For stable commits, use the same timestamp as the CLI tests do.
This preserves that commits that are created in the Signed References
module appears as "now" in the output.
Instead of repairing downgrades, automatic migration could fail.
This occurs when attempting to load signed references, and a downgrade
is detected while coalescing `RepositoryInfo`.
Similarly to how fetch recovers, automatic migration must also recover
by detecting for the downgrade error, and allowing the migration to
happen in this case.
Teach the `rad sync` and `rad clone` commands to accept the
`--signed-refs-feature-level` option. This option configures that
fetch to use the minimum feature level provided when fetching from
other nodes. This overrides the value of
`node.fetch.signedReferences.featureLevel.minimum`, and should only be
used in scenarios where it is necessary to downgrade the security of a
fetch for backwards compatibility.
To achieve this, the `Handle::fetch` method introduces an optional
parameter for threading through the `FeatureLevel`.
Add a configuration knob `node.fetch.signedReferences.featureLevel.minimum` to
allow node operators to enforce more strict verification when fetching
Signed References.
In order to allow automatic migration to the feature level 'parent',
introduce a way to force writing signed references, even if the
user-controlled refs are unchanged.
To detect the special case of a Signed References history with a single
and root commit (which would otherwise be detected as feature level
'parent', even though the `refs/rad/sigrefs-parent` ref cannot be
written), keep information about the parent commit in `SignedRefs`.
The output of `rad inspect --sigrefs` is changed to match the more
strict interpretation of the feature level for histories with a single
and root commit.
In order for users to be able to inspect the feature level of Signed
References in a repository, have `rad inspect --sigrefs` attempt to
load Signed References, and, if successful, print the feature level.
To be able to reason about backwards compatibility, downgrade attacks,
and future configurable enforcement of minimum required (security)
features, introduce the concept of a "feature level" in Signed
References.
In this implementation feature levels are assumed to be monotonic, i.e.,
that higher feature levels behave like lower ones, and only add
semantics on top.
Implementing this as an `enum` that is `Ord` flows nicely.
Treatment of the write-side is left for the next commit. Currently,
the write side "promises" `FeatureLevel::Parent`, but is not able
to "keep the promise", since it does not actually inspect the
feature level of the head in case it is unchanged.
CHANGELOG
In issue
29c6c6fc8171287faa0079798ba2d6e3e7fd86f3
was noted that it would be nice to use value parsers for the timeouts in
the CLI.
This patch implements this.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Co-Authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
This patch adds a blank line to seperate the issue reply header from the
issue reply payload.
This makes visually parsing the output easier.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Configuration of database connections is not performed on `open`, which
leaves room for error (e.g. to miss specifying configuration).
Methods on `Profile` automatically supply the configuration of the
profile.
In testing code, just using the default configuration suffices.
Adds the `rad config schema` to the `rad-config` test so that changes
to the schema will result in errors, forcing the implementor to ensure
the changes are correct.
To prepare for future changes, warn users if their config file currently
does not explicitly specify a default seeding policy.
Because there are now potentially multiple warnings generated that all
relate to the configuration file, group these together and adjust the
wording to be more uniform.
The previous implementation used 'all' as the default for scope, this
could lead to surprising behaviour where a user would fetch all
references for cloned and seeded repositories. Instead have a progressive,
safe by default value - where it fetches only 'followed' references. Later
a user can decide to set the scope to 'all'. NOTE: the default policy
scope was not changed from 'all' and is intended to be changed at a
later date.
Previous implementation used the default scope when a scope wasn't
present. Scope is not present when the policy is block, because block
doesn't have a scope. Instead use an empty string when printing the
block policy.
Help text generated by `clap` contains the full file name (including
extension) of the binary. On Unix-like systems, binaries commonly do not
have any file extension. On Windows, ".exe" is common.
To allow testing such output, introduce a new marker "[EXE]" that is
substituted accordingly. The idea and syntax is taken from
https://docs.rs/trycmd/1.0.0/trycmd/#toml
Command line parsing differs on Windows vs. POSIX compliant operating
systems (just consider the differences in handling `\` for paths vs. as
a marker for escape sequences). Thus, on Windows use `winsplit` to
split command arguments instead of `shlex` for Unix-like OSes.
`winsplit` is a small crate with no other dependencies.
The `From<String> for Message` implementation has an interesting
interaction between `clap` and how `Message` can be used from the
command line.
Note that `FromStr` is not implemented for `Message` – which usually
what is to be expected for use with `clap`, but in fact, `clap` also
allows `From<String>`.
This would make `Message` be a required option when using `rad issue comment`.
It is not possible to use `default_value_t` because that required an
implementation of `Display`, which in this case we do not want to
implement. Trying to use `default_value = "Message::Edit"` also would
not work – it uses that as the text.
So, the solution is to mark it as optional, and default to
`Message::Edit` when it is not specified.
This command is confusing in name and function. Rather than creating
a hard fork of a repository, with a new identity, it pushes the
default branch to the local user's namespace.
Deprecate it and add some help text.
When a non-delegate attempts to update the identity document, their
action will be rejected.
Provide a better error, along with a hint, to the non-delegate.
Changes the `Error::WithHint::hint` field to use a `String` type instead of
`&'static str`. This allows the caller to provide extra hint
information.
To make it easier to use an `Error::with_hint` constructor is added.
Instead of changing `impl From<SystemTime> for LocalTime` to `TryFrom`,
the implementation was removed, as there are not many callsites, and
they are well served by `LocalTime::now`.
radicle-localtime: drop TryFrom SystemTime
radicle-node: switch SystemTime usage with LocalTime
Introduce the `radicle-core` crate for housing data types that are at
the core of the Radicle protocol. The initial data type being added is
`RepoId`. To make the crate as lightweight as possible many of
dependencies are optional and gated by feature flags.
The crate is marked as `no_std` even though it unconditionally depends
on `radicle-crypto`, which is *not* `no_std`. This is to invite
refactoring of `radicle-crypto` to `no_std` at a later time.
The `localtime` crate was defined by cloudhead, and is a minimal
repository with a single `lib.rs`.
Instead of using it as an external dependency, copy the code directly
into a new workspace crate `radicle-localtime`.
The default `serde` implementation goes through the `LocalTime`'s
seconds values rather than milliseconds, since this is the more common
format. This allows the removal of the `serde_ext` functions.
The one place milliseconds was used was for the
`radicle::cob::common::Timestamp` type, where the `Serialize` and
`Deserialize` implementations are manually written.
It also adds a `schemars` feature to remove `schemars_ext` functions
in `radicle` as well.
The message that is returned by `gix-transport` for I/O errors can be
unhelpful, since it does not provide the reason for what happened.
Instead, surface the error so that it provides more detail for logging.
Introduce the use of `clap_completion` for generating static completion.
The shells that are supported are the ones that are included in `clap_complete`:
- `bash`,
- `elvish`,
- `zsh`,
- `fish`, and
- `powershell`.
Co-authored-by: Michael Uti <utimichael9@gmail.com>
Co-authored-by: Lorenz Leutgeb <lorenz.leutgeb@radicle.xyz>
The previous message is included in the error:
! [remote rejected] master -> refs/patches (patch commits are already included in the base branch)
To make it clearer to the user, also print a warning to tell them that the
commit was in the base branch – including the commit SHA:
warn: attempted to create a patch using the commit f2de534b5e81d7c6e2dcaf58c3dd91573c0a0354, but this commit is already included in the base branch
If a seed for syncing does not have an address, the local node will not be able
to connect to it.
These can be filtered out so that no connection attempts are made for these nodes.
Previously, the remote helper would not support the `--force-with-lease` option.
This change introduces this support and ensures that it works as intended.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Refactors the external command logic into a struct.
This allows for methods to maitain the logic of an external command.
It also allows for a cleaner output for the executable name – avoiding the debug
output of OsString using `""`.
The other variants of `terminal::args::Error` were no longer used.
The only variant required is `Error::WithHint`.
The enum is also made private, since it is only used in this crate.
These helper functions were for parsing arguments passed via lexopt.
Since `clap` is now the parser for these types, these functions are no longer
needed.
The `help` module is no longer needed, since `clap` handles that.
This meant that the re-exports of each command's `ABOUT` could be removed and
the `const`s can now be private.
Now that all commands can be parsed by clap, remove any custom parsing and
directly use `CliArgs::parse`.
The `Diff` command was removed, since only one `external_command` can be
declared for a subcommand. The handling of `rad diff` is now done via the
`External` variant. If the subcommand name is `diff` then this is executed,
otherwise delegate to the possible `rad-{exe}` command.
Also of note, the `rad inspect` command has an alias `rad .`. This changes the
behaviour of `rad . --help`. Before, it would print the help of the `rad`
command. Now, it prints the help of `rad inspect`.
Co-authored-by: Lorenz Leutgeb <lorenz.leutgeb@radicle.xyz>
Due to the idiosyncracies of this command there are a few things to note about
this migration.
The `rad sync` command acts as a default subcommand in itself, in that it has
options that do not apply to its subcommand, `rad sync status`. This means that
the options will print with `rad sync --help`, but they will not print with `rad
sync status`.
The `--inventory` flag is not compatible with any of the other flags and
options, thus they are all marked with `conflicts_with`. This cannot be done for
a positional argument, so `clap` will "helpfully" print out the usage, for
example, as:
error: the argument '--inventory' cannot be used with '--fetch'
Usage: rad sync --inventory [RID]
For more information, try '--help'.
Which is incorrect, since `RID` is ignored. This is explained in the `--help`
documentation for `--inventory`.
Co-authored-by: Lorenz Leutgeb <lorenz.leutgeb@radicle.xyz>
Moving the sub-comment actions to be beside the top level comment action. This
is mostly to provide a better diff for the next commit – that refactors due to
`clap` changes.
We decided to use the value names to indicate which type the value
is parsed into (instead of just saying that the value is a `STRING`).
This makes the value names consistent with other commands again.
This implementation works around the fact that `clap` does currently
not support value parsers for a series of values, so representing
`--payload` as a `Vec<Payload>` does not work.
Instead, we parse eveything into a `Vec<String>` and do the validation
on the application side.
Using value parsers for a series of values will probably be supported in
`clap` v5, though.
Fintan Halpenny
Lorenz Leutgeb
Matthias Beyer
Defelo
Adrian Duke
Yorgos Saslis
Yaroslav Halchenko
Sebastian Martinez
Richard Levitte
Erik Kundt
Lorenz Leutgeb