To ensure the behaviour of ignoring references that are owned by the
local peer a test case is added.
The case has two peers: alice and bob, where alice creates a new
repository. bob fetches to be up-to-date with alice. alice, in turn,
creates an issue and fetches from bob -- which should be successful.
If the refspec:
^refs/namespaces/<alice>/*
was not in place, her fetch from bob would fail since the signed
references would not be a fast-forward.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Adds a test for fetching from trusted delegates.
Currently marked as failing. When the fetch is initiated from a client
that does not have the repository then it will fetch all namespaces,
instead of the trusted set.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To determine the correct Namespaces to use, the repo Policy and Scope
are consulted.
If the policy is Block then this is a failure state and is reported to
the other end.
Otherwise, if the policy is Track, then the scope is checked. For the
Trusted Scope then the Namespaces should consist of all tracked nodes
and delegates for the given repository. However, the repository might
not exist and so it is necessary for the whole repository to be
fetched.
For the All Scope, all Namespaces are fetched.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch implementation will potentially fetch the local operator's
remote, which is unnecessary and could result in deleted data.
Fix this by threading the local operator's public key and add an
ignore refspec to the fetch arguments, i.e.
^refs/namespaces/<local>/*
The implementation also strictly fetches all or one namespace. This is
improved upon by introducing a new variant for specifying a set of
namespaces.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The method `track_repo` only accepted the RID as the argument for
tracking.
Instead, allow passing Scope as an argument for tracking a
repository.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of returning tuples for `repo_entry` and `node_entry`, return
the `Repo` and `Node` types, respectively.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The tracking configuration has no way of consulting for a configured
scope.
This change allows the storing of this scope inside the tracking
`Config` -- currently unused.
The default Scope is chosen as Trusted, so that nodes do not
implicitly track any other node. If this behaviour is desired -- for
example, for seed nodes -- then All should be chosen.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The DelegatesOnly scope is very limited and causes more confusion than
it solves.
The Trusted scope subsumes DelegatesOnly since it implies delegates
along with any tracked nodes. This feels more natural to use and so
DelegatesOnly is removed -- leaving only Trusted and All.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously the alias field was simply a string which could possibly be
empty. Some checks were made to see if this string was empty.
Instead, make the logic more obvious by making the alias field
optional.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The `routes_to` function can loop infinitely during test.
To prevent this from happening a number of tries variable is added. It
checks that the number of tries does not exceed 30, which gives the
function about 3 seconds to complete -- due to the call to
`thread::sleep` using 100ms.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The MockStorage holds an inventory of repositories and their
identities but when asking for a MockRepository, none of this
information is transferred.
Add `id` and `doc` fields to MockRepository for defining some of its
functionality.
In addition, add a generator for a nonempty MockStorage to use in
tests that will expect the storage to be populated.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
A fetch is a client-server interaction and so there are two sides to
this interaction. These sides are generally referred to as receive --
the client side -- and upload -- the server side.
The `Fetch` type indicated whether it was doing a receive or upload by
using a field `initiated: bool`. However, this can be confusing when
you pair it with the `namespaces: Namespaces` field, since only the
receive side should be sending what refspecs it wants and the upload
side responds with those matching refspecs.
A better way to represent this is using an enum for which direction
the fetch is being considered, where the receive side contains the
Namespaces. To borrow from Noise, the variant names are 'Initiator'
for the client and 'Responder' for the server.
The resulting code then makes decisions based on what variant of the
enum was passed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is possible for a pair of nodes to concurrently ask each other
to fetch some repo. These "crossing" requests are problematic,
because the nodes end up waiting for each other to reply, and
the reply never comes.
With this change, the node pair agrees on proceeding with one of
the fetches, while canceling the other.
Previous to this change, we were attempting to gossip after a successful
fetch, but before the session was switched back to the gossip protocol.
This meant that messages were queued for a short amount of time. With
this change, messages should be sent straight away.
The connect command was unimplemented for both Node and the control
socket.
This wires up the connect functionality in both places.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The routing function for Node was not implemented and there were no
functions for getting any tracking information.
This implements routing, tracked_repos, and tracked_nodes. To
accomplish this it was necessary to add associated types to the
Handler trait so that implementations could differ in the types they
use for returning this data, i.e. the control socket needs to use a
channel while the Node needs to return serializable data.
Currently, the Node uses a `Vec` but it would be more beneficial to
return an Iterator directly to ensure we are not always hitting the
heap.
To allow for the tracking types to be used across radicle-node (the
crate) and in radicle::node (the module), it was necessary to move
the types to the common place, i.e. radicle::node. At the same time,
new structs were added to make it easier to refer to tracked repos vs
tracked nodes.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Before this change, the identity document would be loaded for the
COB signer. This meant that a fork would be needed for that signer.
After this change, it's no longer necessary, since the identity doc
head is computed from available remotes.
While making those changes, it was also apparent that some of the
identity-related functions had bad names and error types, this
was fixed as well.
Previously, the seeds information would only consist of the connected
NodeIds.
Improve on this by adding any disconnected and fetching seeds as
well. A seed can either be disconnected, connected, or fetching --
where fetching implies connected.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The Handle trait defines a FetchResult associated type. This type is
always instantiated to be the FetchResult enum in radicle::node.
Remove the associated type to simplify the trait.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If a path was passed to `Home` in non-canonical form it would not use
the right path for any initialisation or use.
The aim is to use the `canonicalize` function for paths. However, this
may return an error if none of the paths exist. To ensure that the
path exists the `new` constructor for `Home` creates the directory and
canonicalizes the path.
Since `new` now initialises the home directory, it would be useful if
it also initialised all the necessary subdirectories -- which removes
the need for the `init` method.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Fintan Halpenny
Alexis Sellier
Dr Maxim Orlovsky
Slack Coder