             Ok(SyncResult::NodeStopped) => {
                 term::info!(
-                    "Your project will be announced to the network when you start your node."
+                    "Your repository will be announced to the network when you start your node."
                 );
                 term::info!(
                     "You can start your node with {}.",

radicle-cli/src/commands/inspect.rs

@@ -134,7 +134,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         Some(rid) => rid,
         None => radicle::rad::cwd()
             .map(|(_, rid)| rid)
-            .context("Current directory is not a radicle project")?,
+            .context("Current directory is not a Radicle repository")?,
     };
 
     if options.target == Target::RepoId {
@@ -146,7 +146,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
     let storage = &profile.storage;
     let repo = storage
         .repository(rid)
-        .context("No project with the given RID exists")?;
+        .context("No repository with the given RID exists")?;
     let project = repo.identity_doc()?;
 
     match options.target {

radicle-cli/src/commands/ls.rs

@@ -9,7 +9,7 @@ use term::Element;
 
 pub const HELP: Help = Help {
     name: "ls",
-    description: "List projects",
+    description: "List repositories",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage

radicle-cli/src/commands/patch.rs

@@ -655,7 +655,7 @@ impl Args for Options {
 
 pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
     let (workdir, id) = radicle::rad::cwd()
-        .map_err(|_| anyhow!("this command must be run in the context of a project"))?;
+        .map_err(|_| anyhow!("this command must be run in the context of a repository"))?;
 
     let profile = ctx.profile()?;
     let repository = profile.storage.repository(id)?;

radicle-cli/src/commands/patch/review.rs

@@ -58,7 +58,7 @@ pub fn run(
 ) -> anyhow::Result<()> {
     let signer = term::signer(profile)?;
     let _project = repository.identity_doc().context(format!(
-        "couldn't load project {} from local state",
+        "couldn't load repository {} from local state",
         repository.id
     ))?;
     let mut patches = Patches::open(repository)?;

radicle-cli/src/commands/publish.rs

@@ -72,7 +72,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         Some(rid) => rid,
         None => radicle::rad::cwd()
             .map(|(_, rid)| rid)
-            .context("Current directory is not a radicle project")?,
+            .context("Current directory is not a Radicle repository")?,
     };
 
     let repo = profile.storage.repository_mut(rid)?;

radicle-cli/src/commands/remote.rs

@@ -20,7 +20,7 @@ use crate::terminal::{Args, Context, Help};
 
 pub const HELP: Help = Help {
     name: "remote",
-    description: "Manage a project's remotes",
+    description: "Manage a repository's remotes",
     version: env!("CARGO_PKG_VERSION"),
     usage: r#"
 Usage
@@ -177,7 +177,7 @@ impl Args for Options {
 
 pub fn run(options: Options, ctx: impl Context) -> anyhow::Result<()> {
     let (working, rid) = radicle::rad::cwd()
-        .map_err(|_| anyhow!("this command must be run in the context of a project"))?;
+        .map_err(|_| anyhow!("this command must be run in the context of a repository"))?;
     let profile = ctx.profile()?;
 
     match options.op {

radicle-cli/src/commands/sync.rs

@@ -263,7 +263,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         Some(rid) => rid,
         None => {
             let (_, rid) =
-                radicle::rad::cwd().context("Current directory is not a radicle project")?;
+                radicle::rad::cwd().context("Current directory is not a Radicle repository")?;
 
             rid
         }

radicle-cli/src/commands/watch.rs

@@ -130,7 +130,7 @@ pub fn run(options: Options, ctx: impl term::Context) -> anyhow::Result<()> {
         Some(rid) => rid,
         None => {
             let (_, rid) =
-                radicle::rad::cwd().context("Current directory is not a radicle project")?;
+                radicle::rad::cwd().context("Current directory is not a Radicle repository")?;
             rid
         }
     };

radicle/src/rad.rs

@@ -126,7 +126,7 @@ pub enum ForkError {
     Storage(#[from] storage::Error),
     #[error("payload: {0}")]
     Payload(#[from] doc::PayloadError),
-    #[error("project `{0}` was not found in storage")]
+    #[error("repository `{0}` was not found in storage")]
     NotFound(RepoId),
     #[error("repository: {0}")]
     Repository(#[from] RepositoryError),
@@ -197,7 +197,7 @@ pub enum CheckoutError {
     Git(#[from] git2::Error),
     #[error("payload: {0}")]
     Payload(#[from] doc::PayloadError),
-    #[error("project `{0}` was not found in storage")]
+    #[error("repository `{0}` was not found in storage")]
     NotFound(RepoId),
     #[error("repository: {0}")]
     Repository(#[from] RepositoryError),
@@ -295,7 +295,7 @@ pub fn remove_remote(repo: &git2::Repository) -> Result<(), RemoteError> {
     Ok(())
 }
 
-/// Get the Id of project in current working directory
+/// Get the RID of the repository in current working directory
 ///
 /// It will atempt to search parent directories if `path` did not find
 /// a git repository.