15 lines
1019 B
Markdown
15 lines
1019 B
Markdown
# DIYFIXIO
|
|
Point of this repository is to document instructions for creating DIY clone of [omnifixio](https://omnifixo.com/).
|
|
|
|
Ideas as for now:
|
|
- Plate - use old 3d printing bed.
|
|
- magnets -
|
|
- bolt sleeves - https://pl.aliexpress.com/item/1005008554837674.html (probably M3)
|
|
- ball joint **ball** - https://pl.aliexpress.com/item/1005006472765824.html (thread probably M3, diameter?)
|
|
ball could be with threaded hole
|
|
ball could be with threaded through-hole that could be use to lock it into ring magnet from other side
|
|
so that when you pull on tool you won't leave magnet on the plate https://pl.aliexpress.com/item/1005008010721808.html
|
|
- ball joint **socket** - either [ring magnet](https://pl.aliexpress.com/item/1005010317034738.html) or ["screw through" magnet](https://pl.aliexpress.com/item/1005010016604682.html)
|
|
- the clamps just 3d printed or chearp aluminium flat bar used for half (or both) of it for electirc connection feature
|
|
- springs https://pl.aliexpress.com/item/1005005402716572.html
|