Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
Previously we panicked if a revision wasn't found after an update. But
it can happen that the update goes through yet a concurrent update
prevents the revision from being valid.
To partially deal with this, we don't try to lookup the revision after
an update, we simply return the ID. This means a subsequent lookup can
fail, and the error can be handled there.
Split the commands and change the naming.
* Tracking a repo is now called "seeding"
* Tracking a peer is now called "following"
In this commit, we don't change most of the internal code, only the
user-facing part.
It is more natural for the review command to exist as a subcommand of
patch, since the reviews are for patches.
Remove the `rad review` command, moving its functionality to the `rad
patch` command. The rad-patch.md and rad-review-by-hunk.md tests are
modified to use the `rad patch review` command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Use the derive and `#[default]` mechanism for deriving the default of
`Message`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Rename the --remove options to --delete for assign and label, to be
more consistent with review, and let this be the standard.
Clean up any typos around labels/dids and issues/patches.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Make the CLI easier by unifying the label and unlabel, using `--add`
and `--remove` options instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the assign and unassign commands to exist as
subcommands of the object they are assigning to, i.e. issues and
patches.
Remove the rad assign and rad unassign commands, moving their
functionality to the rad issue and rad patch commands. The
rad-issue.md and rad-patch.md tests are modified to include a assign
test.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Align the naming with the field itself and Patch::assignees.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the label and unlabel commands to exist as
subcommands of the object they are labelling, i.e. issues and
patches.
Remove the `rad label` and `rad unlabel` commands, moving their
functionality to the `rad issue` and `rad patch` commands. The
`rad-issue.md` and `rad-patch.md` tests are modified to include a
label test.
The `rad patch show` command did not support showing labels as part of
its output. This was also included to confirm the test above was working.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a routing database, and an addresses database,
consolidate that in a single database called `node.db`.
We also simplify database access, by providing a single type for opening
the database, and use traits to access the various functions.
We create a new `seed::Store` that has seed-related methods split out of
the `address::Store`.
Note that tracking is still in its own database currently, as it isn't
ephemeral state. This makes it easy to delete the new `node.db` without
risk of losing any important information.
To avoid renaming all database methods, we create a `Stores` wrapper
that allows us to access routing, addresses, seeds etc. without type
ambiguity.
This is a breaking change and requires `addresses.db` and `routing.db`
to be deleted.
My use case for this is to have a script that lists my outstanding
patches so I can ping people for review or merge if there's no
movement for a long time.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
Allow the caller of `rad sync` to `--sort-by` the NID, alias, or
status of the seeds.
This prevents random ordering, due to timestamps, in CLI testing.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's necessary for a delegate's references to be present, e.g.
verification, calculating of canonical data, etc.
To ensure that a user does not get themselves into a state where they
have added a delegate without their references, prevent adding a
delegate to the identity document if their `rad/sigrefs` is not
present.
As well as this, it ensures that if there is a `rad/sigrefs` that it
has the default branch -- since it's possible for a peer to have created
`rad/sigrefs` through COBs without a default branch.
This change meant that the `rad-id` tests required the test scenarios
to be set up with all nodes having each other's references. A test
case to add a missing delegate was also added to `rad-id.md`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the local peer does not have any `rad/sigrefs` then there is no
risk of any data corruption. In this case the repository can be
removed entirely.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Removing a repository completely can result in data corruption for
users, since a user's `rad/sigrefs` are the ground truth of their
state, and any fork of them results in errors in the protocol.
Instead of `rad rm`, we replace it with `rad clean` that removes all
remotes other than the local peer's namespace and the delegates'. The
delegates are also necessary to keep, since the repository's identity
is dependent on them.
Note that the remotes that were cleaned will be populated again upon
fetching, as long as they are tracked.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Distinguish between repos that are simply tracked, vs. repos that are
cloned (and thus forked). By default, we don't show repos that don't
have a local fork.
Add the `--revision` option for `rad patch checkout`. This allows the
user to specify a particular revision of the patch to checkout. If the
revision is not specified it will use the latest revision of the patch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add the `--name` option to `rad patch checkout`. This allows the user
to name the branch they are checking out, rather than use the
`patch/<short-id>` format.
This change includes returning early for setting the upstream branch,
if the upstream already existed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add a `--force` flag to forcibly checkout the branch to the latest
revision, if the branch already exists.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Currently, if refs are updated while the node is stopped, these refs are
not immediately announced when the node starts, due to the node being
unaware of the updates.
To remedy this, on startup, we compare the refs we have in storage with
the refs we announced to the network. Since only our own refs could have
changed while the node was stopped, this change only applies to owned
refs. If we detect that storage has changed while the node was stopped,
we create ref announcements for the updated repos and store them in our
gossip database. These announcements will be included with other
historical gossip announcements when nodes connect to us.
To keep track of what was announced, we store our local node's sync
status in the database. This is also useful when using the `rad sync status`
command, as it tells us what oid our local node is at, and whether it
is aware of our local changes yet.
In addition to this, we make a small fix: previously, inventory and ref
announcements originating from our local node were not stored in the
announcement database. We ensure that they are via the new `announce`
method.
This command shows the sync status of a repository by consulting the
database via the node.
To make it work, we call into the address store to update the
`repo-sync-status` table when receiving ref announcements that are
relevant to us.
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Fintan Halpenny
cloudhead
Fintan Halpenny
Lars Wirzenius
Thomas Scholtes