The intent to drop outgoing connections is modeled as `Option::None`
which is brittle and easy to miss.
Extend `enum AddressConfig` with a variant that is more explicit.
A timeout of PT3S was empirically found to be too short to allow for the
verification of Signed References, given that this verification is now
potentially much more costly compared to earlier versions.
PT30S should allow fetching reasonably sized histories, even if they
are on feature level "root".
Note that this is not a timeout for the overall fetch process, but
only for inactivity on the channel during an ongoing fetch.
When upgrading Signed References via `fn upgrad_sigrefs`, the value of
`RepositoryInfo::synced_at` was not updated. Thus, the caller could not
continue with migrated repositories as usual.
Now that enough information about Signed References is propagated, such
as the head of Signed References after upgrade, is available, it is
possible to construct `SyncedAt`.
Instead of repairing downgrades, automatic migration could fail.
This occurs when attempting to load signed references, and a downgrade
is detected while coalescing `RepositoryInfo`.
Similarly to how fetch recovers, automatic migration must also recover
by detecting for the downgrade error, and allowing the migration to
happen in this case.
Teach the `rad sync` and `rad clone` commands to accept the
`--signed-refs-feature-level` option. This option configures that
fetch to use the minimum feature level provided when fetching from
other nodes. This overrides the value of
`node.fetch.signedReferences.featureLevel.minimum`, and should only be
used in scenarios where it is necessary to downgrade the security of a
fetch for backwards compatibility.
To achieve this, the `Handle::fetch` method introduces an optional
parameter for threading through the `FeatureLevel`.
The configuration of the fetch process was only achieved at the setup
of the of the node.
This limits the ability to pass configuration options to the fetch
worker while the node service is running.
This change introduces `radicle_protocol::fetcher::state::FetchConfig`
to allow configuration options to be kept track of. This includes the
previous `timeout` option, but now also includes the
`radicle_fetch::Config`.
The service now produces the `FetchConfig` and passes it through to
the fetch worker.
In order to allow automatic migration to the feature level 'parent',
introduce a way to force writing signed references, even if the
user-controlled refs are unchanged.
To detect the special case of a Signed References history with a single
and root commit (which would otherwise be detected as feature level
'parent', even though the `refs/rad/sigrefs-parent` ref cannot be
written), keep information about the parent commit in `SignedRefs`.
The output of `rad inspect --sigrefs` is changed to match the more
strict interpretation of the feature level for histories with a single
and root commit.
To be able to reason about backwards compatibility, downgrade attacks,
and future configurable enforcement of minimum required (security)
features, introduce the concept of a "feature level" in Signed
References.
In this implementation feature levels are assumed to be monotonic, i.e.,
that higher feature levels behave like lower ones, and only add
semantics on top.
Implementing this as an `enum` that is `Ord` flows nicely.
Treatment of the write-side is left for the next commit. Currently,
the write side "promises" `FeatureLevel::Parent`, but is not able
to "keep the promise", since it does not actually inspect the
feature level of the head in case it is unchanged.
CHANGELOG
The service learns to consult the policies database to check if a
`NodeId` is blocked.
When a node is blocked the service will prevent any inbound or
outbound connection.
In the case of an inbound connection, a disconnect must be submitted
to the reactor.
In the case of an outbound connection, nodes are filtered out from any
connection lists, and prevented from submitting a connect to the
reactor.
Introduces the ability to explicitly block a peer via the node control
socket. Previously, the node only exposed follow and unfollow commands.
While the underlying policy database schema supported a Block variant,
there was no mechanism to trigger this state via the client handle.
The new block command:
1. Updates the node's follow policy to Block.
2. Immediately disconnects the peer if a session is active.
As part of the work to change the default scope, one of the tests
surfaced an issue where the topology was Alice <--> Bob <--> Eve,
however because of the previous 'all' scope Alice could receive Eve
references via Bob, but since the scope was changed to 'follow' Alice
would need to have a direct connection to Eve. TODO left here for future
consideration.
The `Responder` is a oneshot channel where it sends one result and the
other side receives that result.
This surfaced that the `AnnounceRefs` command was returning one result
at a time. At the moment, this is only used for a single namespace,
the local user's.
Refactors every command that uses a `Sender` to use a `Responder`
instead. There is an exception for `QueryState` since its usage
differs slightly to the other cases.
To make the usage more ergonomic, constructors for the variants that
require a `Responder` are added.
Using empty `Vec`s to mean "all refs" can be confusing. Avoid the chance
of confusion by introduction of a new type that clearly describes which
refs should be fetched.
Wire up the new `FetcherService`. This reduces the `Service` fetch
methods down to:
- `fetch`
- `fetched`
- `dequeue_fetches`
- `fetch_refs_at`
This simplifies the code by off-loading the logic to the `fetcher`
family of types, rather than handling the intricacies in the `Service`
itself.
The `Service` now just performs the necessary I/O based on the
returned events from the `fetcher`.
This also removes the fetching state from the node sessions. This
follows the single responsibility, and sessions now only care about
their connectivity.
Breaking changes:
- The `Connected` state of a peer no longer contains fetching
information, which was being returned as part of the JSON payload
result.
- The `rad debug` information for ongoing fetches contained the number
listeners awaiting for results, this was removed.
Be more defensive by preventing a node, that is not configured for
Tor, to not connect to `.onion` addresses via the `Service::connect`
method.
This means that an `Outbox::connect` should not be produced, and the
address table should not insert an entry.
When maintaining persistent connections, the config was consulted for
a peer address. Multiple addresses for a single `NodeId` can be
listed. This can result in a different address being used for
reconnecting if the `HashSet` returns in a different order.
The original address that was used for connection is in the `Session`,
so this should be used instead.
Evaluate the `error!` logging in `radicle-protocol`.
The majority of cases, the `error!` is downgraded to `warn!`. These
cases are generally useful to know if there's an issue, but the
operator cannon necessarily do anything about it.
In a few cases, `debug!` was chosen. These are generally when an error
means that a result is not part of an accumulation, or the system will
eventually correct itself during another event or restart.
If the previous message started with "Error", then the wording is
changed to say "Failed to".
Evaluate the `warn!` logging in `radicle-protocol`.
If the event is a result of something being suspicious in the running
of the protocol, then it remains a `warn!`.
However, if the system ends up ignoring the event and can continue
without issues, the log level is reduced to `debug!`.
There is an unfortunate lack of single-responsibility with handling the
addresses to connect to.
This is a band-aid fix until the point in time where this can better improved.
Make `git2` an *optional* dependency of `radicle-cob`, and refactor
`radicle` to depend on crates that in turn do not depend on `git2`
*non-optionally*
The main offending dependency of `radicle-cob` is `radicle-git-ext`
from the `radicle-git` workspace in repository
(rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) which *non-optionally* depends on
`git2`.
So, to achieve removal of this dependency:
1. The crate is refactored to depend on the new crates
`radicle-git-ref-format` `radicle-git-metadata`, and
`radicle-oid` introduced in the previous commits, instead of
`radicle-git-ext`.
2. Some code from the `radicle-git-ext` crate in the `radicle-git`
workspace in repository (rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) is
copied. See `crates/radicle-cob/src/backend/git/commit.rs`.
This cascades to `radicle` and its dependents.
Firstly, the there is an
`impl Deref<Target=git2::Oid> for radicle_git_ext::Oid`. This made
it very convenient to just deref to obtain the wrapped `git2::Oid`,
so there are many expressions of the shape `*oid` in `radicle` and
its dependents. However `radicle-oid` does not provide
`impl Deref<Target=git2::Oid> for radicle_oid::Oid`, as notably,
`Target` is an associated type, and not a type parameter, so an
implementation of `Deref` would tie the new `Oid` too tightly to a
particular implementation.
Instead, work with `impl From<radicle_oid::Oid> for git2::Oid`
(which can be enabled using the feature flag `radicle-oid/git2`).
This explains the changes from `*oid` to `oid.into()` at every
transition to "`git2` land".
Secondly, `radicle` and its dependents are refactored to also depend
on `radicle-git-ref-format` and (much less prominently)
`radicle-git-metadata` instead of `radicle-git-ext`
This is to avoid pulling in `git2` via these dependencies.
Thirdly, as the re-exports in `crates/radicle/src/git.rs` change,
they are at the same time also cleaned up. Notably, the types from
`radicle-git-ref-format` are re-exported under `fmt` only, not "twice".
While overall this obviously is very much a breaking change, these
changes should mostly amount to changing from `Deref` to `Into`, i.e.,
`*oid` → `oid.into()` and rewriting imports for `radicle::fmt`.
This is indicated by the mostly mechanical nature of the changes to
`crates/radicle-{cli,node,remote-helper}`.
The "seeds" command does only take a repository ID, and
carries the implicit assumption that the namespace with the same public
key as the Node ID of the receiving `radicle-node` process should be
used as reference for determining whether other nodes are in sync,
but no other namespace.
In the spirit of separating user and node identity, relax this, so that
the command also carries the public keys relative to which the sync
status should be computed. This allows to inspect sync status for
arbitrary namespaces via command.
For now, this feature is not exposed to the CLI, but `rad sync status`
always passes the public key of the active profile.
The "announce references" command does only take a repository ID, and
carries the implicit assumption that the namespace with the same public
key as the Node ID of the receiving `radicle-node` process should be
announced, but no other namespace.
In the spirit of separating user and node identity, relax this, so that
the command also carries the public keys for which the announcement
should be made. This allows to announce arbitrary namespaces out of
storage via command.
For now, this feature is not exposed to the CLI, but rather:
- `rad sync` always announce for the public key of the active profile.
- `git-remote-rad` ditto, as it calls the same codepath.
Whenever the node fetches new updates, it checks if canonical references can be
updated. The node has learned how to return these results and emit them as node
events. This is a breaking change since it adds a new variant the `Event` type,
which is not forwards-compatible.
I was greeted by `rad patch redact` with
called `Result::unwrap()` on an `Err` value:
Error { code: None, message: Some("failed to convert") }
stack backtrace:
[…]
3: core::result::Result<T,E>::unwrap
at …/rust-1.88.0/lib/rustlib/src/rust/library/core/src/result.rs:1137:23
4: sqlite::cursor::Row::read
at …/index.crates.io-1949cf8c6b5b557f/sqlite-0.32.0/src/cursor.rs:136:9
5: radicle::cob::patch::cache::query::find_by_revision
at ./crates/radicle/src/cob/patch/cache.rs:624:65
6: <… as radicle::cob::patch::cache::Patches>::find_by_revision
at ./crates/radicle/src/cob/patch/cache.rs:553:9
7: radicle_cli::commands::rad_patch::redact::run
at ./crates/radicle-cli/src/commands/patch/redact.rs:23:9
8: radicle_cli::commands::rad_patch::run
at ./crates/radicle-cli/src/commands/patch.rs:1026:13
[…]
It turns out that `sqlite::cursor::Row::read` is the panicky version of
`sqlite::cursor::Row::try_read` (which returns a `Result`).
While it is somewhat rare that SQLite reads fail, it is not unheard of.
In `radicle-cli` it might not be critical, but also `radicle-protocol`
and `radicle-fetch` are affected, and they could potentially panic a
`radicle-node` process.
Use `try_read` instead, and propagate down the error handling.
The logic for computing canonical references conflated the semantics of
annotated and lighweight tags, yielding confusing/wrong results. The
main culprit was the call to `peel_to_commit` in
`impl ReadRepository for Repository`, peeling tag objects away.
To resolve this, we separate out quroum computation per object type: one
implementation for commits, and one for tags.
Also move move canonical error types and methods into their own
module to have a cleaner file structure for the main logic.
Capture the `BTreeMap<Oid, u8>` type into a `Votes` struct, with its own API.
We were getting the objects from the repository twice – once in `Canonical::new`
and once again in `ensure_commit_or_tag` – so the latter was removed.
Use an `enum CanonicalObject` to specify which object types the canonical
process supports.
During `converges`, separate commits and tags, and ensure that we are only
looking at objects of one type. Note, that Fintan think this is actually the
*wrong* place to do it because we already filter the objects – so we should
keep track of that information higher up the callstack.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Mostly changes of `use`s and moving components to `radicle-protocol`,
with the goal of just getting `radicle-node` to work on top of the new
`radicle-protocol` crate.
Josh Soref
Lorenz Leutgeb
Fintan Halpenny
Adrian Duke
Defelo
Yaroslav Halchenko
Lorenz Leutgeb
Sebastian Martinez
