Ref announcements contain the namespace (NID) and the SHA of the new
`rad/sigrefs`. This information can be used by the fetch protocol to
fetch only those `Oid`s for those namespaces.
Add a new stage `SigrefsAnnouncement` that captures this behaviour by
only asking for the advertised `Oid`s and updating the corresponding
`rad/sigrefs` for each namespace. Note that this is a special case of
the `SpecialRefs` stage and so the protocol chooses between these two
by checking if there was announcement passed through. The following
stage, `DataRefs`, stays the same.
Note that this stage can only be activated via a `pull`, and `clone`
stays the same.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The RefsAnnouncement previous announced its complete set of
`rad/sigrefs`. This was useful in that verification can occur on the
receiveing side immediately by verifying the refs and proceeding with
the fetch -- note that it did nothing with the ref information it
received.
This can be minimised to only advertising the namespace, i.e. the
NID, and the new SHA of the `rad/sigrefs`. This is represented by a
new message type, `RefsAt`, which contains the NID and the Oid.
For checking if an announcement is stale or fresh, the receiving
side can check the existence of the SHA in its Git repository.
The tests are appropriately modified to use NIDs and Oids.
To prepare for a follow-up change, the announcement data is also
threaded through for the fetch protocol to focus fetching only the
advertised set of Oids.
N.B.: because the refs aren't communicated, the verification happens
when fetching since the data needs to be fetched before
verifying. This is a trade-off with minimising the message payload for
verifying earlier.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
While there is a method, `unbound`, for converting a `BoundedVec` to
its inner `Vec`, it is common practice to implement the `From` trait.
Add the `From` conversion for `BoundedVec` and `Vec`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When performing a clone there are two potential issues.
The existing issue is that when a repository is created to clone into,
it does not contain any data initially. This leaves other node
operations thinking that a repository does exist but when they try to
perform operations on it, those will fail. These will be surfaced as
warnings but the node will continue to operate.
The other issue, while writing fetch v2, is that if a clone fails,
then cleanup needs to be performed -- to remove the empty repository
from storage.
To tackle both these issues, a temporary directory is used in the
place of the repository. If a clone fails then the temporary directory
is dropped and nothing needs to be done. If the clone succeeds then it
can be safely moved to the storage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, if a delegate's namespace was fetched and its rad/sigrefs
was behind the current state, then it would fail to perform the fetch.
Instead, when the ancestry path is checked the outcome can be used
during the update:
1. If the tip is equal, then the update can be marked as skipped.
2. If the tip is behind, then the update can be rejected, iff the
policy does not allow it.
3. If the tip is ahead, then the update is a fast-forward.
4. If the tip is diverged, then the update results in a failure, iff
the policy does not allow it.
The protocol also prunes any delegates's updates when the `rad/sigrefs`
is behind and returns an error if they are diverged.
For any non-delegates, it will simply prune them.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Previously, we would always ask nodes for messages from one hour ago.
This meant that we could miss messages if our node was offline for more
than an hour. This change uses a variable backlog by checking the
timestamp of the last gossip message we received.
Instead of storing received gossip messages in an in-memory `BTreeMap`,
we persist them to the database (`addresses.db`). There are two reasons
for this:
1. Node restarts do not wipe the state, meaning that it is much less
likely that some gossip message will get lost before reaching all
nodes.
2. This will allow us in the next commit to know how far behind we are
after a restart, to be able to request the correct time range of
gossip messages that we missed while offline.
Note that we now share the addresses.db file between two connections and
stores, which we don't do anywhere else. Having multiple connections to
the same database is fine, but the way we're having to do it is a bit
awkward. In a future patch, we could pull out the database schema from the
`address` module and rename the database to make things clearer.
The git-daemon code is no longer needed since git-upload-pack is used
in its place.
Remove the git-daemon code from the runtime and worker.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Make the validation logic customisable by extracting it out into a
separate trait that can be defined by other crates.
The Repository validation logic stays the same.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of returning the unsigned references, the validation of a
repository's remotes returns the set of validation errors. The caller
is then expected to handle these validation errors appropriately, for
example, by logging them and re-raising an error.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The `service::tracking` module has nothing specific to the
radicle-node code. This means that it can be moved to radicle under
the `node::tracking` module.
This makes it more resuable in other contexts, for example, for
fetching logic.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This change allows users to track/untrack peers and repos without a
running node. This fixes a bug when running `rad init` without the node
running, where the repo would be tracked with a different scope than
what was specified on the CLI.
Introduces a new COB type to store repository identity documents.
The reason for this change is to:
1. Simplify the code, as the identity document logic resembled a COB,
yet it had custom logic. This allows existing COB code to be used for
identities.
2. Make identity document update logic more flexible, since COB actions
can be added in the future.
3. Re-purpose existing tools around COBs to work on identities, eg. `rad
cob`.
4. Unify the concept of an identity change proposal, with regular identity
changes. This means we can remove the `id.proposal` COB in favor of
using the `id` COB itself.
Notes
-----
* Each repository has one Identity COB.
* The `Proposal` COB has been repurposed into the `Identity` COB.
* Identity documents are stored as *embeds* inside the Identity COB
actions.
* The action that contains new document versions is called `revision`,
just like the Patches COB.
* The namespaced `rad/id` ref is a symbolic reference to that Identity
COB.
* The canonical `rad/id` ref is a direct reference to the commit in the
Identity COB that contains the latest *accepted* revision of the
document.
* All commands for managing identities have been folded into `rad id`.
Hence `rad delegate` and `rad edit` are removed.
* The concept of "rebasing" an identity document is gone.
* The `rad id` output has been updated to match the style of other
commands.
* When a revision has enough signatures, it is automatically adopted as
the current identity, there is no longer the need for a "commit"
action.
* When an identity revision is proposed, and the current identity has a
threshold of `1`, that identity is automatically accepted due to the
above point.
* The idea of "verifying a peer's identity branch" no longer applies, as
COBs cannot be verified one history at a time.
* Since the root commit of the Identity COB does not have a "Resource"
to point to (it would have to point to itself, which is impossible),
we've made the resource id optional for COBs.
We were being too strict by requiring that no routes existed that
weren't passed into the function. This isn't really useful for testing,
since we're more interested in checking that certain routes are there,
rather than testing that *only* those routes are there.
When a fetch is user-requested, a timeout can be supplied that is passed
down to the worker.
When a fetch is service-requested, a default timeout is used.
Private repos are implemented by extending the identity document with a
`visibility` attribute, that can either be `"public"` (default) or
`"private"`.
In case of `private` visibility, only the delegates are allowed to view
the repo, as well as any DIDs added to the allow list.
To implement repo visibility, we simply block fetches from and
announcements to peers for whom the repo should remain invisible.
Private repos are also not announced in the `inventory` message, since
the full list of peers that *may* have the repo is retrievable from the
repo identity. This could cause errors if eg. a peer who is allowed to
view the repo doesn't actually have it. However this is an ok trade-off
for now to keep the complexity low. For repos to truly be private, it's
important that the RIDs don't leak either.
Finally, we modify `radicle-httpd` for now to only list public repos.
Eventually, we would want to change this depending on whether an allowed
peer is authenticated with the service or not.
---
It's also worth mentioning why this approach was taken, vs. end-to-end
encryption. The reasons are as follows:
1. Nodes that do not have access to a private repo will generally not want to
replicate encrypted data that they cannot examine or use.
2. The chosen solution is trivial, while encrypting git objects isn't.
3. Performance of the chosen solution is much better, there is no
overhead.
4. Privacy of the chosen solution is better: RIDs are never leaked, and
neither is the existence of a private repo, nor who has access to it.
There is one downside: Paying for storage of private repos is no better
in terms of privacy than what GitHub offers. Hosting providers will have
access to your private repos, if this solution is used.
Add `deny.toml` with a few exceptions, and update certain dependencies
to get rid of duplicates.
Running `cargo deny check` will yield some warnings still, but no
errors.
This change allows for files (blobs) to be embedded into COB entries.
This allows for things like image attachments in issue comments for example.
For now, we only enable this in the `issue` COB.
The way it works is that relevant COB actions carry metadata about which
files are attached to them; and we store those files as blobs inside the
COB entry's *tree* object, under an `embeds/` folder.
The `Embed<T>` type is used for the above, and either carries actual
content, or carries a content-id. Retrieving the actual content is as
simple as asking the repository for a blob with that content-id.
As a possible future extension, MIME types could be stored alongside the
files in a "metadata" file. This could help clients display the content
appropriately.
This is a breaking protocol change that prefixes all gossip messages
with their length.
This is to allow message extensions, as we'll be able to read the whole
message inclulding the extensions, without having to decode the
extensions.
It also makes it easier to check the message length before we start
decoding, so that we can reject messages that are too big.
When an option is available as part of the node configuration
(`config.json`), we remove it from the CLI options of `radicle-node`.
Instead, we allow a different config file to be specified via the
`--config` option.
This adds functionality so that on `rad sync` and `rad clone`, we
connect to known seeds if necessary, before attempting to fetch.
In passing, some related changes were made:
* The `rad sync` command's arguments were reworked:
`--replicas <count>` can be used to specify a replica count when
fetching
* The `rad patch` command no longer has a `--fetch` option
* It's now possible to tell the node not to automatically connect to
peers in the background
* `AddressBook` is being used underneath `Seeds` to allow for shuffled
iteration
Only return once the connection is established or failed.
It's still not perfect, as several failure scenarios are not handled,
but it's an improvement.
We move the session address to the top-level struct, since it's needed
in a bunch of places. This change is required for the rate-limiting
code that is coming next.
Improve the logic when choosing addresses to connect to. Previously we
would wait much too long, even for good addresses. This was especially a
problem when the reason for disconnection was simply a node restart.
As a starting point, we populate the address book (if empty) with some
bootstrap nodes which are trusted.
To prevent these nodes being connected to during tests (including e2e
tests), we create a new constructor for `Config` that is used in tests.
Note that a `cfg(test)` check is not enough given that e2e tests don't
have that set.
Instead of using a command name plus arguments, we use a new `Command`
enum that is similar to the one in `radicle_node::service`. This way,
we're able to have more complex commands and parsing is simplified.
It turns out that the CRDT formed by the union of Git DAGs
is enough to guarantee everything we need for COBs.
This changes the following things:
* COB operations no longer need to be commutative
* COB histories are traversed in the same deterministic order on all
replicas
* It's now possible to implement RSMs on top of COBs, eg. scripting
* Lamport clocks have been removed
* `radicle-crdt` is no longer a dependency of `radicle`
* COBs are no longer instances of `Semilattice`
* The `Ops` type was removed in favor of having `Op` contain multiple
actions
This commit addresses a workaround previously implemented to
include the SQLite library bundled inside the binary.
The upstream have successfully merged the patch that implements this
solution [1], allowing us to safely incorporate it
into our codebase.
[1] Link to the merged patch: https://github.com/stainless-steel/sqlite/pull/71/files
Fixes: 431a389944
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Fintan Halpenny
cloudhead
Michalis Zampetakis
Alexis Sellier
Slack Coder
Vincenzo Palazzo