`cargo check` fails because `human-panic` and `sysinfo` require at least
1.88.0.
+++ command cargo check --release --locked --all-targets
error: rustc 1.85.0 is not supported by the following packages:
human-panic@2.0.6 requires rustc 1.88
sysinfo@0.37.2 requires rustc 1.88
Bump MSRV to fix this.
1.88.0 introduced [let chains], which in turn has `clippy` warn about
nested if statements. All of these sites are fixed in this change.
1.87.0 introduced [`is_multiple_of`], which is a more readable version
of `x % y == 0`.
[let chains]: https://blog.rust-lang.org/2025/06/26/Rust-1.88.0/#let-chains
[`is_multiple_of`]: https://doc.rust-lang.org/std/primitive.usize.html#method.is_multiple_of
Multiple commands take an RID as a command line argument. However, the
handling, which usually involves falling back to detection of the
repository associated with the current directory, is duplicated many
times over.
Introduce `fn rid_or_cwd` which can be used by many commands.
Each revision now shows a `{base}..{head}` range instead of just the
head. This is meant to clarify when a patch is rebased, and to be
helpful when one might want to observe changes using 'git range-diff'.
Instead of passing the signer as an argument to many methods on `Store`,
scope the `Store` itself to a signer.
This further allows to differentiate two different access modes on the
store in `radicle::cob::store::access`: `WriteAs` (which requires signer)
and `ReadOnly` (which does not require a signer).
The caches for issues and patches in `radicle::cob::{issue,patch}::Cache`
are concretised by removing the first type parameter, since it was
specific to issues and patches anyway. This was done in this commit as
it touches very similar usage sites.
Make `Device` less prominent, and instead lean more heavily towards
traits from the `signature` crate, such as `Keypair` and `Verifier`
in addition to `Signer`. Trait bounds regarding `Signer` could be
simplified, but this is left for the future.
In `radicle-cli`, the function `term::cob::patches_mut`, which generates
errors with a hint is used instead of the lower-level `Profile::patches_mut`.
Commands `rad issue cache` and `rad patch cache` now construct a
writeable cache on top of a read-only store.
Many knock-on changes are handled as well, to arrive at a clean state.
This patch adds a blank line to seperate the issue reply header from the
issue reply payload.
This makes visually parsing the output easier.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Changes the `Error::WithHint::hint` field to use a `String` type instead of
`&'static str`. This allows the caller to provide extra hint
information.
To make it easier to use an `Error::with_hint` constructor is added.
The other variants of `terminal::args::Error` were no longer used.
The only variant required is `Error::WithHint`.
The enum is also made private, since it is only used in this crate.
These helper functions were for parsing arguments passed via lexopt.
Since `clap` is now the parser for these types, these functions are no longer
needed.
Make `git2` an *optional* dependency of `radicle-cob`, and refactor
`radicle` to depend on crates that in turn do not depend on `git2`
*non-optionally*
The main offending dependency of `radicle-cob` is `radicle-git-ext`
from the `radicle-git` workspace in repository
(rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) which *non-optionally* depends on
`git2`.
So, to achieve removal of this dependency:
1. The crate is refactored to depend on the new crates
`radicle-git-ref-format` `radicle-git-metadata`, and
`radicle-oid` introduced in the previous commits, instead of
`radicle-git-ext`.
2. Some code from the `radicle-git-ext` crate in the `radicle-git`
workspace in repository (rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) is
copied. See `crates/radicle-cob/src/backend/git/commit.rs`.
This cascades to `radicle` and its dependents.
Firstly, the there is an
`impl Deref<Target=git2::Oid> for radicle_git_ext::Oid`. This made
it very convenient to just deref to obtain the wrapped `git2::Oid`,
so there are many expressions of the shape `*oid` in `radicle` and
its dependents. However `radicle-oid` does not provide
`impl Deref<Target=git2::Oid> for radicle_oid::Oid`, as notably,
`Target` is an associated type, and not a type parameter, so an
implementation of `Deref` would tie the new `Oid` too tightly to a
particular implementation.
Instead, work with `impl From<radicle_oid::Oid> for git2::Oid`
(which can be enabled using the feature flag `radicle-oid/git2`).
This explains the changes from `*oid` to `oid.into()` at every
transition to "`git2` land".
Secondly, `radicle` and its dependents are refactored to also depend
on `radicle-git-ref-format` and (much less prominently)
`radicle-git-metadata` instead of `radicle-git-ext`
This is to avoid pulling in `git2` via these dependencies.
Thirdly, as the re-exports in `crates/radicle/src/git.rs` change,
they are at the same time also cleaned up. Notably, the types from
`radicle-git-ref-format` are re-exported under `fmt` only, not "twice".
While overall this obviously is very much a breaking change, these
changes should mostly amount to changing from `Deref` to `Into`, i.e.,
`*oid` → `oid.into()` and rewriting imports for `radicle::fmt`.
This is indicated by the mostly mechanical nature of the changes to
`crates/radicle-{cli,node,remote-helper}`.
A rewrite of the argument parsing portions of the `rad issue` subcommand
using `clap` instead of `lexopt`.
From a user's perspective, the look-and-feel of `rad issue` does not
change much. Although, the most prominent change is to rely on
`clap`'a default error template which looks a bit different from what we
use usually (`error: ...` vs. `✗ Error: ...`).
Leaving the above restriction aside, subcommand mis-usage is
reported more verbosely.
Also configure `clap` to use colored output for errors and help pages.
In help output, headers are colored with `Magenta` to match the overall
CLI styling.
Specify a type that captures the different actions that can be take
when using the `comment` command: `Comment`, `Reply`, and `Edit`.
Move the functions that run the corresponding actions into a `comment`
module.
To preserve the "default command" behaviour being `rad issue list`,
e.g., `rad issue --solved` behaving like `rad issue list --solved`,
introduce a new type `EmptyArgs`to also parse arguments without a
subcommand. In case no subcommand was parsed, construct `Command::List`
with from `EmptyArgs`.
Co-authored-by: Matthias Beyer <mail@beyermatthias.de>
Co-authored-by: Lorenz Leutgeb <lorenz.leutgeb@radicle.xyz>
Co-authored-by: Erik Kundt <erik@zirkular.io>
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
When run with a secret and public key that do not cryptographically
match, `fn radicle_cli::terminal::io::signer` would prompt the user
for a password to unlock the secret key, and then carry on with a
mismatching key pair.
Fix this by verifying that the keys match in `MemorySigner::load`
and only swallow errors initializing the signer in cases where
prompting for a password makes sense. It does not make sense in the
case of mismatched keys.
The output of this command is confusing. It is not clear which of the
hashes printed is that of the revision and which one is the respective
head commit.
Further, the hash is omitted on the initial revision, adding confusion.
Further, the terminology of "revised" vs. "updated" is confusing.
This rewrites `timeline.rs` to drop the distinction between various
revisions (in wording, the small icon is still different) and cleans up
the output.
Attention is paid to alignment of the output. Now all verbs of updates
("accepted", "rejected", "reviewed", "merged") are aligned, and authors
("… by …") are also aligned.
The rewrite itself is not for better code quality or readability.
Note that all the code in this file only accessed via one `fn` by one
callsite in the implementation of `rad patch`.
As a library crate, it is bad to return such generic errors.
To get there, errors from `inquire` are downcasted.
This allowed to clean up the public interface of `radicle-term`, so that
it does also not leak the `inquire::InquireError` in its public API.
This patch adds the `cob::common::Title` struct, this allows instead of
using `std::str::String` or generics and traits for it, to define more
precisely what a title should be.
It trims the provided string and makes sure it contains no carriage
return or new line characters.
Where a `std::str::String` makes more sense so it's easier to mutate it,
we keep the code as is.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Symbols signaling status of a process and similar are duplicated in
three different crates. Also two different symbols to signal success are
used:
1. ✓ ( Check Mark, U+2713)
2. ✔ (Heavy Check Mark, U+2714)
Work against that by referring to `radicle-term` from the other crates.
This is morally a revert of 70fb0d3fef
while additionally getting to compile
`crates/radicle-term/src/editor.rs` on Windows.
To get the changes that were made on top of the revert, check
git diff 70fb0d3fef~1 <this commit> -- crates/radicle-term/src/editor.rs
There were reports of the inquire editor being unrealiable.
`radicle-term` includes quite a lot of rather "low-level" logic to spawn
the preferred editor of the user. In particular, this logic is
platform-dependent and only works on Unix-like platforms.
Also, `radicle-term` already depends on `inquire` which features an
editor prompt. It is a cross-platform solution to spawn the editor.
This commit changes the implementation of `Editor` to be a wrapper of
`inquire::Editor`, keeping the interface mostly intact.
Downsides:
- We cannot edit a file "in place" this way, instead we have to read
it, as `inquire` only supports editing temporary files. This can also
be viewed as a benefit, as we lessen the risk of corruption of these
files.
- `inquire::Editor` contains borrows, so it is quite cumbersome to
extend it with a custom mechanism for looking up the preferred
editor. The lookup logic was kept, but needs to be invoked by the
caller. In the future we might consider just using the logic provided
by `inquire` or requesting a change to `inquire`.
- The prompt is a bit strange. It does not show the current state of
the output, see <https://github.com/mikaelmello/inquire/issues/280>
and <https://github.com/mikaelmello/inquire/pull/271>.
Pay more attention to when a Node ID is displayed in compact form. As
this was sometimes used to save space, e.g. in `rad node status` in
combination with long node addresses (like .onion names), also implement
a compact format for node addresses and use that instead in some cases.
Progress notifications in spinners keep the short form.
Lorenz Leutgeb
Josh Soref
Lorenz Leutgeb
Richard Levitte
Matthias Beyer
Defelo
Adrian Duke
Fintan Halpenny
Lorenz Leutgeb
Erik Kundt
Christopher Fredén
Sebastian Martinez
