eda8d5d835
SKY72310: driver refactoring
2024-10-09 21:51:14 +02:00
5cc38316ea
Module17: updated display drivers to new SPI subsystem
2024-10-09 21:50:51 +02:00
5e94d2fef6
GDx: updated nvm driver
2024-10-09 21:24:33 +02:00
9dc449396a
MD9600: updated nvm driver
2024-10-09 21:24:33 +02:00
23e4ce0a8a
MDUV3x0: updated nvm driver
2024-10-08 19:20:59 +02:00
3b877d20df
MD3x0: updated nvm driver
2024-10-08 18:59:05 +02:00
af5d10ec52
MDx: unified the nonvolatile memory driver
...
Merged the NVM drivers of the MDx devices into a single file covering MD-380,
MD-UV380, MD-9600, RT3 and RT3s
2024-10-08 18:58:01 +02:00
a4db8d2242
NVM: deeply restructured W25Qx driver
...
Refactored the W25Qx driver in order to make it an SPI device conformant
to the nvmDevice driver interface. Removed the read/write/erase functions.
2024-10-08 18:45:29 +02:00
ae0a467d2a
MK22: driver for SPI peripherals
2024-10-08 18:36:56 +02:00
4c952e047b
STM32: refactored SPI driver
2024-10-08 18:35:36 +02:00
04698b2279
SPI: refactored spi_bitbang driver
2024-10-08 18:34:51 +02:00
1faf65d11c
SPI: driver for devices with user-provided bus transfer function
2024-10-08 18:34:16 +02:00
83f4e1584a
STM32: added function to retrieve the clock frequency of APB/AHB busses
2024-10-08 18:30:31 +02:00
9ff6375c18
GDx: merged the GD-77 and DM-1801 targets into a common "GDx" one
...
Radioditty GD-77 and Baofeng DM-1801 radios are 99.9% equal, the only
difference being the assigment of a few gpio pins.
2024-10-02 09:37:53 +02:00
76104dd065
STM32: Gpio: fixed possible #include conficts
2024-10-02 09:37:15 +02:00
71d3a2c319
Driver for emulated EEPROM storage
2024-08-14 18:20:06 +02:00
6a1cdb5fd5
Reorganized ttwrplus nonvolatile memory devices
2024-08-14 18:20:06 +02:00
0a2dc3567d
Reorganized GDx nonvolatile memory devices
2024-08-14 18:20:05 +02:00
15e7f562e3
Reorganized MDx nonvolatile memory devices
2024-08-14 18:20:05 +02:00
6aee71ec84
Reorganized Linux nonvolatile memory devices
2024-08-14 18:20:05 +02:00
031eda1d7e
STM32F4xx: fixed bug in gpio driver
...
Fixed bug causing gpios set in alternate function mode to have the internal
pull-up resistor enabled, even if not requested.
2024-07-17 19:07:10 +02:00
3df8657b16
fixed missing static keyword
2024-07-12 09:01:55 +02:00
fe3c54153e
Stm32 DAC: moved parameter for idle level from config to init function argument
2024-07-10 09:16:14 +02:00
fc1fc41f14
Module17: removed old DAC initialization code in platform_init()
2024-07-03 21:47:38 +02:00
cea48f8d57
Linux: added Module17 hardware info flags to allow compilation of UI emulator
2024-06-23 09:46:13 +02:00
e95b5bbb6f
Linux: fixed compilation errors due to missing gpio-native.h header file
2024-06-23 09:39:43 +02:00
e50b8ce80c
Module17: keyboard: do not enable SMBus timeout while using the I2C mode
...
Enabling SMBus timeout in the capacitive touch sensor and not in the MCU would cause the CTS to reset and the MCU expecting the transaction to keep going, locking-up the device.
Timeout should be re-enabled when SMBus will be implemented.
2024-06-21 19:27:33 +02:00
220d4d2ef4
Module17: added VBat measurement to ADC1 driver
2024-06-21 19:27:28 +02:00
4f2c461bf0
Module17: added detection of baseband soft potentiometers
...
Detects the presence of the soft potentiometers. Display the detected potentiometers in the info menu.
2024-06-21 19:26:32 +02:00
b5e49a3b4d
Module17: reorganized display drivers, implemented dynamic selection of display driver
2024-06-21 19:26:32 +02:00
30e9311a20
Module17: added support for hardware revision 1.0
2024-06-21 19:26:31 +02:00
caf3225a87
Driver for CAP1206 capacitive touch controller
2024-06-21 19:26:11 +02:00
40780af16d
Module17: using standard ADC driver
2024-06-21 19:26:03 +02:00
7052dbcf8b
Module17: use hardware I2C for MCP4551
2024-06-21 18:09:53 +02:00
b196ce9cbc
Driver for bitbanged SPI on MCU gpios
2024-06-21 18:00:33 +02:00
539d1b45f6
STM32F4xx: driver for ADC peripherals
2024-06-21 18:00:33 +02:00
8fff2e7361
Driver for STM32F4xx SPI peripherals
2024-06-21 18:00:33 +02:00
07ee9a3369
Driver for STM32F4xx I2C peripheral
2024-06-21 18:00:33 +02:00
b98ea17aee
MK22: updated gpio driver
2024-06-21 18:00:33 +02:00
8842b98a52
STM32F4xx: updated gpio driver
2024-06-21 18:00:33 +02:00
695210d689
GDx: fixed missing audio output from RTX stage
2024-06-21 18:00:18 +02:00
3940405c68
stm32_dac: refactored stm32dac_init() to have a per-instance initialization
2024-06-21 09:58:04 +02:00
81f9257888
Updated radio and display driver stubs
2024-06-17 22:56:06 +02:00
8550e4f7a6
Module17: renamed calibration fields for TX/RX baseband inversion
2024-03-13 08:37:04 +01:00
ed92d81543
Module17: implemented configurable logic levels for PTT in/out
...
See #248
2024-03-13 08:37:04 +01:00
02bcec0bd4
Fix compilation warnings during linux build
2024-02-11 18:06:15 +01:00
3c137a31de
Fixed error in STM32F4 linker scripts causing radio thread lockup
...
Error in linker script definitions made the heap area to start at end of the
64kB CCM RAM, thus effectively allocating memory in an access-protected zone.
2024-02-07 18:37:28 +01:00
fdd08d4bcb
Module17: removed screen contrast setting, added screen brightness setting
...
Module17 uses an OLED display, which does not have contrast regulation. The
contrast control register, however, allows to change the brightness of the
display.
2024-02-06 21:11:41 +01:00
202a199442
Module17: added a 100ms sleep after power off to prevent the board from rebooting.
...
Fix #230 .
2024-02-06 21:08:17 +01:00
adc8b05075
Removed framebuffer from MD9600
2024-02-06 19:19:47 +01:00
b416585819
Dropped framebuffer from GDx display driver
2024-02-06 19:19:47 +01:00
7fc16388e0
Removed framebuffer from Module17 display driver
2024-02-06 19:19:47 +01:00
11d7a92f4e
Removed framebuffer from ttwrplus
2024-02-06 19:19:47 +01:00
5a164fe2ab
Removed framebuffer from SDL display driver
2024-02-06 19:19:47 +01:00
5ff098d2fb
Removed framebuffer from MDx display driver
2024-02-06 19:19:47 +01:00
d119e7d1b2
Moved pixel framebuffer out of display drivers into graphics layer
...
Reorganized code for pixel framebuffer in order to have it instantiated once
and for all the possible display drivers. Dropped the display_getFrameBuffer()
function.
2024-02-06 19:19:47 +01:00
731054a131
Dropped display_renderingInProgress() function from display API
...
Removed display_renderingInProgress() function from display interface as it
has never been used so far.
2024-02-06 19:19:47 +01:00
d8c0ab1c44
Dropped support for 20kHz bandwidth
...
Dropped support for 20kHz bandwith in rtx code and radio drivers. This option
is supported only by MDx radios and so far is not being used at all.
2024-02-06 19:19:47 +01:00
1791e70eef
Using newlib-specific sniprintf in place of snprintf
...
Using the newlib's printing functions without floating point support in order
to reduce the overall binary size. This allows to free up around 15kB of space
in the .text section.
2024-02-06 19:19:44 +01:00
44385b3b25
Using signed 32-bit data type for RSSI instead of floating points
...
Switched to int32_t for RSSI representation to allow running the code also
on devices with limited resources. Defined a new ad-hoc type to still keep
the possibility of using floating points on more capable devices.
2024-02-01 11:07:20 +01:00
5b3929ef44
Moved from float to uint32_t for TX power, substituted dBm with mW in CPS channel struct
...
General code optimization allowing to reduce the overall binary size, especially
for devices without hardware floating point support. On the MD-380 (which has the
FPU) the .text size has been reduced of 4'928 bytes.
2024-02-01 11:07:20 +01:00
dc930f4a4b
Added CONFIG_M17 macro to enable M17 support on each target
2024-02-01 11:07:20 +01:00
24c4a25b2d
Made "static" all the variables local to each translation unit
2024-02-01 11:07:20 +01:00
e54234f968
Renamed UI_NO_KEYBOARD macro to CONFIG_UI_NO_KEYBOARD
2024-02-01 11:07:20 +01:00
8bc867beae
Using Kconfig-style #defines for GPS, RTC and knob type description
2024-02-01 11:07:20 +01:00
cc27cc28a4
Using Kconfig-style #defines for battery type description.
2024-02-01 11:07:20 +01:00
0f4290cdfe
Using Kconfig-style #defines for display parameters' description.
2024-02-01 11:07:20 +01:00
0feb8f9075
Moved GPIO mappings out of hwconfig.h to a dedicated header file
2024-02-01 11:07:20 +01:00
7a31dfba3d
Configured linux target for Module17 emulation similar to a Module17 rev. 0.1e
2024-01-09 12:36:23 +01:00
2ce3f5e949
ttwrplus: Ignore revision from sa8x8-fw version
...
The "revisions since last tag" version field is now accurately named and no longer checked. Extra parentheses also added to reduce compiler warnings.
Fix #217
2023-12-24 10:48:41 +01:00
230e6310c7
Module17: added 100ms blink of sync led to indicate device startup
...
See also #216 .
2023-12-24 10:48:37 +01:00
ab4a964ddd
Linux NVM: added implementation of nvm_getMemoryAreas()
2023-12-07 12:02:48 +01:00
419d02a203
Linux NVM: updated implementation to use the new standard API
2023-12-03 19:00:55 +01:00
070ed3de32
Device driver for file-based nonvolatile memory storage
2023-12-03 19:00:55 +01:00
578c4f425b
Added list of NVM areas to ttwrplus target
2023-12-03 19:00:55 +01:00
f94e6ce49e
Added list of NVM areas to Module17
2023-12-03 19:00:55 +01:00
ecd3602662
Added list of NVM areas to GDx targets
2023-12-03 19:00:55 +01:00
72c8b8246b
Added list of NVM areas to MDx targets
2023-12-03 19:00:52 +01:00
faffbfb930
ttwrplus: updated flash memory partitions
2023-12-03 18:34:39 +01:00
09587ab6c8
Added wrapper to NVM device API for Zephyr flash API.
...
Wrapped Zephyr flash API calls for OpenRTX interface, added
additional settings specific to T-TWR Plus.
TG-553
2023-12-03 18:34:39 +01:00
d20f0e2c8d
Added implementation of the standard NVM device API to AT24Cx driver.
2023-12-03 18:34:39 +01:00
ab66054341
Added implementation of the standard NVM device API to W25Qx driver.
2023-12-03 18:34:39 +01:00
f125bbe9be
Refactored AT24Cx EEPROM driver and implemented memory write function
2023-12-03 18:34:39 +01:00
be07b8f73e
Refactoring of W25Qx driver
2023-12-03 18:34:39 +01:00
91c0965007
Module17: made M17 baseband output have correct DC bias and amplitude
...
Removed an old workaround for an hardware bug of Module17 rev 0.1b limiting
the output swing of baseband signal in newer hardware revisions.
Contribution by Mathis Schmieder DB9MAT.
2023-11-21 18:46:03 +01:00
75abbaa12c
Linux: using file-based driver for SOURCE_RTX input device
2023-11-12 12:35:21 +01:00
8040a012b4
Driver for file-based audio input device
2023-11-12 12:34:37 +01:00
6b34bf362d
Linux: declared an instance of Module17 calibration data to allow linking with Module17 UI code.
...
Declared the "mod17CalData" variable inside linux platform.c to make the symbol available
to the linker when building the linux emulator with the Module17 UI.
2023-11-05 18:33:12 +01:00
7dc2ca5524
Driver for random number generator peripheral
2023-11-02 18:36:07 +01:00
e362a80d45
Fixed truncation error in AT1846S setFrequency()
...
Fixed error in compuation of values for AT1846S frequency registers
causing the output frequency to have an effective resolution of 1kHz
instead of 62.5Hz.
2023-10-22 03:24:25 +02:00
b4c8fca767
Implemented uf2 image wrapping for T-TWR Plus
...
T-TWR Plus target now produces images in UF2 format.
This format is compatible with bootloaders such as tinyuf2, and future
releases of the hardware will come pre-flashed with tinyuf2, thus
flashing them will not requires any other dependency than the uf2 file
itself.
TG-553
2023-10-18 11:27:43 +02:00
95e79e871d
ttwrplus: Add emergency shutdown
...
Enabled 10 second long press emergency shutdown PMU function to be able
to reset the radio even when OpenRTX is freezed, without the need of
pulling out and back in the battery.
TG-553
2023-10-17 09:54:13 +02:00
4697be5ea6
Fix squelch behaviour on T-TWR Plus
...
On LILYGO T-TWR Plus the squelch was being controlled by AT1846s,
resulting in the squelch bar setting being completely ignored. Now we
are introducing the support for a new command of sa8x8-fw called
AT+AUDIO that controls the muting or unmuting of the speaker power
amplifier, enabling us to:
1. Disable AT1846s embedded squelch
2. Enable OpeRTX squelch
Also fixed a bug where the sa8x8-fw version was incorrectly checked.
AT+AUDIO requires sa8x8-fw version v1.3.0.r1, bumped version check in
OpenRTX.
TG-553
2023-10-17 09:54:09 +02:00
04d6d01a5c
Reduce encoder sensitivity on T-TWR Plus
...
Reduce encoder sensitivity on T-TWR Plus by dividing the pulse counter
input by two.
TG-553
2023-10-09 09:23:45 +02:00
e2ab831c27
Added 1750Hz squelch tone on MD-3x0 radios
2023-09-22 13:58:59 +02:00
06515e324a
Enabled 1750Hz squelch tone on GDx
2023-09-22 13:58:59 +02:00
77e0ad27a0
Added support for 1750Hz squelch tone, implemented squelch tone in UV-3x0 radio driver.
...
When pressing the Hash key and the PTT key in FM mode
a 1750 Hz tone is transmitted
2023-09-22 13:58:59 +02:00
e11c529807
Bump Zephyr to commit a4de2eb3d1756c
...
TODO: the include fixes can be probably refactored by including the
correct zephyr directories, as include/zephyr/posix/pthread.h should
already bringing in those header files.
TG-553
2023-09-20 21:16:43 +02:00
6f567cc38d
ttwrplus: implemented the platform_pwrButtonStatus() function.
...
The platform_pwrButtonStatus() function returns false (shutdown) in
case of a long press of the power button.
2023-09-20 21:16:43 +02:00
7619b9473b
ttwrplus: Slow down encoder input
...
Two ticks are needed to emit one KNOB_LEFT or KNOB_RIGHT event, thus
slowing down the rotary encoder input and making it more comfortable.
TG-553
2023-09-20 21:08:35 +02:00
fe027c440c
ttwrplus: enable volume control
...
Replaced KEY_F7 and KEY_F8 with KEY_VOLUP and KEY_VOLDOWN.
Remapped the T-TWR Plus volume up and down keys to those, fixing a bug
in the pmu key detection where the wrong active edge was selected.
Adapt soft volume code for the UV3x0 to control code in the T-TWR Plus
by acting on the AT1846s Rx gain.
For target T-TWR Plus bound long press of KEY_VOLDOWN to macro menu open.
Unbound KNOB_LEFT and KNOB_RIGHT to squelch control and bound
instead KEY_VOLUP and KEY_VOLDOWN.
TG-553
2023-09-20 21:08:35 +02:00
8aa9b0a18f
ttwrplus: enable macro menu usage
...
Enabled macro menu implementation without keyboard.
TG-553
2023-09-20 21:08:35 +02:00
6a17bb8483
ttwrplus: implemented radio band detection.
2023-09-20 21:08:35 +02:00
ad1beffcf3
ttwrplus: implemented PMU interrupts handling
...
TG-553
2023-09-20 21:08:35 +02:00
2dabacebd8
ttwrplus: Implement power control on SA8x8
...
Implemented power control in T-TWR Plus by using the embedded switch
(RADIO_PWR) that controls the H/L pin of the SA868.
TG-553
2023-09-20 21:08:35 +02:00
c276fc5a51
ttwrplus: moved all the SA8x8 code in a dedicated translation unit.
2023-09-20 21:08:35 +02:00
d935532fc4
ttwrplus: enable GPS
...
GPS was enabled using UART1 and Zephyr message queues.
UI is a bit crushed on the small 128x64 screen but hardware works as expected.
TG-553
2023-09-20 21:08:35 +02:00
eeb05bcc0f
ttwrplus: fix unstable baseband startup
...
A proper baseband reset is now issued at each startup. Now OpenRTX check
for SA868 responsiveness before proceeding with radio initialization,
eliminating unstable behaviour at boot.
TG-553
2023-09-20 21:08:35 +02:00
dc84908fbc
ttwrplus: enable TURBO mode on SA868S
...
Enabled AT+TURBO command on SA868 that switches the baud rate of the
serial communication from 9600 to 115200 to get a more responsive
baseband. Bumped up the required baseband firmware version to
v1.1.0.r20.
TG-553
2023-09-20 21:08:35 +02:00
15f5477ae0
ttwrplus: add battery voltage readout
...
Add battery voltage readout through the XPowersLib library.
TG-553
2023-09-20 21:08:35 +02:00
82218aabce
ttwrplus: enable macro menu
...
Modified keyboard mapping to enable macro menu, interface is still
broken as the T-TWR Plus is missing a keyboard.
Now the volume down key, mapped as the MONI button can be also used to
set the squelch level.
TG-553
2023-09-20 21:08:35 +02:00
4c035bbf16
ttwrplus: enable Tx capability
...
Enabled Tx capability on T-TWR Plus.
Since Tx requires the SA8x8 to disable the Rx stage, we check that at
least firmware v.1.1.0.r14 is present on the baseband, otherwise we
don't initialize the radio.
TG-553
2023-09-20 21:08:35 +02:00
4df315473f
ttwrplus: add RGB LED support
...
Implemented WS2812C support with Zephyr driver.
Hooked up the RGB control to the existing RED and GREEN LED support.
TG-553
2023-09-20 21:08:35 +02:00
c60f580396
ttwrplus: add support for SA868
...
Add support for initializing SA868 and querying its firmware version,
created a new instance of the AT1846S class that leverages the SA8x8
serial connection as an i2c implementation.
Rx works! In the sense that the RSSI bar behaves as expected, still no
audio.
This commit was contributed by edgetriggered.
TG-553
2023-09-20 21:08:35 +02:00
e05d09f0fe
ttwrplus: Set battery charging current to 500mAh to limit PMU heating and max. capacity to 80% to extend lifetime by 2.5x-3x
...
Reference article: https://batteryuniversity.com/article/bu-808-how-to-prolong-lithium-based-batteries
2023-09-20 21:08:35 +02:00
8e8daa78c8
ttwrplus: implement PMU support
...
Begin implementing PMU, now successfully read and write registers, need
to implement button functionality, battery voltage readout, charge
detection etc.
TG-553
2023-09-20 21:08:35 +02:00
df853c8527
ttwrplus: add support for keys using Zephyr bindings
...
Zephyr already provides button support based on gpios. We are mapping
Zephyr keycodes to OpenRTX therefore future targets will only need to
configure their devicetrees to have button support.
Rotary encoder readout leverages the hardware pulse counter. PTT in
this device is also bound to KEY_ESC, that matched the behaviour
observed in many commercial radios.
TG-553
2023-09-20 21:08:35 +02:00
9a445f3b31
Enable malloc on ESP32 BSP, specify ttwrplus battery type.
...
Mallocs now are working.
This radio sports a single cell Li-Po battery.
TG-553
2023-09-20 21:08:35 +02:00
0c27c9ce28
Enable Zephyr dynamic stack threads
...
Enable Zephyr dynamic stack posix threading, with stack pool of 4 and
stack size of 4096.
TG-553
2023-09-20 21:08:35 +02:00
1f1d20e120
Update T-TWR devicetree
...
Updated T-TWR devicetree to reflect changes in upstream Zephyr.
TG-553
2023-09-20 21:08:35 +02:00
67f6d56168
Display driver for ttwrplus
2023-09-20 21:08:35 +02:00
ebc5910015
Renamed "bcd2bin" utility to "bcdToBin" to avoid conflicting with Zephyr includes
2023-09-20 21:08:35 +02:00
7c2c61f948
Added Lilygo T-TWR Plus target, using stub drivers.
2023-09-20 21:08:35 +02:00
21a93911da
Added support for ESP32-S3 MCU using Zephyr RTOS
2023-09-20 21:08:35 +02:00
9d141b8f93
Fix emulator screenshot
2023-09-11 12:22:08 +02:00
5ea94ee1af
Improved management of FM audio volume on MD-UV3x0.
...
Fix #160 .
2023-09-08 16:14:11 +02:00
dd46a48cd1
Improved conversion law in MD-3x0 and MD-UV3x0 platform_getVolumeLevel().
...
Rewritten the conversion law from ADC measurement in mV and normalized
0-255 output, adding a linearization if the pseudo-logarithmic output
curve of the potentiometer.
Signed-off-by: Silvano Seva <silseva@fastwebnet.it>
2023-09-08 16:02:53 +02:00
8dc1cba1f7
Removed sources of old audio stream drivers, updated stub audio driver
2023-08-30 18:04:25 +02:00
cd936ea216
Audio devices table for linux and GDx targets
2023-08-30 18:04:25 +02:00
344aa46da7
Audio devices table for MDx
2023-08-30 18:04:25 +02:00
2b1d3236d3
Audio devices table for Module17
2023-08-30 18:04:25 +02:00
f56771734f
Audio device driver for STM32F4xx ADC peripheral
2023-08-30 18:04:25 +02:00
5aed3e3316
Audio device driver for STM32F4xx PWM-based 8-bit DAC emulation
2023-08-30 18:04:25 +02:00
efb5f22750
Audio device driver for STM32F4xx DAC peripheral
2023-08-30 18:04:24 +02:00
435f7a416d
Basic driver to configure STM32F4 timers as perioric update sources.
2023-08-30 18:04:24 +02:00
4d03d1535c
Added function to STM32F4 DMA stream driver returning its status (running or not).
2023-08-30 18:04:24 +02:00
2931a83303
Almost general purpose driver for peripheral <-> memory DMA streams on STM32F4xx
2023-08-30 18:04:24 +02:00
1011dd1081
Moved audio_stream.h from interfaces to core headers
2023-08-30 18:04:24 +02:00
4920921862
MD-UV3x0: fixed bug causing no FM rx after tx end. Fix #171
...
Thanks to turnrye and tarxvf for debugging and testing this.
2023-08-23 09:54:36 +02:00
c1a9db22b7
Made Brightness setting optional based on HW capabilities
2023-08-16 20:46:25 +02:00
6c12a326cc
Fixed a bug in STM32 flash driver causing data not being written to the internal flash.
...
Solves #133 .
2023-07-29 16:31:14 +02:00
4cd1fdfcf3
Moved gpio.h to peripherals
2023-07-21 19:27:14 +02:00
28122a3bf3
Moved gps.h to peripherals
2023-07-21 08:32:26 +02:00
dcafd07085
Created "peripherals" include folder for non-mandatory drivers, moved rtc.h to peripherals folder.
2023-07-21 08:23:41 +02:00
009930f914
Moved get/set of current time to platform interface API
2023-07-21 07:58:29 +02:00
b335aeb22c
Adding folder with stub drivers for the OpenRTX interface APIs.
...
Stub drivers provide a safe default implementation of the OpenRTX interface
APIs and can be used both as a starting point to implement the actual drivers
and to allow compiling binary images without needing to provide an actual
implementation first.
2023-07-18 23:08:49 +02:00
65dde770e7
Changed return type of cps_readBankData() from "int32_t" to "int".
...
Made the return type of cps_readBankData() consistent with the one of
the other CPS API functions.
2023-07-18 23:04:31 +02:00
a5b925e76f
Small code cleanup in MD-UV3x0 HR_C6000 driver, temporary workaround to fix #129
2023-07-14 18:12:31 +02:00
8019b29947
Moved the setBacklightLevel() API function from platform.h to display.h
2023-07-14 12:26:47 +02:00
163a3df607
Refactored MDx backlight driver
2023-07-14 12:26:47 +02:00
Silvano Seva
Morgan Diepart
Derecho
marco
edgetriggered
Niccolò Izzo
Federico Amedeo Izzo
tarxvf
k5jae