This command announces refs to peers and waits for them to be
in sync.
Adds a subscribe method to `Handle` so that we can get the events
from the seed to allow us to confirm that the configured seeds fetched
from us.
By having the keep-alive delta be the same as the ping timeout,
we essentially disconnected peers right after we sent them our
first ping.
This fixes that issue by setting the ping timeout to double the
keep-alive delta.
Instead of returning the namespaces that we fetched with,
we return the remotes that were actually fetched from.
This can differ if some trusted peers were not available
on the remote node.
Previously, if that was the case, it would cause errors
since the remotes were looked up and that lookup failed.
Previously we were announcing inventories all the time, due to
relying on the timestamp changing on insertion.
We change this to only announce our inventory when it actually changes.
To improve the reliability and flexibility of the protocol, we introduce
multiplexing over peer connections. This involves a new `Frame` type
that carries a stream-id and payload.
Three stream types are made available:
1. Control
2. Gossip
3. Git
This change brings the following improvements:
* Removed need to queue fetch requests
* Removed need to queue gossip messages
* Removed need for `Fetch` and `FetchOk` messages
* Service doesn't need to know about inbound fetches
* Removed one round-trip for fetch negotiation
* Removed special `done` git packet
* Removed session logic and state around Git/Fetch protocols
* Removed code around upgrading/downgrading transport
* Worker in responder mode is able to process any number of fetches
* Connections support any number of concurrent fetches
We had to introduce a few extra things however to make it all work:
* A `VarInt` type for variable-length integers, since we want the frames
to be lightweight.
* A custom "tunnel" implementation, since we couldn't use the existing
one anymore.
Overall the change removes more complexity than it adds, while improving
the protocol along the way.
This fixes an issue that came up in tests where we would be reading
and writing to the database at the same time, and it would fail with
an error due to the lock being contended on.
The One variant caused many paint points for fetching logic, where it
was not necessary. It was only constructed in one place, which could
be replaced by using the variant that holds a set of keys.
Remove the Namespaces::One variant and rename Namespaces::Many to
Namespaces::Trusted.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When a repository does not yet exist during a fetch, i.e. a clone,
then only delegates are being fetched.
Augment Namespaces::Many to hold the trusted and optional delegate peers
separately. Doing so allows the construction of the variant without
the repository existing, but tracking relationships existing.
This variant can then be used to build refspecs for both the trusted
peers and delegates when doing a cloning fetch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The tracked nodes include nodes marked tracked in the db, and
the delegates and `Namespaces::All` if it is a new repo.
Signed-off-by: Han Xu <keepsimple@gmail.com>
First, we make sure to always attempt reconnection to persistent peers,
no matter the reason.
Second, we don't re-attempt connections when an inbound peer
disconnects. This minimizes the chance of connections crossing.
Third, we clean up `session::Error`, and don't use it to signal a
missing session, since it doesn't really belong there.
1. We were announcing inventory every 30 seconds. This is now changed
to 1 hour.
2. We were using a variable to track whether our inventory has been
announced to the network, but this var was set based on what we
tracked, not the inventory we had. This var has been removed.
This change ensures that on `Subscribe`, we only relay the latest
announcement of each node, per announcement category.
Previously, we would relay all announcement, while only the last one
was relevant.
It's not a good idea to have fallible operations run after `FetchOk`
is received, since there's no easy way to communicate the error
to the remote at that point. What would then happen is that the fetch
just "hangs", since nothing is there to cancel it.
Hence, we compute namespaces earlier in the process, and store the
namespaces in the session. If there is a failure, the fetch is
never initiated.
It was possible to trigger multiple connection attempts to the same
peer, since we didn't track connection attempts that hadn't yet
returned to the service via `Service::attempted`.
With this change, we add an extra `Initial` state to sessions, so
that redundant connections are not attempted when one is already under
way.
Periodically, make sure we try to fetch inventory that is tracked
but missing from local storage.
We decide not to fetch immediately on `TrackRepo`, as this limits
the command's flexibility. For example, when `rad clone` is used,
we want to be able to fetch manually after tracking.
It's possible for a peer to disconnect before responding with `FetchOk`.
In that case, we make sure to return to any pending fetch request with
an error.
To determine the correct Namespaces to use, the repo Policy and Scope
are consulted.
If the policy is Block then this is a failure state and is reported to
the other end.
Otherwise, if the policy is Track, then the scope is checked. For the
Trusted Scope then the Namespaces should consist of all tracked nodes
and delegates for the given repository. However, the repository might
not exist and so it is necessary for the whole repository to be
fetched.
For the All Scope, all Namespaces are fetched.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch implementation will potentially fetch the local operator's
remote, which is unnecessary and could result in deleted data.
Fix this by threading the local operator's public key and add an
ignore refspec to the fetch arguments, i.e.
^refs/namespaces/<local>/*
The implementation also strictly fetches all or one namespace. This is
improved upon by introducing a new variant for specifying a set of
namespaces.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The method `track_repo` only accepted the RID as the argument for
tracking.
Instead, allow passing Scope as an argument for tracking a
repository.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
A fetch is a client-server interaction and so there are two sides to
this interaction. These sides are generally referred to as receive --
the client side -- and upload -- the server side.
The `Fetch` type indicated whether it was doing a receive or upload by
using a field `initiated: bool`. However, this can be confusing when
you pair it with the `namespaces: Namespaces` field, since only the
receive side should be sending what refspecs it wants and the upload
side responds with those matching refspecs.
A better way to represent this is using an enum for which direction
the fetch is being considered, where the receive side contains the
Namespaces. To borrow from Noise, the variant names are 'Initiator'
for the client and 'Responder' for the server.
The resulting code then makes decisions based on what variant of the
enum was passed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is possible for a pair of nodes to concurrently ask each other
to fetch some repo. These "crossing" requests are problematic,
because the nodes end up waiting for each other to reply, and
the reply never comes.
With this change, the node pair agrees on proceeding with one of
the fetches, while canceling the other.
Previous to this change, we were attempting to gossip after a successful
fetch, but before the session was switched back to the gossip protocol.
This meant that messages were queued for a short amount of time. With
this change, messages should be sent straight away.
The routing function for Node was not implemented and there were no
functions for getting any tracking information.
This implements routing, tracked_repos, and tracked_nodes. To
accomplish this it was necessary to add associated types to the
Handler trait so that implementations could differ in the types they
use for returning this data, i.e. the control socket needs to use a
channel while the Node needs to return serializable data.
Currently, the Node uses a `Vec` but it would be more beneficial to
return an Iterator directly to ensure we are not always hitting the
heap.
To allow for the tracking types to be used across radicle-node (the
crate) and in radicle::node (the module), it was necessary to move
the types to the common place, i.e. radicle::node. At the same time,
new structs were added to make it easier to refer to tracked repos vs
tracked nodes.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Before this change, the identity document would be loaded for the
COB signer. This meant that a fork would be needed for that signer.
After this change, it's no longer necessary, since the identity doc
head is computed from available remotes.
While making those changes, it was also apparent that some of the
identity-related functions had bad names and error types, this
was fixed as well.
Previously, the seeds information would only consist of the connected
NodeIds.
Improve on this by adding any disconnected and fetching seeds as
well. A seed can either be disconnected, connected, or fetching --
where fetching implies connected.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When a specific tracking policy isn't found, we allow setting a default.
To preserve existing behavior, the default is `Block`, ie. if a node
isn't tracked explicitly, it is blocked.
However, this change allows for using `Track` as the default, which
is a way to track everything without having to know the entities in
advance.
* Read git request line before starting daemon, so that we don't leave
git data in the socket read buffer in case of an error connecting to
the daemon.
* Send a response on the fetch channel even if we disconnect the remote.
* Don't send `done` packet if there's an error; it won't be expected.
We weren't updating the sessions map when a persistent peer
was re-attempted. It would then panic when `connected` was called,
because the state would be `Disconnected`.
Rust 1.67 was announced[0]. Update the necessary files for running
1.67 and fix the clippy suggestions for string interpolation.
[0]: https://blog.rust-lang.org/2023/01/26/Rust-1.67.0.html
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This change makes sure that nodes don't gossip announcements back to
the announcers.
Since the tests were relying on this mechanism to populate the routing
table, we had to change a few more things, such as adding the inventory
to the node's routing table.
Signed-off-by: Alexis Sellier <self@cloudhead.io>
Instead of only being interested in messages from "now", we request
messages from one hour in the past up to now. This lets nodes catch
up on state more quickly, without having to wait for new announcements.
Signed-off-by: Alexis Sellier <self@cloudhead.io>
We shouldn't be marking attempted peers as "connected". We should wait
for the connection to be properly established.
Signed-off-by: Alexis Sellier <alexis@radicle.xyz>
There are few unrelated changes in this commit that I wasn't able to
split out, mostly due to laziness, so I'll list them here:
* The node startup logic is moved out of the main function, and into a
dedicated functionin `client.rs`.
* There is a tentative worker implementation that is untested, and
handles git replication both ways. It's likely lacking in various ways
but I wanted to get it in there anyway.
* `Address` was moved from `radicle-node` to `radicle`, because it's
needed to send `Connect` commands from the node handle.
* The `netservices` dependency was updated.
* Finally, there is a first end-to-end node test, which currently
doesn't use NoiseXK, but uses the new reactor in `netservices`.
Signed-off-by: Alexis Sellier <self@cloudhead.io>
This is a large change that introduces transport encryption via
a Noise_XK handshake. The inner `Service` now works directly
with `NodeId` and doesn't need to interact with socket addresses.
The transport logic takes place in `wire::transport`, and the
established sessions are passed down to `Service`.
Note that the i/o implementation in the `poll-reactor` crate still
needs testing, and there is still work to be done to integrate the
Git transport as part of this architecture.
Signed-off-by: Alexis Sellier <alexis@radicle.xyz>
Use the BoundedVec to limit the supported number of refs in
RefAnnouncement messages. The size (235) is the maximum supported by
message wire size.
To reduce the complexity of the changes, BoundedVec is used again
instead of using a new bounded Refs or BTreeMap. This requires
defining new Decode/Encode logic for Ref's element types, and
workarounds for arbitrary instances.
Signed-off-by: Slack Coder <slackcoder@server.ky>
The tracking command was tracking a project when it should
have been tracking peers.
We also add the ability to pass an alias when tracking from
the CLI.
Signed-off-by: Alexis Sellier <alexis@radicle.xyz>
Alexis Sellier
Fintan Halpenny
Alexis Sellier
Han Xu
xphoniex
Dr Maxim Orlovsky
Dr Maxim Orlovsky
Slack Coder
Dr Maxim Orlovsky