Instead of producing an error when there is no update during `rad id
update`, a message that the document is up to date is printed. The
command is considered is considered successful.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The previous implementation of using the `--allow` option in `rad id
update` would be an absolute list, rather than additive. That is, if
there were existing DIDs not passed in via `--allow` then they would
be remove.
Change this behaviour to check the existing value of the document's
allow list, and add to it if `--allow` is specified.
To enable the user to also remove a DID, the `--disallow` option is
also added.
The correct usage of these options is improved by checking the
validity of the `--visibility` option being used, the current state of
the repository's privacy, and the use of the `--allow` and
`--disallow` options.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, our advertized inventory was not always correct: when we
stopped seeding a repository, it was still advertised as part of our
inventory until node restart, because the `Storage` type doesn't have
access to seeding policies.
In this change, we remove the concept of inventory from `Storage` and
make the authoritative place for it the routing table in our database.
To make this work, we have to add our node to the database on profile
creation, to not violate the foreign key constraint on the routing
table. Hence, the tests are changed to include our alias which is now
always available.
This is a change to the `config.json` file which removes certain options
that are best not touched and changes some options to make them easier
to work with.
1. We change the default journaling mode to "wal" and remove the config
option.
2. We remove the option to set the peer connection "target", as it's not
a good idea to set this to a different value, as it affects the
network.
3. We combine seeding policy & scope, since there's no need to set the
scope when the policy is "block". In that case, we always want to
block "all" remotes. The new policy configuration has the following
schema:
{ seedingPolicy: { default: "block" | "allow", scope?: "all" | "followed" } }
The "scope" key is not used when "default" is set to "block".
4. We add an `extra` field to the node config for options that are not
recognized. We use this to warn the user.
In the case of an out-of-sync local node, we were showing the wrong tip.
Additionally, mark your tip as unannounced if it isn't announced. This
isn't fool-proof, but can be useful to debug certain issues.
Introduce an `UploadPack` type for keeping track of relevant data from
upload-pack events and displaying progress to the terminal.
It keeps track of the number of remotes that are being uploaded to as well as
the throughput of transmitted data.
The `Progress` events are logged rather than being displayed since they don't
provide any useful details to the user.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
* Remove `rad sync --force` flag
* Remove `rad clone --private` flag
These flags are no longer necessary. Simplify specifying which seed
to fetch from with `--seed` is enough.
To ensure that the `rad id` command does not modify the project payload without
it being able to be deserialized into the `Project` type, the command performs
this check throught the `project` method, and returns an error if this fails.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
As a response to Issue # c4134924cf2ce84444c6f7235a27651ad49311b5.
A no-op command in rad inbox defaults to show, but the inbox argument parser
only permits --repo in instances where the operation is explicity declared.
Here, the check for an explicit operation is removed so one is never required.
To improve the user experience of `rad init`, the events listener waits for
upload-pack messages indefinitely. The spinner reports back the upload progress
over time.
This process can be cancelled via Ctrl+C without affecting the announcement,
since that is happening in the background.
To also improve the experience, the remote NIDs that have successfully synced
are reported to the terminal.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The timeout for a `UnixStream` will interrupt a `read` even when more data is
available. The preference would be that the timeout applies to each read, where
the timeout is reset again once a read is successful. This better supports
streaming semantics expected for the `Handle::subscribe` method.
To achieve this, the `LineIter` type holds the `UnixStream` and timeout
`Duration`. The `Iterator` implementation can then use `read_line` to progress
the stream one line at a time, and the timeout only applies to each read.
Co-authored-by: Alexis Sellier <alexis@radicle.xyz>
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
* Try to use constants instead of strings
* Move crypto seed override out of radicle-crypto
* Use GIT_COMMITTER_DATE for commit overrides
* Use RAD_LOCAL_TIME as general time override
* Allow variables to be used in release mode
* Add `--force` flag to force a fetch even if the node is not a seed.
* Don't fail if we can't connect to a node during a fetch.
* More accurately exit when we hit our replica count.
When `--private` is passed to `clone`, we force a fetch from nodes that
aren't known seeds.
When it isn't specified, we skip nodes that aren't known seeds, even if
they are in the preferred seeds list. Previously, we would still fetch
from them, which would cause errors.
Implement this function on `RemoteRepository`, and move `repositories`
to the trait level.
This function will be used to quickly get the `RefsAt` of all repository
remotes.
There are two areas where we can be more tolerant of delegate namespaces
being missing or not validating:
1. Calculating the canonical HEAD
2. Fetching from a remote
In 1. the protocol is tolerant in that if the local node does not have
the default branch for a delegate, it will still attempt to use any of
the delegates it does have to reach the threshold.
This is made safe by ensuring that if the threshold is being updated
then the node performing the update must have a threshold of delegates
locally in their storage. It also made safe by 2.
In 2. the protocol is tolerant by allowing delegates to be missing
from the serving side, as long as they can still meet a threshold of
delegates. This is further tolerant, when validating the received
data, a threshold of delegates are valid to consider the fetch
successful -- otherwise it will fail.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, we only kept tracked of unsynced nodes we were connected to.
Now we track all unsynced nodes, since announcements are relayed.
We also cap the replicas to exit earlier in case of very low replica
count.
We distinguish between the cases:
a) There are no seeds at all.
b) There are no seeds to announce to despite the user wanting a higher
replication factor, for example.
Instead of waiting for *all* configured/preferred seeds to be synced,
we wait for at least one.
Note that the previous behavior can still be used by setting
`--replicas` appropriately.
The inventory operation of the `rad sync` command does not require an
RID. Localise resolving the RID in the match arms that require it.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of re-loading the full inventory on `rad init`, we simply add
the new repository to the in-memory cache.
We also keep track of whether a fetch was a full clone, to know when
to update our routing table.
When running `rad patch list`, show the set of delegate reviews for
each patch, with the following meaning for the symbols:
- ✔: delegate has accepted the patch
- ✗: delegate has rejected the patch
- -: delegate has not made a verdict on the patch
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the user passes a <path> argument to init, it is incorrect and a
bit confusing to reference the "current directory" or "this directory"
e.g. "run rad . in current directory" when the repo was not created in the
current directory and was created with a path argument instead.
Use the path provided by the user in help text, otherwise reference
the current directory.
If `rad id` is called with no arguments, or just `--title` and
`--description`, then it will fail because there were no changes made
to the identity.
Check if the `proposal` document is the same the `current` document,
and if so supply a hint and a better error.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When the `rad inbox` command would come across a reference name that
it did not recognise as a `Cob` or `Branch`, then it would fail with
an `Unknown` error.
Instead, add an `Unknown` variant to `NotificationKind` which can be
displayed in the `inbox` CLI, by using the `--show-unknown`
flag. Otherwise, it will be skipped and the inbox will work as usual.
While refactoring, the `TypedId` type is used for the `Cob` variant to
simplify some of its uses.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Help the user know which revision they currently have checked out when
running `rad patch checkout`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the name is available to show for the repository -- it may not be
if it hasn't been replicated yet -- then add it to the output of the
`rad seed` command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The documentation for `rad inbox show` and `rad inbox clear` were
missing.
Add documentation into the help message for both.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This writes out information that may be useful when debugging Radicle
remotely on a user's machine. Things like versions of programs, and
values of relevant environment variables.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
If any replies to patches were made, it was not possible to see them
in the output of `rad patch show`.
Add the replies to show output, but only if the `--verbose` flag is
set.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The option to reply to a comment was undocumented in the `rad patch
comment` command.
Add the option to the "Comment options" section of the help message.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To make things a little more consistent, move the `rad self --address`
command to `rad node config --addresses`, since it's more about
externally-facing configuration of the node, rather than your local user
or profile.
In order to bootstrap the COB cache, and also in case of issues,
supply a command for caching a set of patches/issues, or a single
patch/issue.
This is necessary since reads are not read-thru, it may appear that
COBs are missing when in fact they haven't been cached when first
moving over to the cache.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Implement caching for the `Issue` and `Patch` COB. This is achieved by
having the `Transaction::initial` and `Transaction::commit` methods
take a cache which can update the newly created/updated object. The
`Store::remove` method also takes the cache for removing the object
from the cache, as well as the repository.
This meant that the `*Mut` types for the respective COBs are required
to carry a cache alongside the repository store. Identities will not
be cached, and so this is always set to `NoCache` -- which performs no
caching, and always succeeds.
To perform cache reading for issues and patches, the `cache::Issues`
and `cache::Patches` traits are introduced. They capture the minimal
amount of methods that are needed for the `rad issue` and `rad patch`
CLI commands.
The implementor for each of these traits is there respective `Cache`
types, which combines their backing repository store and the SQLite
database. They both provide convenience methods:
- `create` (and `draft` for patches)
- `get_mut`
- `remove`
which can be used instead of their repository store counterparts.
All uses of the repository stores (where needed) are replaced with
`Cache` types.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shows you updates on local repositories.
Included here is a basic implementation of a notification system. A new
database is created and updated after every fetch, with refs that have
changed.
The `rad inbox` command can then list items in the database and delete
them.
Fintan Halpenny
cloudhead
Alexis Sellier
Lars Wirzenius
Lorenz Leutgeb
RadsammyT
Sebastian Martinez
Michael Raitza
josibake
Zlatan Todoric
Christopher Fredén