The command now works with both a replica target *and* a seeds target.
This is especially useful to eg. ensure that a preferred seed has been
synced, while still trying to hit a higher replica count.
In the case where we don't find any seeds, display a better error
message.
We also don't bail out on error, since the announcement step might still
be worth trying.
Previously, COB change commits would not distinguish between their
parents. This means that they would try to load source code commits
(eg. for patch COBs) and then fail since those commits wouldn't have a
manifest or `Rad-Resource`.
We introduce a backwards compatible change here which is that parent
oids that are not COB commits are accompanied by a commit trailer called
`Rad-Related`. This is for all related content that should be pulled in
but is not part of the change graph proper.
When building the change graph, we simply ignore commits that are marked
as "related".
We were using the two pretty interchangeably. "Project" should only be
used to refer to the repository payload. "Repository" should be used
when referring to the resource that is fetched, synced, cloned, checked
out etc.
If the expected replica count had exceeded the amount of seeds already
synced with the following message would appear:
Not connected to any seeds for {rid}.
This is not true, since there are seeds that were already synced.
This is fixed by calculating the `synced` and `connected` nodes,
without the local peer in the set. This means that the check for
`synced.len() >= connected.len()` will get a hit and the function will
correctly return early.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To allow `rad sync` to break early from the call to `announce`,
control flow is introduced for the callback.
In `rad sync`, the number of synced nodes is checked against the
`replicas` -- if specified -- and sends a `Break`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, the head of the opened patch would not be displayed, and
so the user could not tell what it was if any updates were applied.
Show the head for the opened revision. The below shows the difference
between before and after, respectively:
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) (8b0ea80) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When an alias cannot be found for an `Author` the DID can be repeated eg.
✓ accepted by z6MkkfM…jXVsVz5 z6MkkfM…jXVsVz5
To prevent this we output one of four cases:
* `(<alias>, (you))` -- the `Author` is the local peer and has an alias
* `(<did>, (you))` -- the `Author` is the local peer and has no alias
* `(<alias>, <did>)` -- the `Author` is another peer and has an alias
* `(<blank>, <did>)` -- the `Author` is another peer and has no alias
Notably, we output a blank `Label` when no alias was found.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow `rad patch edit` to take a `--revision` option which will edit
the description of the specified revision, rather than the root
revision.
If the flag is not specified, then the original behaviour of editing
the root revision's title and description is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a timeline of a patch be global and sorted by
timestamp, organise it via revisions. Each revision has an entry in
the timeline, sorted by timestamp. Under each revision, a series of
updates are inlined, also sorted by their timestamps. Currently, these
updates can either be reviews or merges.
For example:
```
├────────────────────────────────────────────────────────────────────────────┤
│ ● opened by fintohaps (you) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ ↑ updated to 5f2a123e3f2aa60f2e03815df283563495b73085 (a1c3c0f) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ └── ✓ merged by cloudhead (z6Mkt67…v4N1tRk) now │
╰────────────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's useful to be able to print out the Rust data of a Radicle defined
COB for debugging purposes, since the current CLI commands will only
show a subset of the data.
Add `--debug` flags to `rad patch show` and `rad issue show` that
print the data to stdout.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Prevent `rad patch update` to create an identical revision to any
other revision in the patch, rather than just the latest revision.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
By default, this command now:
* Follows the peer if not already followed
* Syncs refs of the peer, if it wasn't followed before
* Fetches refs into working copy
This functionality can be disabled via `--no-sync` and `--no-fetch`.
Add functionality for lising the remotes that are in the storage
repository, but a working copy remote has not yet been created for
them.
This functionality is included in the `rad remote` command since it
can be directly used for creating Git remotes using the same command,
i.e. `rad remote add`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
seeding` behaviour under `rad seed`. When an `<rid>` isn't
provided then the seeded repositories are listed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
following` behaviour under `rad follow`. When an `<nid>` isn't
provided then the followed nodes are listed.
This includes filtering by alias, when `--alias` is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shell out to `git`, avoiding using `git2`. This is to avoid an
issue where somewhere within the fetch there is an attempt to lookup a
`rad/sigrefs` object, which says that the object is missing. It is
suspected that this is due to the object being localised in the same
packfile as other objects we are fetching. Since the `rad/sigrefs`
object is never needed nor used in the working copy, this will always
result in the object missing. This seems to only be an issue with
`libgit2`/`git2` and not `git` itself.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
`Infallible` is a more appropriate type in comparsion to `()` for
comments that do not require a `CodeLocation`.
That is because if the type for `location` is `Option<()>`, this means
that `Some(())` can be constructed, however, we never intend to
construct that variant. On the other hand, `Infallible` can never be
constructed, and so, only `None` can be used.
This requires updates to some functions to use the generic `T` and
also handle the different kinds of `Comment`s -- `Infallible` and
`CodeLocation`.
X-Co-Authored-By: Fintan Halpenny <fintan.halpenny@gmail.com>
Allow the CLI user to update a patch's base commit through the `rad
patch update` command.
There was check to see if the head of the branch was the same as the
head of the revision, which would result in the update being skipped.
This was adapted to check that the head *and* the base were the same.
A test was added in the examples to showcase this use.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When we perform updates to cobs we tend to want to sync those changes
to the network after. This patch automatically does this for
operations that perform updates to issues and patches.
Note that `--announce` becomes the default for the `rad patch`
command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
Previously we panicked if a revision wasn't found after an update. But
it can happen that the update goes through yet a concurrent update
prevents the revision from being valid.
To partially deal with this, we don't try to lookup the revision after
an update, we simply return the ID. This means a subsequent lookup can
fail, and the error can be handled there.
Split the commands and change the naming.
* Tracking a repo is now called "seeding"
* Tracking a peer is now called "following"
In this commit, we don't change most of the internal code, only the
user-facing part.
It is more natural for the review command to exist as a subcommand of
patch, since the reviews are for patches.
Remove the `rad review` command, moving its functionality to the `rad
patch` command. The rad-patch.md and rad-review-by-hunk.md tests are
modified to use the `rad patch review` command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Use the derive and `#[default]` mechanism for deriving the default of
`Message`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Rename the --remove options to --delete for assign and label, to be
more consistent with review, and let this be the standard.
Clean up any typos around labels/dids and issues/patches.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Make the CLI easier by unifying the label and unlabel, using `--add`
and `--remove` options instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the assign and unassign commands to exist as
subcommands of the object they are assigning to, i.e. issues and
patches.
Remove the rad assign and rad unassign commands, moving their
functionality to the rad issue and rad patch commands. The
rad-issue.md and rad-patch.md tests are modified to include a assign
test.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Align the naming with the field itself and Patch::assignees.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the label and unlabel commands to exist as
subcommands of the object they are labelling, i.e. issues and
patches.
Remove the `rad label` and `rad unlabel` commands, moving their
functionality to the `rad issue` and `rad patch` commands. The
`rad-issue.md` and `rad-patch.md` tests are modified to include a
label test.
The `rad patch show` command did not support showing labels as part of
its output. This was also included to confirm the test above was working.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a routing database, and an addresses database,
consolidate that in a single database called `node.db`.
We also simplify database access, by providing a single type for opening
the database, and use traits to access the various functions.
We create a new `seed::Store` that has seed-related methods split out of
the `address::Store`.
Note that tracking is still in its own database currently, as it isn't
ephemeral state. This makes it easy to delete the new `node.db` without
risk of losing any important information.
To avoid renaming all database methods, we create a `Stores` wrapper
that allows us to access routing, addresses, seeds etc. without type
ambiguity.
This is a breaking change and requires `addresses.db` and `routing.db`
to be deleted.
My use case for this is to have a script that lists my outstanding
patches so I can ping people for review or merge if there's no
movement for a long time.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
Allow the caller of `rad sync` to `--sort-by` the NID, alias, or
status of the seeds.
This prevents random ordering, due to timestamps, in CLI testing.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's necessary for a delegate's references to be present, e.g.
verification, calculating of canonical data, etc.
To ensure that a user does not get themselves into a state where they
have added a delegate without their references, prevent adding a
delegate to the identity document if their `rad/sigrefs` is not
present.
As well as this, it ensures that if there is a `rad/sigrefs` that it
has the default branch -- since it's possible for a peer to have created
`rad/sigrefs` through COBs without a default branch.
This change meant that the `rad-id` tests required the test scenarios
to be set up with all nodes having each other's references. A test
case to add a missing delegate was also added to `rad-id.md`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the local peer does not have any `rad/sigrefs` then there is no
risk of any data corruption. In this case the repository can be
removed entirely.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Removing a repository completely can result in data corruption for
users, since a user's `rad/sigrefs` are the ground truth of their
state, and any fork of them results in errors in the protocol.
Instead of `rad rm`, we replace it with `rad clean` that removes all
remotes other than the local peer's namespace and the delegates'. The
delegates are also necessary to keep, since the repository's identity
is dependent on them.
Note that the remotes that were cleaned will be populated again upon
fetching, as long as they are tracked.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Distinguish between repos that are simply tracked, vs. repos that are
cloned (and thus forked). By default, we don't show repos that don't
have a local fork.
Add the `--revision` option for `rad patch checkout`. This allows the
user to specify a particular revision of the patch to checkout. If the
revision is not specified it will use the latest revision of the patch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add the `--name` option to `rad patch checkout`. This allows the user
to name the branch they are checking out, rather than use the
`patch/<short-id>` format.
This change includes returning early for setting the upstream branch,
if the upstream already existed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add a `--force` flag to forcibly checkout the branch to the latest
revision, if the branch already exists.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Currently, if refs are updated while the node is stopped, these refs are
not immediately announced when the node starts, due to the node being
unaware of the updates.
To remedy this, on startup, we compare the refs we have in storage with
the refs we announced to the network. Since only our own refs could have
changed while the node was stopped, this change only applies to owned
refs. If we detect that storage has changed while the node was stopped,
we create ref announcements for the updated repos and store them in our
gossip database. These announcements will be included with other
historical gossip announcements when nodes connect to us.
To keep track of what was announced, we store our local node's sync
status in the database. This is also useful when using the `rad sync status`
command, as it tells us what oid our local node is at, and whether it
is aware of our local changes yet.
In addition to this, we make a small fix: previously, inventory and ref
announcements originating from our local node were not stored in the
announcement database. We ensure that they are via the new `announce`
method.
This command shows the sync status of a repository by consulting the
database via the node.
To make it work, we call into the address store to update the
`repo-sync-status` table when receiving ref announcements that are
relevant to us.
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of calling `std::fs::remove_dir_all` in the `rad rm` command,
use the `WriteStorage::remove` method.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
cloudhead
Sebastian Martinez
Fintan Halpenny
Fintan Halpenny
Lars Wirzenius
Thomas Scholtes