`cargo check` fails because `human-panic` and `sysinfo` require at least
1.88.0.
+++ command cargo check --release --locked --all-targets
error: rustc 1.85.0 is not supported by the following packages:
human-panic@2.0.6 requires rustc 1.88
sysinfo@0.37.2 requires rustc 1.88
Bump MSRV to fix this.
1.88.0 introduced [let chains], which in turn has `clippy` warn about
nested if statements. All of these sites are fixed in this change.
1.87.0 introduced [`is_multiple_of`], which is a more readable version
of `x % y == 0`.
[let chains]: https://blog.rust-lang.org/2025/06/26/Rust-1.88.0/#let-chains
[`is_multiple_of`]: https://doc.rust-lang.org/std/primitive.usize.html#method.is_multiple_of
- Fixes a bug where the log level set in the config file was
ignored: `Logger` and `StderrLogger` captured the level in a
`self.level` field at construction time and checked it in
`Log::enabled`. After config was loaded, the global
`log::set_max_level` was updated but `self.level` was not,
so verbose messages were dropped by the per-instance filter
even when the global filter allowed them.
- Make `log::set_max_level` the single source of truth: remove
the `level` field and have `Log::enabled` defer to
`log::max_level()` so the two filters can no longer drift.
- Update call sites to construct loggers without a level.
- Disable the structured logger's internal filter (set to "trace") so
that it also falls back to `log::set_max_level`.
The name `print_inline` was used because, previously, the `print`
function name was taken.
This has now changed, allowing the rename of this function to happen.
The name `print` was used because, previously, the `println`
function name was taken.
This has now changed, allowing the rename of this function to happen.
Prevent `rad` from panicking when its stdout is a closed pipe, e.g.
when running `rad config | head`.
The broken pipes are handled at the output boundaries using three
layers of defence:
1. Inner: Route all stdout output through `term::print()` and
`term::print_inline()`, which use explicit `writeln!`/`write!` to
a locked stdout and silently ignore write errors. All `println!`
calls in `radicle-cli` and `radicle-term` are converted.
2. Middle: Catch `BrokenPipe` errors that propagate up via `anyhow`
from subcommands in `main::run()`, and exit cleanly with code 0.
3. Outer: Install a panic hook that intercepts `println!` panics
containing "Broken pipe" (from dependencies like clap) and exits
cleanly, chained in front of human_panic's hook.
To prevent regressions, `#![deny(clippy::print_stdout)]` is added to
`radicle-cli`, requiring all future stdout output to go through the
safe `term::` functions.
Note: `eprintln!` calls (stderr) are not handled, as broken stderr
pipes are extremely rare in practice.
`fn sha1_zero` can be `const fn`, and since it does not take arguments,
it can just be a `const`. There is no good reason to not have a constant.
Justification for changing the order to first specify "zero" and then
"SHA1": In the future we will support multiple object formats. A
function that produces a zero OID would be parameterized by the object
format then. Imagine `fn zero(format: ObjectFormat)` which would be
called as `Oid::zero(ObjectForma::Sha1)`. In anticipation, we change the
ordering to match.
Multiple commands take an RID as a command line argument. However, the
handling, which usually involves falling back to detection of the
repository associated with the current directory, is duplicated many
times over.
Introduce `fn rid_or_cwd` which can be used by many commands.
Many commands take RIDs as arguments. Most of them call the
corresponding struct member `repo`, some call it `rid`.
For consistency, name these members `repo` for all commands.
This change is intended to be invisible to the user. That is why,
in some cases, the "long" version of the argument must be renamed to
match `--rid`.
The value of `RAD_SOCKET` influences the outcome of `cargo test`.
Users that set this environment variable to, e.g. point `rad` at
a socket at a custom location, were surprised that execution of
tests would interact with their node.
Split `Home::socket` into two functions. `Home::socket_default` is
"pure" and only dependent on the path represented by `Home`. On the
other hand, `Home::socket_from_env` interprets the environment.
Most users will want to use `Home::socket_from_env`.
This makes the `radicle-ssh` crate obsolete.
Signed-off-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
Co-authored-by: Lorenz Leutgeb <lorenz.leutgeb@radicle.xyz>
Each revision now shows a `{base}..{head}` range instead of just the
head. This is meant to clarify when a patch is rebased, and to be
helpful when one might want to observe changes using 'git range-diff'.
Instead of passing the signer as an argument to many methods on `Store`,
scope the `Store` itself to a signer.
This further allows to differentiate two different access modes on the
store in `radicle::cob::store::access`: `WriteAs` (which requires signer)
and `ReadOnly` (which does not require a signer).
The caches for issues and patches in `radicle::cob::{issue,patch}::Cache`
are concretised by removing the first type parameter, since it was
specific to issues and patches anyway. This was done in this commit as
it touches very similar usage sites.
Make `Device` less prominent, and instead lean more heavily towards
traits from the `signature` crate, such as `Keypair` and `Verifier`
in addition to `Signer`. Trait bounds regarding `Signer` could be
simplified, but this is left for the future.
In `radicle-cli`, the function `term::cob::patches_mut`, which generates
errors with a hint is used instead of the lower-level `Profile::patches_mut`.
Commands `rad issue cache` and `rad patch cache` now construct a
writeable cache on top of a read-only store.
Many knock-on changes are handled as well, to arrive at a clean state.
Instead of repairing downgrades, automatic migration could fail.
This occurs when attempting to load signed references, and a downgrade
is detected while coalescing `RepositoryInfo`.
Similarly to how fetch recovers, automatic migration must also recover
by detecting for the downgrade error, and allowing the migration to
happen in this case.
Teach the `rad sync` and `rad clone` commands to accept the
`--signed-refs-feature-level` option. This option configures that
fetch to use the minimum feature level provided when fetching from
other nodes. This overrides the value of
`node.fetch.signedReferences.featureLevel.minimum`, and should only be
used in scenarios where it is necessary to downgrade the security of a
fetch for backwards compatibility.
To achieve this, the `Handle::fetch` method introduces an optional
parameter for threading through the `FeatureLevel`.
In order to allow automatic migration to the feature level 'parent',
introduce a way to force writing signed references, even if the
user-controlled refs are unchanged.
To detect the special case of a Signed References history with a single
and root commit (which would otherwise be detected as feature level
'parent', even though the `refs/rad/sigrefs-parent` ref cannot be
written), keep information about the parent commit in `SignedRefs`.
The output of `rad inspect --sigrefs` is changed to match the more
strict interpretation of the feature level for histories with a single
and root commit.
In order for users to be able to inspect the feature level of Signed
References in a repository, have `rad inspect --sigrefs` attempt to
load Signed References, and, if successful, print the feature level.
To be able to reason about backwards compatibility, downgrade attacks,
and future configurable enforcement of minimum required (security)
features, introduce the concept of a "feature level" in Signed
References.
In this implementation feature levels are assumed to be monotonic, i.e.,
that higher feature levels behave like lower ones, and only add
semantics on top.
Implementing this as an `enum` that is `Ord` flows nicely.
Treatment of the write-side is left for the next commit. Currently,
the write side "promises" `FeatureLevel::Parent`, but is not able
to "keep the promise", since it does not actually inspect the
feature level of the head in case it is unchanged.
CHANGELOG
In issue
29c6c6fc8171287faa0079798ba2d6e3e7fd86f3
was noted that it would be nice to use value parsers for the timeouts in
the CLI.
This patch implements this.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Co-Authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
This patch adds a blank line to seperate the issue reply header from the
issue reply payload.
This makes visually parsing the output easier.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
To prepare for future changes, warn users if their config file currently
does not explicitly specify a default seeding policy.
Because there are now potentially multiple warnings generated that all
relate to the configuration file, group these together and adjust the
wording to be more uniform.
The previous implementation used 'all' as the default for scope, this
could lead to surprising behaviour where a user would fetch all
references for cloned and seeded repositories. Instead have a progressive,
safe by default value - where it fetches only 'followed' references. Later
a user can decide to set the scope to 'all'. NOTE: the default policy
scope was not changed from 'all' and is intended to be changed at a
later date.
Previous implementation used the default scope when a scope wasn't
present. Scope is not present when the policy is block, because block
doesn't have a scope. Instead use an empty string when printing the
block policy.
Command line parsing differs on Windows vs. POSIX compliant operating
systems (just consider the differences in handling `\` for paths vs. as
a marker for escape sequences). Thus, on Windows use `winsplit` to
split command arguments instead of `shlex` for Unix-like OSes.
`winsplit` is a small crate with no other dependencies.
The `From<String> for Message` implementation has an interesting
interaction between `clap` and how `Message` can be used from the
command line.
Note that `FromStr` is not implemented for `Message` – which usually
what is to be expected for use with `clap`, but in fact, `clap` also
allows `From<String>`.
This would make `Message` be a required option when using `rad issue comment`.
It is not possible to use `default_value_t` because that required an
implementation of `Display`, which in this case we do not want to
implement. Trying to use `default_value = "Message::Edit"` also would
not work – it uses that as the text.
So, the solution is to mark it as optional, and default to
`Message::Edit` when it is not specified.
Lorenz Leutgeb
Daniel Norman
Josh Soref
Lorenz Leutgeb
Fintan Halpenny
Adrian Duke
Wiktor Kwapisiewicz
Richard Levitte
Matthias Beyer
Defelo