Add fx-chip-test example

board-package-source/libraries/ArduboyFX/examples/fx-chip-test/fx-chip-test.ino

@@ -0,0 +1,124 @@
+/* *****************************************************************************
+ * FX chip test example v1.0 by Mr.Blinky          Sep 2023 licenced under CC0
+ * *****************************************************************************
+ * 
+ * This test program can be used for testing and troubleshooting the external 
+ * flash memory (FX) chip.
+ * 
+ * It will show which chip select configuration is selected for compiling and
+ * it reads out the FX chips JEDEC ID and status register information. It also
+ * checks if the FX chip is loaded with a flash image file.
+ * 
+ * Pressing the A-button will reset the status registers and disable any write
+ * protected areas of the FX chip (unless the status register itself is protected)
+ * 
+ ******************************************************************************/
+
+#include <Arduboy2.h>       // required to build for Arduboy
+#include <ArduboyFX.h>      // required to access the FX external flash
+
+Arduboy2 arduboy;
+
+void setup() {
+  arduboy.begin();            // normal initialisation with Arduboy startup logo
+  FX::begin(0);               // initialise FX chip
+}
+
+JedecID  jedecID;
+
+void printHexByte(uint8_t b)
+{
+ if (b <16) arduboy.print(0);
+ arduboy.print(b,HEX);
+}
+
+void printStatusReg(uint8_t cmd)
+
+{
+  FX::enable();
+  FX::writeByte(cmd);
+  printHexByte(FX::readByte());
+  FX::disable();
+}
+
+void loop() {
+  if (!arduboy.nextFrame()) return; // Do nothing until it's time for the next frame
+  arduboy.pollButtons();            // required for arduboy.justPressed
+
+  // Show which chip select this sketch is compiled for.
+ #if defined(CART_CS_RX)  
+  arduboy.setCursor(7,0);
+  arduboy.print(F("Chip select: PD2/RX"));
+ #elif defined(CART_CS_HWB)
+  arduboy.setCursor(4,0);
+  arduboy.print(F("Chip select: PE2/HWB"));
+ #else
+  arduboy.setCursor(4,0);
+  arduboy.print(F("Chip select: PD1/SDA"));
+ #endif
+
+  // Show JEDEC ID
+  FX::enable();
+  FX::writeByte(SFC_JEDEC_ID);
+  jedecID.manufacturer = FX::readByte();
+  jedecID.device = FX::readByte();
+  jedecID.size = FX::readByte();
+  FX::disable();
+  arduboy.setCursor(16,12);
+  arduboy.print(F("JEDEC ID: "));
+  printHexByte(jedecID.manufacturer);
+  printHexByte(jedecID.device );
+  printHexByte(jedecID.size);  
+
+  // Show flash status register
+  arduboy.setCursor(22,24);
+  arduboy.print(F("Status: "));
+  if (jedecID.size == 0x18) printStatusReg(SFC_READSTATUS3);
+  printStatusReg(SFC_READSTATUS2);
+  printStatusReg(SFC_READSTATUS1);
+
+  // Show state of the the flash chips image
+  uint8_t cartSignature[7];
+  arduboy.setCursor(0,36);
+  arduboy.print(F("State: "));
+  FX::readDataBytes(0, cartSignature,sizeof(cartSignature));
+  if (strncmp(cartSignature,"ARDUBOY",sizeof(cartSignature)))
+  {
+     arduboy.print(F("No image loaded")); 
+  }
+  else
+  {
+     arduboy.print(F("Image loaded")); 
+  }
+  
+  arduboy.setCursor(13,48);
+  arduboy.print(F("Press A-button to"));
+  arduboy.setCursor(1,56);
+  arduboy.print(F("reset Status register"));
+  if (arduboy.justPressed(A_BUTTON))
+  {
+    FX::writeEnable();
+    FX::enable();
+    FX::writeByte(0x01);  
+    FX::writeByte(0);
+    if (jedecID.size != 0x18) FX::writeByte(0);
+    FX::disable();
+
+    if (jedecID.size == 0x18)
+    {
+      FX::writeEnable();
+      FX::enable();
+      FX::writeByte(0x31);  
+      FX::writeByte(0);
+      FX::disable();
+      
+      FX::writeEnable();
+      FX::enable();
+      FX::writeByte(0x11);  
+      FX::writeByte(0);
+      FX::disable();
+    }
+  }
+  
+  FX::display(CLEAR_BUFFER); // Using CLEAR_BUFFER will clear the display buffer after it is displayed
+}

board-package-source/libraries/ArduboyFX/src/ArduboyFX.cpp

@@ -991,9 +991,10 @@ void FX::drawBitmap(int16_t x, int16_t y, uint24_t address, uint8_t frame, uint8
         pixels ^= display;
         Arduboy2Base::sBuffer[displayoffset + WIDTH] = pixels;
       }
-      displayoffset++;
+      (mode & (1 << dbfFlip)) ? displayoffset-- : displayoffset++;
     }
-    displayoffset += WIDTH - renderwidth;
+    displayoffset += WIDTH;
+    (mode & (1 << dbfFlip)) ?  displayoffset += renderwidth : displayoffset -= renderwidth;
     displayrow ++;
     renderheight -= 8;
     readEnd();