For large seeds with many repos, it's expensive to traverse the
inventory everytime the node connects to a new peer, for example.
To improve the situation, we cache the inventory per `Storage` instance,
and add a `refresh` method to refresh the inventory.
This method is called when the node is told to synchronize its
inventory.
The timeout was never being used, so it is being removed for the time
being.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Implement caching for the `Issue` and `Patch` COB. This is achieved by
having the `Transaction::initial` and `Transaction::commit` methods
take a cache which can update the newly created/updated object. The
`Store::remove` method also takes the cache for removing the object
from the cache, as well as the repository.
This meant that the `*Mut` types for the respective COBs are required
to carry a cache alongside the repository store. Identities will not
be cached, and so this is always set to `NoCache` -- which performs no
caching, and always succeeds.
To perform cache reading for issues and patches, the `cache::Issues`
and `cache::Patches` traits are introduced. They capture the minimal
amount of methods that are needed for the `rad issue` and `rad patch`
CLI commands.
The implementor for each of these traits is there respective `Cache`
types, which combines their backing repository store and the SQLite
database. They both provide convenience methods:
- `create` (and `draft` for patches)
- `get_mut`
- `remove`
which can be used instead of their repository store counterparts.
All uses of the repository stores (where needed) are replaced with
`Cache` types.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shows you updates on local repositories.
Included here is a basic implementation of a notification system. A new
database is created and updated after every fetch, with refs that have
changed.
The `rad inbox` command can then list items in the database and delete
them.
Most of these changes should be self-explanatory.
* Atomic fetch was no longer used
* The default policy when initializing should be 'all', as it is with
`rad init`.
Since node announcements are stored and retrieved from disk (due to the
PoW), the timestamp on it is never updated. This means it can be too old
to cache and not sent/received by nodes. Fix this by having a max age.
Instead of creating the DB policies handle when needed, construct the
handle when the `Worker` pool is being constructed.
This replaces the usage of the DB handle with the `Worker`'s field
instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a routing database, and an addresses database,
consolidate that in a single database called `node.db`.
We also simplify database access, by providing a single type for opening
the database, and use traits to access the various functions.
We create a new `seed::Store` that has seed-related methods split out of
the `address::Store`.
Note that tracking is still in its own database currently, as it isn't
ephemeral state. This makes it easy to delete the new `node.db` without
risk of losing any important information.
To avoid renaming all database methods, we create a `Stores` wrapper
that allows us to access routing, addresses, seeds etc. without type
ambiguity.
This is a breaking change and requires `addresses.db` and `routing.db`
to be deleted.
It's possible that a temporary directory can be created on a different
mount, and when moved during a clone, creates an I/O error.
To prevent this, add a method to `Storage` which creates a temporary
directory and `Repository` with the path in the form
`<rid>.lock`.
This `.lock` path name can easily be skipped when listing
repositories. Further tooling can be added for detecting leftover
`.lock` directories if, for some reason, they were not cleaned up by
the `tempfile` crate.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is desirable to keep the Git repositories in Radicle efficient by
ensuring objects are packed and unreachable objects are removed.
Add a process call to `git gc` to achieve this. Two flags are used for
garbage collection: `--auto` and `--prune`. Their details are outlined below:
--auto
With this option, git gc checks whether any housekeeping is
required; if not, it exits without performing any work.
--prune=<date>
Prune loose objects older than date (default is 2 weeks
ago, overridable by the config variable
gc.pruneExpire). --prune=now prunes loose objects
regardless of their age and increases the risk of
corruption if another process is writing to the repository
concurrently; see "NOTES" below. --prune is on by default.
For `--prune` the default used is `1.hours.ago`. This was chosen over
`now` since that may be too aggressive after just fetching new data.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of storing received gossip messages in an in-memory `BTreeMap`,
we persist them to the database (`addresses.db`). There are two reasons
for this:
1. Node restarts do not wipe the state, meaning that it is much less
likely that some gossip message will get lost before reaching all
nodes.
2. This will allow us in the next commit to know how far behind we are
after a restart, to be able to request the correct time range of
gossip messages that we missed while offline.
Note that we now share the addresses.db file between two connections and
stores, which we don't do anywhere else. Having multiple connections to
the same database is fine, but the way we're having to do it is a bit
awkward. In a future patch, we could pull out the database schema from the
`address` module and rename the database to make things clearer.
The git-daemon code is no longer needed since git-upload-pack is used
in its place.
Remove the git-daemon code from the runtime and worker.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
As a starting point, we populate the address book (if empty) with some
bootstrap nodes which are trusted.
To prevent these nodes being connected to during tests (including e2e
tests), we create a new constructor for `Config` that is used in tests.
Note that a `cfg(test)` check is not enough given that e2e tests don't
have that set.
This is a fairly substantial change, which adds a new configuration file
to the user's `$RAD_HOME` that includes node configuration, including
the alias, and also makes node aliases required.
When running `rad auth`, the user is now prompted for an alias, which
defaults to `$USER`.
When running `rad self`, the alias is now shown.
If the user runs radicle without a config file, the defaults are loaded,
and `$USER` is used as the alias.
For the purposes of debugging running nodes, it's useful to know which
threads are doing what. This allows tools like `htop` to reveal which
threads are running.
Previously, we only sent the announcement when there were external
addresses. But it contains other information like the node alias,
therefore we always send it.
Since the proof-of-work can be expensive to compute everytime, we add
the ability to load the local node announcement from the file system.
We also change the proof-of-work parameters so that they are relaxed
when running in debug mode, instead of when running tests.
Finally, we remove the boolean validation of the PoW. Instead, we store
the work per-node, in the database, to be used in the future in case of
DoS attacks or network congestion.
Previously, only one connection to the node control socket could be
handled at a time. This usually worked fine, but if one connection hangs
for whatever reason, no other process can access the node.
To improve the reliability and flexibility of the protocol, we introduce
multiplexing over peer connections. This involves a new `Frame` type
that carries a stream-id and payload.
Three stream types are made available:
1. Control
2. Gossip
3. Git
This change brings the following improvements:
* Removed need to queue fetch requests
* Removed need to queue gossip messages
* Removed need for `Fetch` and `FetchOk` messages
* Service doesn't need to know about inbound fetches
* Removed one round-trip for fetch negotiation
* Removed special `done` git packet
* Removed session logic and state around Git/Fetch protocols
* Removed code around upgrading/downgrading transport
* Worker in responder mode is able to process any number of fetches
* Connections support any number of concurrent fetches
We had to introduce a few extra things however to make it all work:
* A `VarInt` type for variable-length integers, since we want the frames
to be lightweight.
* A custom "tunnel" implementation, since we couldn't use the existing
one anymore.
Overall the change removes more complexity than it adds, while improving
the protocol along the way.
The previous fetching logic had some pitfalls regarding its logic:
* Fetched 'rad' references could end up not being verifiable and leaving
the storage in a corrupt state
* Forced pushes would be prohibited, since they would be rejected by
the client side due to the refspecs being used.
The new approach is to stage a fetch in 2 steps. The first step is to
fetch the relevant `rad/id` and `rad/sigrefs` for verification. For
all remotes that are verified, fetch all references listed in their
respective `rad/sigrefs`, using the `+` marker in the refspec,
allowing to update for any force pushes -- note that this becomes a
safe operation since the `sigrefs` are signed by the remote that
created them.
To prevent unverifiable 'rad' references from polluting storage, all
fetch negotiations are done in a staging repository set up in a
temporary directory. All successful fetches are then transferred,
using the 'file://' protocol, from the temporary directory into the
radicle storage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This avoids race conditions, especially in tests, where we try to
connect to the node right after spawning it, but since the
`Runtime::run` function is often called in a different thread, the
socket is not created in time.
The fetch implementation will potentially fetch the local operator's
remote, which is unnecessary and could result in deleted data.
Fix this by threading the local operator's public key and add an
ignore refspec to the fetch arguments, i.e.
^refs/namespaces/<local>/*
The implementation also strictly fetches all or one namespace. This is
improved upon by introducing a new variant for specifying a set of
namespaces.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The tracking configuration has no way of consulting for a configured
scope.
This change allows the storing of this scope inside the tracking
`Config` -- currently unused.
The default Scope is chosen as Trusted, so that nodes do not
implicitly track any other node. If this behaviour is desired -- for
example, for seed nodes -- then All should be chosen.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When a specific tracking policy isn't found, we allow setting a default.
To preserve existing behavior, the default is `Block`, ie. if a node
isn't tracked explicitly, it is blocked.
However, this change allows for using `Track` as the default, which
is a way to track everything without having to know the entities in
advance.
cloudhead
Alexis Sellier
Fintan Halpenny
xphoniex
Alexis Sellier