When a merge is applied to a patch, we check whether the threshold
of delegates has been reached, at which point we set the patch status
to `merged`.
This requires threading the identity document oid through the "apply"
process.
Revision IDs are globally unique. Users will be able to use the
Revision ID in place of its patch ID.
Make `rad merge` refuse to merge an older revision unless the `--force`
option is given.
Using LWWReg::from will always set the clock value to the default,
which can end up being used wrong.
Instead, introduce a constructor method `initial` to indicate that it
should be used on initial construction, while `new` should be used for
newer values of the register.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This fixes an issue that came up in tests where we would be reading
and writing to the database at the same time, and it would fail with
an error due to the lock being contended on.
Replaces pub accessors to struct fields with methods
Also creates some methods to compute necessary information
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
The One variant caused many paint points for fetching logic, where it
was not necessary. It was only constructed in one place, which could
be replaced by using the variant that holds a set of keys.
Remove the Namespaces::One variant and rename Namespaces::Many to
Namespaces::Trusted.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When a repository does not yet exist during a fetch, i.e. a clone,
then only delegates are being fetched.
Augment Namespaces::Many to hold the trusted and optional delegate peers
separately. Doing so allows the construction of the variant without
the repository existing, but tracking relationships existing.
This variant can then be used to build refspecs for both the trusted
peers and delegates when doing a cloning fetch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The previous fetching logic had some pitfalls regarding its logic:
* Fetched 'rad' references could end up not being verifiable and leaving
the storage in a corrupt state
* Forced pushes would be prohibited, since they would be rejected by
the client side due to the refspecs being used.
The new approach is to stage a fetch in 2 steps. The first step is to
fetch the relevant `rad/id` and `rad/sigrefs` for verification. For
all remotes that are verified, fetch all references listed in their
respective `rad/sigrefs`, using the `+` marker in the refspec,
allowing to update for any force pushes -- note that this becomes a
safe operation since the `sigrefs` are signed by the remote that
created them.
To prevent unverifiable 'rad' references from polluting storage, all
fetch negotiations are done in a staging repository set up in a
temporary directory. All successful fetches are then transferred,
using the 'file://' protocol, from the temporary directory into the
radicle storage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To be able to change the description of a patch revision, without the
need to create a new revision.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
Using LWWReg::from was giving subsequent actions
the same clock value as their predecessors.
This resulted in a Reject not being able
to turn into an Accept on a second review of a patch.
The solution is to use the clock value that was produced for the Op
and pass that into new, avoiding the call to from.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
Introduce a canonical reference for refs/rad/id to aid in discovering
information about a repository without knowing a peer -- e.g. if a
peer wants to clone a new repository it needs to find out which peers
are delegates for that project, but does not know what their NIDs are
up front.
The approach mirrors the canonical `head` for a repository and
introduces useful constructors for `Doc`/`DocAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The tracked nodes include nodes marked tracked in the db, and
the delegates and `Namespaces::All` if it is a new repo.
Signed-off-by: Han Xu <keepsimple@gmail.com>
We implement a new `Element` trait which allows for more complex output
to be drawn, such as vertical and horizontal stacks.
We adapt `Table` to work within this system.
We refresh the output of `rad patch show` to use these new tools.
For display purposes in the web client, we add with this commit the
some needed properties to the revisions in the patch endpoint.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
It's not a good idea to have fallible operations run after `FetchOk`
is received, since there's no easy way to communicate the error
to the remote at that point. What would then happen is that the fetch
just "hangs", since nothing is there to cancel it.
Hence, we compute namespaces earlier in the process, and store the
namespaces in the session. If there is a failure, the fetch is
never initiated.
The Reaction type needs to ensure that the `char` stored for its value
meets certain requirements -- via its `new` constructor.
To ensure Reaction is always constructed correctly, the `pub` accessor
is removed, and the Deserialize implementation is implemented by hand
-- as opposed to using derive.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If Ops::try_from fails in from_history then it means that some
operations failed to be parsed.
If this happens, then a warning should be logged so that these failure
cases can be more easily traced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Periodically, make sure we try to fetch inventory that is tracked
but missing from local storage.
We decide not to fetch immediately on `TrackRepo`, as this limits
the command's flexibility. For example, when `rad clone` is used,
we want to be able to fetch manually after tracking.
By introducing a small limitation: only allowing entries in the change
graph to be addressable, instead of individual operations; we
drastically simplify the CRDT implementation.
There are four advantages:
1. Op ids are just regular SHA-1s
2. There's no need for relative IDs, ops never refer to other ops within the
same commit
3. There's no need for a nonce, since commits can't collide, and neither can op IDs
4. `OpId` can just be an alias of `EntryId`
The disadvantage of course, is that we have to be mindful of how we
create op transactions, since each transaction creates an addressable
unit. For example, we must not include multiple patch revisions in the
same transaction.
The fetch implementation will potentially fetch the local operator's
remote, which is unnecessary and could result in deleted data.
Fix this by threading the local operator's public key and add an
ignore refspec to the fetch arguments, i.e.
^refs/namespaces/<local>/*
The implementation also strictly fetches all or one namespace. This is
improved upon by introducing a new variant for specifying a set of
namespaces.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The method `track_repo` only accepted the RID as the argument for
tracking.
Instead, allow passing Scope as an argument for tracking a
repository.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The tracking configuration has no way of consulting for a configured
scope.
This change allows the storing of this scope inside the tracking
`Config` -- currently unused.
The default Scope is chosen as Trusted, so that nodes do not
implicitly track any other node. If this behaviour is desired -- for
example, for seed nodes -- then All should be chosen.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The DelegatesOnly scope is very limited and causes more confusion than
it solves.
The Trusted scope subsumes DelegatesOnly since it implies delegates
along with any tracked nodes. This feels more natural to use and so
DelegatesOnly is removed -- leaving only Trusted and All.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously the alias field was simply a string which could possibly be
empty. Some checks were made to see if this string was empty.
Instead, make the logic more obvious by making the alias field
optional.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The MockStorage holds an inventory of repositories and their
identities but when asking for a MockRepository, none of this
information is transferred.
Add `id` and `doc` fields to MockRepository for defining some of its
functionality.
In addition, add a generator for a nonempty MockStorage to use in
tests that will expect the storage to be populated.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Getting delegates for a repository is a common task. A method is added
to ReadRepository for this, which default to fetching the identity
document, verifying it, and return the delegates for that identity.
The connect command was unimplemented for both Node and the control
socket.
This wires up the connect functionality in both places.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Alexis Sellier
Slack Coder
Fintan Halpenny
Sebastian Martinez
Han Xu