84d9803f57
Module17: hide menu entries for soft potentiometers if hardware does not have them
2024-06-21 19:27:33 +02:00
4f2c461bf0
Module17: added detection of baseband soft potentiometers
...
Detects the presence of the soft potentiometers. Display the detected potentiometers in the info menu.
2024-06-21 19:26:32 +02:00
30e9311a20
Module17: added support for hardware revision 1.0
2024-06-21 19:26:31 +02:00
f833ace5ca
UI: fixed issue with overflowing text input buffer
2024-06-21 09:58:08 +02:00
65bc773a1f
UI: fixed issue on callsign's last character editing
...
When editing the callsign on a device with keypad, when entering the last
character the same key did not rotate through the possible values
2024-06-21 09:58:08 +02:00
d43dd57031
Module17 Fixed Baseband tuning potentiometer setting
2024-04-26 21:20:08 +02:00
70f0ce45d3
GPS: using 16-bit integers for course over ground
2024-04-10 19:12:34 +02:00
a17ad80f10
GPS: using 16-bit integers for altitude and speed
2024-04-10 19:12:34 +02:00
e4a62f30ee
GPS: using fixed-point 32-bit value for latitude and longitude
2024-04-10 19:12:34 +02:00
71b35985ce
UI: added string table for Spanish language
2024-03-19 18:26:38 +01:00
67cad97b19
UI: fixed missing leading zeroes in VFO frequency visualization
...
Fix #255
2024-03-15 13:57:33 +01:00
bf97bcb011
Module17 UI: cleaned up dead code
2024-03-13 08:37:04 +01:00
94b9cd46b6
Module17 UI: code refactoring pass
2024-03-13 08:37:04 +01:00
8550e4f7a6
Module17: renamed calibration fields for TX/RX baseband inversion
2024-03-13 08:37:04 +01:00
ed92d81543
Module17: implemented configurable logic levels for PTT in/out
...
See #248
2024-03-13 08:37:04 +01:00
9c2bec9727
Ensure RSSI is int32
...
This will fix the RSSI display in the info section
2024-03-02 09:21:07 +01:00
ce8e758348
Fix compilation warning during mduv3x0 build
2024-02-11 18:06:15 +01:00
02bcec0bd4
Fix compilation warnings during linux build
2024-02-11 18:06:15 +01:00
6c8eaf7073
Module17: removed backlight timer
2024-02-06 21:11:46 +01:00
fdd08d4bcb
Module17: removed screen contrast setting, added screen brightness setting
...
Module17 uses an OLED display, which does not have contrast regulation. The
contrast control register, however, allows to change the brightness of the
display.
2024-02-06 21:11:41 +01:00
c533c47103
Default UI: optimized layout_t struct and _ui_calculateLayout() function
...
Small optimizations to layout management code, saved around 132 bytes of
.text space.
2024-02-06 19:19:47 +01:00
d8c0ab1c44
Dropped support for 20kHz bandwidth
...
Dropped support for 20kHz bandwith in rtx code and radio drivers. This option
is supported only by MDx radios and so far is not being used at all.
2024-02-06 19:19:47 +01:00
1791e70eef
Using newlib-specific sniprintf in place of snprintf
...
Using the newlib's printing functions without floating point support in order
to reduce the overall binary size. This allows to free up around 15kB of space
in the .text section.
2024-02-06 19:19:44 +01:00
44385b3b25
Using signed 32-bit data type for RSSI instead of floating points
...
Switched to int32_t for RSSI representation to allow running the code also
on devices with limited resources. Defined a new ad-hoc type to still keep
the possibility of using floating points on more capable devices.
2024-02-01 11:07:20 +01:00
963f402f1b
Graphics: using uint8_t instead of float for squelch and volume levels
...
Modified type of drawSmeter() and drawSmeterLevel() input parameters from
float to uint8_t.
2024-02-01 11:07:20 +01:00
c0115c14b3
UI: removed use of floats when displaying VFO frequency, offset and step
2024-02-01 11:07:20 +01:00
cb7b605251
Removed use of floating points when printing/announcing CTCSS tone frequency
2024-02-01 11:07:20 +01:00
5b3929ef44
Moved from float to uint32_t for TX power, substituted dBm with mW in CPS channel struct
...
General code optimization allowing to reduce the overall binary size, especially
for devices without hardware floating point support. On the MD-380 (which has the
FPU) the .text size has been reduced of 4'928 bytes.
2024-02-01 11:07:20 +01:00
dc930f4a4b
Added CONFIG_M17 macro to enable M17 support on each target
2024-02-01 11:07:20 +01:00
e54234f968
Renamed UI_NO_KEYBOARD macro to CONFIG_UI_NO_KEYBOARD
2024-02-01 11:07:20 +01:00
8bc867beae
Using Kconfig-style #defines for GPS, RTC and knob type description
2024-02-01 11:07:20 +01:00
cc27cc28a4
Using Kconfig-style #defines for battery type description.
2024-02-01 11:07:20 +01:00
0f4290cdfe
Using Kconfig-style #defines for display parameters' description.
2024-02-01 11:07:20 +01:00
f771d4ec06
Improved indentation in _ui_drawMacroMenu()
2024-02-01 11:07:19 +01:00
c3f1ec0ea1
Improve the callsign input of module17 UI
...
This will change the bahavior of the left and right button in callsign input:
The right button will add a new character to the input starting at `A`.
The right button will stop at the maximum allowed length.
The left button will delete the current charater.
The left button will go back one character and make it editable again.
The left button will not do anything when only one character is displayed.
2024-01-31 08:45:30 +01:00
5ec0587c48
Added macro menu latching setting
2024-01-10 18:08:35 +01:00
b1fa154ad9
UI: renamed "Voice Prompts" menu to "Accessibility"
2024-01-10 18:06:48 +01:00
4a45ce0c16
Allow skipping keypad lock when only hash key is pressed
2024-01-09 14:14:49 +01:00
7987bd732f
Add button info for mod17 callsign entry
2023-12-31 17:18:50 +01:00
3a2bac3e7e
Fixed missing transmission of the 1750Hz tone when keypad is locked.
...
Fix #210
2023-12-12 19:05:52 +01:00
5a0f92e23d
Add a volume bar in the bottom over the other bars
...
This will fix #190
2023-11-25 19:08:38 +01:00
9433f8735a
Mod17: get last callsign if available
2023-10-28 11:58:25 +02:00
f43281e815
Display callsign on splash screen
2023-10-26 06:01:54 +02:00
1124c76b73
Added M17 destination to settings
...
# callsign in backed-up settings
2023-10-23 00:40:55 +02:00
744ad85799
Adapt Radio settings to UI_NO_KEYBOARD interface
...
Enabled the T-TWR Plus to use split frequency settings by adapting the
Settings->Radio menu to the UI_NO_KEYBOARD user interface.
TG-553
2023-10-16 21:50:03 +02:00
17d5be118e
Enable frequency offset input from radio menu
...
Adapted callsign input to create a frequency input menu, that was used
to enable the input of a frequency offset from the Settings->Radio menu.
2023-10-16 21:50:03 +02:00
5d3c6c825d
Add radio settings for frequency offset, direction, and frequency step.
...
Add customizable frequency_step in radio state.
Offset is not yet selectable from Settings->Radio but only with keypad
from the VFO screen.
2023-10-16 21:49:56 +02:00
7612044d91
VFO screen cleanup: removed unused options, introduced compressed frequency print and lock icon.
...
Contribution by tarxvf.
2023-10-16 21:47:01 +02:00
7e291fe6fd
Implement UI input lockout logic, toggled by macro menu key 9.
...
Contribution by tarxvf.
2023-10-16 21:46:37 +02:00
20b0c375aa
Change M17_orig to link and change callsign handling
...
This will swap the first extended callsign with the source callsign
if there is extended callsign data.
This allows to always store the true source in the M17_src variable
See #188
2023-10-13 09:58:34 +02:00
Silvano Seva
Morgan Diepart
marco
jpucheu
Derecho
Niccolò Izzo
tarxvf