Previously, authorization was only checked for ops after the root op.
We also avoid creating empty actions for `assign` and `label`, which
was needed for non-authorized users to be able to create issues/patches.
Previously, COB change commits would not distinguish between their
parents. This means that they would try to load source code commits
(eg. for patch COBs) and then fail since those commits wouldn't have a
manifest or `Rad-Resource`.
We introduce a backwards compatible change here which is that parent
oids that are not COB commits are accompanied by a commit trailer called
`Rad-Related`. This is for all related content that should be pulled in
but is not part of the change graph proper.
When building the change graph, we simply ignore commits that are marked
as "related".
We were using the two pretty interchangeably. "Project" should only be
used to refer to the repository payload. "Repository" should be used
when referring to the resource that is fetched, synced, cloned, checked
out etc.
Previously, the head of the opened patch would not be displayed, and
so the user could not tell what it was if any updates were applied.
Show the head for the opened revision. The below shows the difference
between before and after, respectively:
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) (8b0ea80) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When testing the CLI, "since"-calculations will result in different
values over time:
now
1 month ago
2 months ago
10 months ago
1 year ago
10 years ago
Initially, the solution was to use the wildcard match from `snapbox`,
`[..]`, to match on these values. However, since these values change
in length it means that they will affect the width of the tables
produced by the CLI.
To ensure the width is stable across runs over time it's possible to
use a time that is the same as the commit time used at testing.
To do this the `Timestamp` type is now a newtype which has a
constructor `now` which will use the `RAD_COMMIT_TIME` env variable
for construction, if it's available and in debug mode. This ensure
that all "since"-calculations will result in `now`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Introduces a new COB type to store repository identity documents.
The reason for this change is to:
1. Simplify the code, as the identity document logic resembled a COB,
yet it had custom logic. This allows existing COB code to be used for
identities.
2. Make identity document update logic more flexible, since COB actions
can be added in the future.
3. Re-purpose existing tools around COBs to work on identities, eg. `rad
cob`.
4. Unify the concept of an identity change proposal, with regular identity
changes. This means we can remove the `id.proposal` COB in favor of
using the `id` COB itself.
Notes
-----
* Each repository has one Identity COB.
* The `Proposal` COB has been repurposed into the `Identity` COB.
* Identity documents are stored as *embeds* inside the Identity COB
actions.
* The action that contains new document versions is called `revision`,
just like the Patches COB.
* The namespaced `rad/id` ref is a symbolic reference to that Identity
COB.
* The canonical `rad/id` ref is a direct reference to the commit in the
Identity COB that contains the latest *accepted* revision of the
document.
* All commands for managing identities have been folded into `rad id`.
Hence `rad delegate` and `rad edit` are removed.
* The concept of "rebasing" an identity document is gone.
* The `rad id` output has been updated to match the style of other
commands.
* When a revision has enough signatures, it is automatically adopted as
the current identity, there is no longer the need for a "commit"
action.
* When an identity revision is proposed, and the current identity has a
threshold of `1`, that identity is automatically accepted due to the
above point.
* The idea of "verifying a peer's identity branch" no longer applies, as
COBs cannot be verified one history at a time.
* Since the root commit of the Identity COB does not have a "Resource"
to point to (it would have to point to itself, which is impossible),
we've made the resource id optional for COBs.
This allows a user to choose private or public visibility on `rad init`.
It also improves the output to tell the user what happened due to this
choice.
After cloning, we show a cool little summary with some repo stats.
We had to make some adjustments to the way visual width is calculated
due to a bug surfaced around emoji width calculation. Unfortunately
there isn't a perfect solution that works across terminals yet, so the
"variation selector 16" code-point is filtered out for now.
> I'm going to be making a set of breaking changes to COBs in order to
stabilize the data formats. This is hopefully a one-time change that
bundles various breaking changes.
All COBs have been reworked: issue, patch, id.
The changes included are:
* Revise the assign and tag actions to take a single list of
assignees/tags to set, instead of an "add" and a "remove" list. This
makes API usage simpler when editing issues, and simplifies the apply
function
* Rename "tags" to "labels", and the tag action to label. This is
because tag is confusing in the context of git, as it could mean a git
tag. Using label removes that confusion.
* Use DIDs instead of PublicKeys for assignees -- this is more
future-proof
* Modify the manifest file format in the COB tree. Mainly, remove the
`history_type` key which is redundant, and use camelCase for keys
* Flatten the `Thread` actions into the parent action type
* Ensure that operations on redacted objects do not fail, since
redactions could have happened concurrently
* Use a consistent naming scheme for actions, using `.` as separator
* Consolidate comment types and remove `CodeComment`, by adding an
optional `location` field to `Comment`
* Add many placeholder actions that are not yet implemented
To preserve backwards compatibility, a `legacy` module is created with
the old `apply` function. When loading the manifest, we check whether it
is a legacy COB or a "stable" COB, and in the legacy case, use the
legacy code to materialize the state and then convert the object into
the stable type. Eventually, we'll delete the legacy code.
cloudhead
Fintan Halpenny
Alexis Sellier