1. Fixed issue of voice not reading backup or restore messages but instead
stuttering indefinitely.
2. Can now press cancel to exit the menu so long as you haven't pressed PTT to
start the process.
In info screen, avoid very rapid announcements of battery fluctuations.
For same menu name, only read value changes once per second for automatic reading.
Function latch will play high beep when latched and low beep when latch times out.
Menus will play a high beep when you arrow through them and a low beep when you reach the first item.
All keys should play a generic beep sound but this has not been implemented yet.
1. Now give format as dd/mm/yy before date and hh:mm before time.
2. Say the slash immediately after the 2nd and 4th digits are entered in the date and the colon immediately after the 2nd digit of the time.
3. Removed speaking of the 2nd colon in the time since seconds input is disallowed.
1. Added vp_announceBuffer to speak a prompt, edit mode and string buffer.
2. Added logic to the vp_announceScreen for m17Settings read-only mode.
3. Added logic for handling edit mode.
4. Removed vpCaps flag from several places because it is irrelevant when input only supports caps.
Fixed following voice prompt bugs:
1. Now say OpenRTX when powering on if vp enabled to let user know radio is on.
2. When switching back to VFO or channel mode from menus, now anounce VFO info or channel info.
3. When entering first digit of frequency in VFO input mode, say it.
4. Refixed issue of concatenating menus rather than clearing menu.
1. If the moni key is long pressed by itself (no digit), function key latches.
2. It remains latched for 3 seconds.
3. If a subsequent key is pressed during this time, the timer is restarted at 3 seconds again, allowing the user to say increase the ctcss code while keeping the function latched.
4. If no key is pressed, the timer is allowed to lapse and the function unlatched.
Removed flag parameters from summary and GPSInfo,
hooked up the GPS info so that if the GPS screen is active,
long hold f1 will read the GPS summary and f1 will repeat the last
voice prompt like on the VFO and channel screens.
Implemented the three levels of verbosity, besides none and beep:
1. Low: menus will speak but frequency and channel changes will just beep.
2. Medium: everything will speak but extra descriptions are eliminated except where ambiguity might occur.
3. High: Like medium except extra descriptions are spoken unles rapidly keying through menus in which case only the value will be spoken.
Added calls to various voice prompt functions in the UI so that VFO is basically accessible.
1. When entering digits in VFO mode.
2. When digits exceed 3, point will be announced.
3. When user enters sufficient digits to move from RX field to TX field, or if user presses Enter to move to TX field.
4. When both rx and tx frequencies have been completed.
Began calling voice prompt utility functions from places such as:
1. arrowing up and down in VFO mode (read new frequencies)
2. up and down in memory mode: read new channel name.
3. up and down in VFO input mode: announce receive or transmit,
4. when starting to enter a frequency: announce receive and the first digit.
Remove DMR from macro menu until we actually support it.
Remove print of M17 source callsign
Bank and channel visualization is more compact to make room for
additional data on a single screen.
Refactor mode screen to fit all data into a single screen.
vk7js
Silvano Seva
Niccolò Izzo