If the expected replica count had exceeded the amount of seeds already
synced with the following message would appear:
Not connected to any seeds for {rid}.
This is not true, since there are seeds that were already synced.
This is fixed by calculating the `synced` and `connected` nodes,
without the local peer in the set. This means that the check for
`synced.len() >= connected.len()` will get a hit and the function will
correctly return early.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
We cannot guarantee that the `rad sync status` will run before all the
nodes are synced.
Remove the call to `rad sync status` and explain that at least 1 of
the nodes will be synced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To allow `rad sync` to break early from the call to `announce`,
control flow is introduced for the callback.
In `rad sync`, the number of synced nodes is checked against the
`replicas` -- if specified -- and sends a `Break`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, the head of the opened patch would not be displayed, and
so the user could not tell what it was if any updates were applied.
Show the head for the opened revision. The below shows the difference
between before and after, respectively:
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) (8b0ea80) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When an alias cannot be found for an `Author` the DID can be repeated eg.
✓ accepted by z6MkkfM…jXVsVz5 z6MkkfM…jXVsVz5
To prevent this we output one of four cases:
* `(<alias>, (you))` -- the `Author` is the local peer and has an alias
* `(<did>, (you))` -- the `Author` is the local peer and has no alias
* `(<alias>, <did>)` -- the `Author` is another peer and has an alias
* `(<blank>, <did>)` -- the `Author` is another peer and has no alias
Notably, we output a blank `Label` when no alias was found.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow `rad patch edit` to take a `--revision` option which will edit
the description of the specified revision, rather than the root
revision.
If the flag is not specified, then the original behaviour of editing
the root revision's title and description is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a timeline of a patch be global and sorted by
timestamp, organise it via revisions. Each revision has an entry in
the timeline, sorted by timestamp. Under each revision, a series of
updates are inlined, also sorted by their timestamps. Currently, these
updates can either be reviews or merges.
For example:
```
├────────────────────────────────────────────────────────────────────────────┤
│ ● opened by fintohaps (you) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ ↑ updated to 5f2a123e3f2aa60f2e03815df283563495b73085 (a1c3c0f) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ └── ✓ merged by cloudhead (z6Mkt67…v4N1tRk) now │
╰────────────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's useful to be able to print out the Rust data of a Radicle defined
COB for debugging purposes, since the current CLI commands will only
show a subset of the data.
Add `--debug` flags to `rad patch show` and `rad issue show` that
print the data to stdout.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Prevent `rad patch update` to create an identical revision to any
other revision in the patch, rather than just the latest revision.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
By default, this command now:
* Follows the peer if not already followed
* Syncs refs of the peer, if it wasn't followed before
* Fetches refs into working copy
This functionality can be disabled via `--no-sync` and `--no-fetch`.
Add functionality for lising the remotes that are in the storage
repository, but a working copy remote has not yet been created for
them.
This functionality is included in the `rad remote` command since it
can be directly used for creating Git remotes using the same command,
i.e. `rad remote add`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
seeding` behaviour under `rad seed`. When an `<rid>` isn't
provided then the seeded repositories are listed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
following` behaviour under `rad follow`. When an `<nid>` isn't
provided then the followed nodes are listed.
This includes filtering by alias, when `--alias` is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shell out to `git`, avoiding using `git2`. This is to avoid an
issue where somewhere within the fetch there is an attempt to lookup a
`rad/sigrefs` object, which says that the object is missing. It is
suspected that this is due to the object being localised in the same
packfile as other objects we are fetching. Since the `rad/sigrefs`
object is never needed nor used in the working copy, this will always
result in the object missing. This seems to only be an issue with
`libgit2`/`git2` and not `git` itself.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
`Infallible` is a more appropriate type in comparsion to `()` for
comments that do not require a `CodeLocation`.
That is because if the type for `location` is `Option<()>`, this means
that `Some(())` can be constructed, however, we never intend to
construct that variant. On the other hand, `Infallible` can never be
constructed, and so, only `None` can be used.
This requires updates to some functions to use the generic `T` and
also handle the different kinds of `Comment`s -- `Infallible` and
`CodeLocation`.
X-Co-Authored-By: Fintan Halpenny <fintan.halpenny@gmail.com>
Allow some margin of error when sending multiple inventory announcements
at a time. Previously, they might end up with the same timestamp, so
only the first announcement would be processed by nodes. Now, we ensure
that the timestamp is updated.
The hint for updating a patch incorrectly printed:
git push rad -f HEAD:rad/patches/<patch id>
The remote, `rad`, is already specified so the the right hand side of
the refspec should only be `patches/<patch id>`.
Fix this by stripping the remote from the name of the branch in the
remote helper.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the CLI user to update a patch's base commit through the `rad
patch update` command.
There was check to see if the head of the branch was the same as the
head of the revision, which would result in the update being skipped.
This was adapted to check that the head *and* the base were the same.
A test was added in the examples to showcase this use.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When we perform updates to cobs we tend to want to sync those changes
to the network after. This patch automatically does this for
operations that perform updates to issues and patches.
Note that `--announce` becomes the default for the `rad patch`
command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's actually not such a great idea to sync on git-fetch and
git-ls-remote, as syncing is supposed to happen in the background
already, and if you want to force a sync, you can just call `rad sync`.
Previously, it would be annoying that when you called `rad sync` and
then `git fetch`, it would still attempt another sync, for example.
Moving forwards, it might make sense to call `git-fetch` on `rad sync`
(so the other way around), because `git-fetch` is free (it doesn't talk
to peers), and you almost always want your working copy up to date with
your storage.
In some cases, there's a chance for the patch to not have arrived
before trying to check it out in the `alice` repo.
Ensure that the patch is present by first running `rad sync -f`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
Previously we panicked if a revision wasn't found after an update. But
it can happen that the update goes through yet a concurrent update
prevents the revision from being valid.
To partially deal with this, we don't try to lookup the revision after
an update, we simply return the ID. This means a subsequent lookup can
fail, and the error can be handled there.
Fintan Halpenny
cloudhead
Sebastian Martinez
Fintan Halpenny