GD77 and DM-1801 already have an hardware low-pass filter on the battery measurement
probe which causes the low battery protection to trigger at boot if the digital low
pass filter is also used. Given that the hardware one is good enough for our purposes,
the digital filter is now excluded.
Provides a fix for #221
The "revisions since last tag" version field is now accurately named and no longer checked. Extra parentheses also added to reduce compiler warnings.
Fix#217
Append the sources of the main entrypoint only when defining the build
targets for the executables. This avoids having the symbol for main()
defined twice when building the unit tests.
Removed an old workaround for an hardware bug of Module17 rev 0.1b limiting
the output swing of baseband signal in newer hardware revisions.
Contribution by Mathis Schmieder DB9MAT.
Declared the "mod17CalData" variable inside linux platform.c to make the symbol available
to the linker when building the linux emulator with the Module17 UI.
Fixed error in compuation of values for AT1846S frequency registers
causing the output frequency to have an effective resolution of 1kHz
instead of 62.5Hz.
T-TWR Plus target now produces images in UF2 format.
This format is compatible with bootloaders such as tinyuf2, and future
releases of the hardware will come pre-flashed with tinyuf2, thus
flashing them will not requires any other dependency than the uf2 file
itself.
TG-553
Enabled 10 second long press emergency shutdown PMU function to be able
to reset the radio even when OpenRTX is freezed, without the need of
pulling out and back in the battery.
TG-553
On LILYGO T-TWR Plus the squelch was being controlled by AT1846s,
resulting in the squelch bar setting being completely ignored. Now we
are introducing the support for a new command of sa8x8-fw called
AT+AUDIO that controls the muting or unmuting of the speaker power
amplifier, enabling us to:
1. Disable AT1846s embedded squelch
2. Enable OpeRTX squelch
Also fixed a bug where the sa8x8-fw version was incorrectly checked.
AT+AUDIO requires sa8x8-fw version v1.3.0.r1, bumped version check in
OpenRTX.
TG-553