21895ae304
ttwrplus: disable Tx in menus
...
As T-TWR Plus reuses the PTT as a back button, thus we need to disable
PTT in menus. Also enforce rx_only logic from CPS.
TG-553
2023-09-20 21:16:40 +02:00
fe027c440c
ttwrplus: enable volume control
...
Replaced KEY_F7 and KEY_F8 with KEY_VOLUP and KEY_VOLDOWN.
Remapped the T-TWR Plus volume up and down keys to those, fixing a bug
in the pmu key detection where the wrong active edge was selected.
Adapt soft volume code for the UV3x0 to control code in the T-TWR Plus
by acting on the AT1846s Rx gain.
For target T-TWR Plus bound long press of KEY_VOLDOWN to macro menu open.
Unbound KNOB_LEFT and KNOB_RIGHT to squelch control and bound
instead KEY_VOLUP and KEY_VOLDOWN.
TG-553
2023-09-20 21:08:35 +02:00
de3b319518
ttwrplus: added SA868 firmware version to info menu
2023-09-20 21:08:35 +02:00
a72f8387ad
ttwrplus: disable low battery warning
...
T-TWR Plus appears to have sever voltage drops during normal operation,
therefore we cannot use OpenRTX's low voltage warning screen on this
radio.
TG-553
2023-09-20 21:08:35 +02:00
ad1beffcf3
ttwrplus: implemented PMU interrupts handling
...
TG-553
2023-09-20 21:08:35 +02:00
024c7ffe3a
ttwrplus: fix sporadic missing TX
...
The bug was due to an uninitialized memory being used to configure the
RTX thread, that disabled Tx in a random way by randomly set the
txDisable field.
TG-553
2023-09-20 21:08:35 +02:00
0c27c9ce28
Enable Zephyr dynamic stack threads
...
Enable Zephyr dynamic stack posix threading, with stack pool of 4 and
stack size of 4096.
TG-553
2023-09-20 21:08:35 +02:00
dd13732343
Fix some compilation warnings generated by xtensa-espressif-gcc
2023-09-20 21:08:35 +02:00
ebc5910015
Renamed "bcd2bin" utility to "bcdToBin" to avoid conflicting with Zephyr includes
2023-09-20 21:08:35 +02:00
7ce3a8a605
Fix compilation error caused by voiceprompts data section definitions
2023-09-20 21:08:35 +02:00
467ad6bd7a
Fix regression in memory mode
...
Show frequency in memory mode when not receiving M17
2023-09-17 13:00:12 +02:00
1a7d62fb42
Add UI and check for CAN on RX
2023-09-16 19:14:17 +02:00
f425a4c740
Fix M17 Call Info flickering during reception
2023-09-15 19:41:48 +02:00
c49ae03d01
Audio stream: fixed missing NULL pointer check in audio device driver selection.
2023-09-13 22:26:41 +02:00
8fe9837035
Implemented rxSquelchOpen() function for M17 opmode handler, returning true in case of valid stream data.
2023-09-12 17:47:49 +02:00
0adab74255
M17: workaround to avoid UI glitches when a new dst callsign is set.
...
When a new dst callsign is set, the rtx configuration data structure is
updated and this may trigger false setting of the lsfOk variable to true,
causing the M17 info screen to appear for a very small, but noticeable,
amount of time.
2023-09-12 17:47:49 +02:00
22afe0ecde
Port changes for M17 Call Info to module17
2023-09-12 17:47:49 +02:00
7a67768c8d
Show M17 stream information on receive
2023-09-12 17:47:49 +02:00
dc0114e7e2
Retrieve M17 source, destination and extended callsign data from LSF
2023-09-12 17:47:49 +02:00
a0f5d55cc1
Add M17 stream information to rtxStatus struct
2023-09-12 17:47:49 +02:00
74f7912b4c
Fix M17 callsign decoder sometimes causing crashes
2023-09-12 17:47:49 +02:00
3860894bff
Implement macro menu without keyboard
...
Adapt UI for radios that do not have a keyboard, add macro menu UI code
that can only use KEY_ENTER and KEY_UP, KEY_DOWN.
TG-553
2023-09-10 12:12:13 +02:00
5ea94ee1af
Improved management of FM audio volume on MD-UV3x0.
...
Fix #160 .
2023-09-08 16:14:11 +02:00
d7578c4441
Refactor ui sizes
...
This changes line 3 to line 3 large and adds
two new lines, line 3 and line 4, similar to
line 1 and line 2
2023-09-04 15:12:18 +02:00
6dd0a718e0
Fixed bug in M17 opmode handler causing missing audio output
2023-08-30 18:04:25 +02:00
c9cd620530
Audio codec: added function returning the codec's current operational status
2023-08-30 18:04:25 +02:00
fc5e3b0bce
Audio stream: cleanup dead streams while searching for an empty slot
2023-08-30 18:04:25 +02:00
e610979ac7
Codec2: second round of refactoring and implemented proper access contention in codec_startEncode()
2023-08-30 18:04:25 +02:00
5b3e136127
Audio codec: using a single condition variable for queue wait management.
2023-08-30 18:04:25 +02:00
dd118d0a87
Adapted voice prompt and M17 code to new codec2 API
2023-08-30 18:04:25 +02:00
94fdd1090b
Refactoring and improvement of codec2 module
2023-08-30 18:04:25 +02:00
7d90d15a5f
Adapt code to the new audio stream API.
2023-08-30 18:04:25 +02:00
24208db609
New unified audio stream manager
2023-08-30 18:04:25 +02:00
adf88611f4
Changed codec_startEncode() and codec_startDecode() input parameter from an audio source/sink to an audio path
2023-08-30 18:04:25 +02:00
60b771b375
Added function to get all the informations of a given audio path
2023-08-30 18:04:25 +02:00
1011dd1081
Moved audio_stream.h from interfaces to core headers
2023-08-30 18:04:24 +02:00
7b64fca573
M17: change BROADCAST to ALL for decode callsign
2023-08-28 10:31:09 +02:00
f40ecc60db
M17: change decode callsign x to space
2023-08-28 10:30:51 +02:00
278d7850c7
M17: add data structures for GNSS and extended callsign metadata.
2023-08-28 10:25:46 +02:00
ec57e74bc6
feat(ui): add tooling to generate symbols, add GPS status icon and macro latch icon to the macro menu
...
Ref https://github.com/OpenRTX/OpenRTX/issues/161
2023-08-24 09:32:01 +02:00
a3c7df2b3e
Remove unused latch timer functions
2023-08-17 16:58:22 +02:00
8399dcd3a3
Change macro latching behavior
...
Latch macro menu when macro button is long pressed
Unlatch macro menu when macro button is pressed again
2023-08-17 16:57:14 +02:00
c1a9db22b7
Made Brightness setting optional based on HW capabilities
2023-08-16 20:46:25 +02:00
60735822db
Align Macro menu fm and M17
2023-07-21 19:27:20 +02:00
28122a3bf3
Moved gps.h to peripherals
2023-07-21 08:32:26 +02:00
009930f914
Moved get/set of current time to platform interface API
2023-07-21 07:58:29 +02:00
498f959798
Removed CPS flash backup and restore (actually unused) and hidden its UI menu entry
...
CPS flash backup and restore will be implemented via rtxlink/FMP, removed
current implementation which was never actually used. Code for backup and
restore UI menu entry kept for now.
2023-07-20 07:00:54 +02:00
8019b29947
Moved the setBacklightLevel() API function from platform.h to display.h
2023-07-14 12:26:47 +02:00
313e9615a6
Removed platform_getCalibrationData() function because of limited usefulness.
...
Given that each radio driver loads its calibration data when initializing
and that the radio driver is strongly platform-specific, there is no strong
need for an intermediate redirection layer through the platform API.
2023-07-14 12:26:39 +02:00
ec62bda31a
Fix CTCSS tone not correctly set when decreasing
2023-06-30 10:59:27 +02:00
e5b3ea1bed
Set default opmode to M17 in cps_getDefaultChannel() when compiling for Module17
2023-06-15 08:21:38 +02:00
f3f36fc2ae
Module17: quick and (very) dirty implementation of shutdown menu for hardware rev 0.1e
2023-06-15 08:16:53 +02:00
5c3e8fed80
Module17: reorganized the "info" menu entry, removed the unused fields
2023-06-14 21:51:31 +02:00
1afd868d64
Renamed "lcd_type" field of hardare info struct to "hw_version"
2023-06-14 21:30:52 +02:00
4ee4cb656d
Check if in M17 mode before entering destination callsign edit
2023-06-13 09:02:50 +02:00
cadec3dfd4
Default UI: implemented setting of M17 CAN
2023-05-29 22:12:40 +02:00
2f0d56a8e0
Moved M17 destination callsign directly inside radio state data structure
2023-05-29 22:12:40 +02:00
423183700c
Moved M17 CAN to settings
2023-05-29 22:12:40 +02:00
feaab4a965
Module17 UI: fixed a couple of compiler warnings and implemented reset to defaults of settings.
2023-05-29 22:12:40 +02:00
f038603bed
Module17 UI: small improvements to callsign input
2023-05-29 22:12:40 +02:00
40b82e3169
Module17 UI: using only left/right button to change all the numeric values
2023-05-29 22:12:40 +02:00
e5d6d8ebde
Module17 UI: cleaned up dead code of unused menu entries
2023-05-29 22:12:40 +02:00
f42b9d2cda
Implemented transmission of user-configured M17 channel access number
2023-05-29 22:12:40 +02:00
fb8e3412c5
Implemented change of M17 baseband signal phase according to user settings for both TX and RX in Module17
2023-05-29 22:12:40 +02:00
e93b461beb
Added phase inversion setting to M17 modulator
2023-05-29 22:12:40 +02:00
adc916dbca
Added CAN setting
2023-05-29 22:12:40 +02:00
cddf8e1c1f
Save contrast settings on Module 17
2023-05-29 22:12:40 +02:00
89aedef3ae
Implemented non-volatile memory for settings on Module 17
2023-05-29 22:12:40 +02:00
3f849bd8a1
Module17 UI: call sign input using arrows
2023-05-29 22:12:40 +02:00
bd8f0d70c7
Added RX/TX inversion and mic gain setting on Module 17 UI
2023-05-29 22:12:40 +02:00
f32255c258
Implemented softpot settings UI for Module 17
2023-05-29 22:12:40 +02:00
22e9d8ce48
Module 17 UI: layout and main screen
2023-05-29 22:12:40 +02:00
d8c4ba4420
Base sources for Module 17 UI
2023-05-29 22:12:40 +02:00
76ded06751
Split UI sources in a default one for the radios and the Module17 one.
2023-05-29 22:12:40 +02:00
7ce72d8325
Fix default channel index
...
it should be 0 instead of 1
2023-05-29 08:49:04 +02:00
4a3bc93fa4
Always send an M17 EOT frame as the last frame before terminating baseband output
2023-03-12 16:27:31 +01:00
a89a7523cb
Updated year in copyright headers
2023-02-08 16:33:02 +01:00
ae8bba88b6
Updated voice prompt for UTC timezone to support also half hour values, thanks to Joe VK7JS.
2022-10-31 18:04:08 +01:00
ce1dc202ae
Added support for half-hour timezones, moved datetime_t struct fields from bitfields to full 8-bit variables, added function to adjust the off-range fields of a datetime_t struct.
2022-10-31 11:41:54 +01:00
f26afc42e5
Small reorganization and cleanup of splash screen code, fixed bug causing audio path for voice prompts never being released at vp end
2022-10-31 08:41:31 +01:00
d5d49fbbb2
Refactored to decouple vp_init from speaking of splash screen.
2022-10-31 08:41:31 +01:00
16d750c55c
Excluded announcement of time and date settings for devices without RTC
2022-10-31 08:41:31 +01:00
438c224a2a
Fixed announcement of initial digit when entering rx freq in VFO mode. It once worked but somehow got clobbered along the way.
2022-10-31 08:41:31 +01:00
dd30c899df
Added a 50ms startup delay to voiceprompts. This provides a workaround to fix cracking sounds when changing rtx parameters on MD-UV3x0.
2022-10-31 08:41:31 +01:00
f24699f14e
Fixed bug in M17 demodulator causing it to sometimes take more than 20ms to process a block of baseband samples when, in unlocked state, a valid syncword is searched.
2022-10-31 08:41:31 +01:00
c6a40a9625
Ensure proper syncronization between codec2 decode thread and output stream when the former is started
2022-10-31 08:41:31 +01:00
0692bea269
Partial fix for speaker pop when a voiceprompt begins
2022-10-31 08:41:31 +01:00
5ee3a2e9f0
Reorganised codec_pushFrame and codec_popFrame functions for true non-blocking behaviour
2022-10-31 08:41:31 +01:00
9d021b7557
Fixed bug in M17 modulator and demodulator making them not releasing their audio paths on termination thus locking up the thread on M17 mode re-entering.
2022-10-31 08:41:31 +01:00
12932db37c
Refinement to last checkin: only clear function latch without beep for PTT, not for open squelch.
2022-10-31 08:41:31 +01:00
f61313638f
Cancel function key latch if ptt is pressed (without playing the latch off beep).
2022-10-31 08:41:31 +01:00
793a76d1ea
When PTT is pressed, stop any voice prompt or beep in process.
2022-10-31 08:41:13 +01:00
f9228ec23c
Halved the additional output gain for MD3x0 radios inside codec2 module to avoid sound distortion when voice prompts are played.
2022-10-28 09:47:47 +02:00
71a15c2cfb
Fixed bug in voice prompts audio path management causing no audio output in case of rapid key sequences. Improved managment of audio path release in voice prompts module.
2022-10-28 09:47:47 +02:00
2c1401de86
Moved voiceprompts audio management to audio path system
2022-10-28 09:47:47 +02:00
21481072e7
Moved audio management in M17 opmode handler to audio path system
2022-10-28 09:47:47 +02:00
edf864337a
Moved audio management in FM opmode handler to audio path system
2022-10-28 09:47:47 +02:00
25caffde6b
Linked audio path manager with low-level interface API to setup and release the audio paths. Minor refactoring of audio path manager code.
2022-10-28 09:47:47 +02:00
6d9ad2b947
Implementation of audio path manager
2022-10-28 09:47:47 +02:00
ec6519425c
Added call to vp_announceCTCSS to macro moni+2 branch because increasesto code were not speaking, only decreases.
2022-10-28 09:47:47 +02:00
5fb11322ac
Code cleanup and refactoring of voice prompts code
2022-10-28 09:47:47 +02:00
c7c9c3afc5
Fixed issue of m17 destination not being spoken in summary (long hold f1) if set to broadcast.
2022-10-28 09:47:47 +02:00
7cc287643e
Added Broadcast to string table for use with voice prompts. Cleaned up hash key announcement.
2022-10-28 09:47:43 +02:00
3ea4431b35
Added support for the speaking of callsign when you hit hash key.
...
Fixed issue of callsign and M17 settings strings being in the wrong order in the string table causing the voice prompts to be switched.
2022-10-28 08:30:47 +02:00
c2f349c93d
More improvements to auto GPS screen readout
...
Read fix quality and type changes.
Read satellite count changes.
Reduced minimum time between readouts to 8 seconds.
say km/h instead of kmh for speed.
2022-10-28 08:30:47 +02:00
cf45f7ee81
Fixed missing gps updates due to recording an update even when one wasn't detected, this meant countdown would restart errantly.
2022-10-28 08:30:47 +02:00
dbc86ea392
Give leeway for nw/ne/sw/se within a few degrees like n/e/s/w.
2022-10-28 08:30:47 +02:00
8c9f034b93
Adjusted sensitivity of auto announcement for GPS data. Now only announce for altitude changes of at least 5m, speed changes of at least 1 KM/h and direction changes of at least 1 degree.
2022-10-28 08:30:47 +02:00
7cc0c6455c
Now better handle directions, and speak prior to other info as most important.
...
Handle 8 cardinal points north, east, south, west, north east, south east, south west and north west.
2022-10-28 08:30:47 +02:00
4ba9b3ec34
Fixed memory overrun caused by buffer being too small.
...
Also fixed satellite count which got broken when I changed the GPS info flags to add more.
2022-10-28 08:30:47 +02:00
fbc4e380b3
Moved latitude and longitude to after direction in announcement because these are less meaningful than the other parameters.
2022-10-28 08:30:47 +02:00
f1639159bf
fixed issue of auto announcement clobbering manual request for summary.
...
Fixed a couple of issues with direction announcement.
2022-10-28 08:30:47 +02:00
4edef678c1
fixed south and west.
2022-10-28 08:30:47 +02:00
4e1689df51
Cleaned up GPS direction info so we say north, east, south, west when the tmg is within a close enough range.
2022-10-28 08:30:47 +02:00
5829df6dd3
Now read speed, altitude and direction changes on the GPS screen automatically with a forced minimum of 10 seconds between readings to avoid a bit of hysterisis .
...
Can still get full summary on long hold f1.
2022-10-28 08:30:47 +02:00
3ba094f633
Minor cleanup of beep code.
2022-10-28 08:30:47 +02:00
104f18d9e9
Added vp_beepSeries to play a melody.
...
Now play melody on power up if vp level set to Beep.
2022-10-28 08:30:47 +02:00
dc285ab023
Moved beep definitions into header beeps.h.
2022-10-28 08:30:47 +02:00
d8fa0465fb
Fixed following bug:
...
1. hit enter to go to banks menu.
2. hit escape.
3. hit enter again and radio does not announce banks menu because it was the last menu active.
Now reset the menu tracking variables on Escape.
2022-10-28 08:30:47 +02:00
da7dfe63b2
Avoid calling beep if we know the voice will announce something since it will be
...
canceled and most likely generate an unwanted click.
2022-10-28 08:30:47 +02:00
91d19e809e
Fixed issue of menus not reading at vp level 1.
2022-10-28 08:30:47 +02:00
eb89f5a55a
Now play generic beep on any key press as well as different tones when navigating the menu, when menu item wraps, and when function key latches and unlatches if voice prompt level is set to beep.
2022-10-28 08:30:47 +02:00
a1e302b19d
Got beeps working so long as you don't have ctcss set.
...
Reduced durations to sensible values.
2022-10-28 08:30:47 +02:00
3c20a5282e
Fixed nasty popping between every voice prompt and after every silence.
...
When retrieving the codec2 data, ensure it is an exact multiple of codec2 frames and always discard the very last frame.
2022-10-28 08:30:47 +02:00
80f6fe2289
Stopping audio codec at the and of each voice prompt
2022-10-28 08:30:47 +02:00
0298aa897b
Implemented beeps on MD-UV3x0 platform driver.
2022-10-28 08:30:47 +02:00
32fd910e64
Fixed warnings.
2022-10-28 08:30:47 +02:00
70ba324ef3
Fixed menu announcements so that menu item names are always spoken.
2022-10-28 08:30:47 +02:00
6a56fe3d3a
Fixed satellite count readout.
2022-10-28 08:30:47 +02:00
a71a06c57a
1. Renamed beepTick to beep_tick for consistency.
...
2. Made beep_tick static.
3. call beep_tick from top of vp_tick because in its prior location it might
not actually be called.
2022-10-28 08:30:47 +02:00
a081964ac8
Fixed Backup and Restore menus as follows:
...
1. Fixed issue of voice not reading backup or restore messages but instead
stuttering indefinitely.
2. Can now press cancel to exit the menu so long as you haven't pressed PTT to
start the process.
2022-10-28 08:30:47 +02:00
f8bfc7fb13
Added mechanism for specifying exactly what is read in the summary.
2022-10-28 08:30:47 +02:00
495b721231
Fixed setting of CTCSS and tone so that one can rapidly change tone without hearing the word "tone", "receive tone," "transmit tone" etc prior to each tone value.
2022-10-28 08:30:47 +02:00
d622080cfe
Do a better job of determining when to say Menu.
...
In info screen, avoid very rapid announcements of battery fluctuations.
For same menu name, only read value changes once per second for automatic reading.
2022-10-28 08:30:47 +02:00
c9ce41a999
Initial beep implementation.
...
Function latch will play high beep when latched and low beep when latch times out.
Menus will play a high beep when you arrow through them and a low beep when you reach the first item.
All keys should play a generic beep sound but this has not been implemented yet.
2022-10-28 08:30:46 +02:00
95b7707d87
Implemented speech feedback for setting UTC timezone.
...
Added speaking of negative sign for vp_queueInteger (plus is assumed if not negative).
2022-10-28 08:30:46 +02:00
9a250ec994
Added speech feedback to settings/display/timer menu.
2022-10-28 08:30:46 +02:00
0138d843b1
Improved time/date entry:
...
1. Now give format as dd/mm/yy before date and hh:mm before time.
2. Say the slash immediately after the 2nd and 4th digits are entered in the date and the colon immediately after the 2nd digit of the time.
3. Removed speaking of the 2nd colon in the time since seconds input is disallowed.
2022-10-28 08:30:46 +02:00
e5de5b96a3
Fixed announcement of power level both in settings menu and channel summary
2022-10-28 08:30:46 +02:00
0452bd0f10
Added voice feedback for setting the time and date.
2022-10-28 08:30:46 +02:00
ac7a2b94a9
Adjusted vp_anounceBuffer to distinguish between a callsign buffer and a regular name buffer.
2022-10-28 08:30:46 +02:00
a1d782b16c
Fixed backspacing text input so that it reads the char backspaced correctly.
2022-10-28 08:30:46 +02:00
11132e4949
Speak original callsign if escape is pressed to cancel edit from m17settings edit mode.
2022-10-28 08:30:46 +02:00
c0eba3866e
Added voice feedback for the M17 Settings Menu:
...
1. Added vp_announceBuffer to speak a prompt, edit mode and string buffer.
2. Added logic to the vp_announceScreen for m17Settings read-only mode.
3. Added logic for handling edit mode.
4. Removed vpCaps flag from several places because it is irrelevant when input only supports caps.
2022-10-28 08:30:46 +02:00
579ce7baa5
Removed the word "banks" from channel summary since name of bank or "all channels" is sufficient by itself.
2022-10-28 08:30:46 +02:00
5ed0121780
Fixed announcement of channel number/name in summary and when changing channel.
2022-10-28 08:30:46 +02:00
30e8671044
If there is no GPS fix, do not announce lat, long, ...
2022-10-28 08:30:46 +02:00
9f52c98c2f
Removed unnecessary trailing zeros from lat/long announcement.
2022-10-28 08:30:46 +02:00
2139f5e391
Refactored to add generic function for speaking int settings. Made brightness and contrast prompt use this.
2022-10-28 08:30:46 +02:00
04e7f044ff
Added announcement of Brightness when changing from the Settings/Display menu.
2022-10-28 08:30:46 +02:00
Niccolò Izzo
Silvano Seva
Marco
Ryan Turner
k5jae
Mathis Schmieder
Wojciech Kaczmarski
vk7js