Symbols signaling status of a process and similar are duplicated in
three different crates. Also two different symbols to signal success are
used:
1. ✓ ( Check Mark, U+2713)
2. ✔ (Heavy Check Mark, U+2714)
Work against that by referring to `radicle-term` from the other crates.
When initializing the `radicle-node` process, see
`radicle-node/src/runtime.rs`, an attempt is made to read from a node
announcement file.
This file is never written, therefore all of these reads fail.
Even though this caching mechanism might make sense or might have made
sense at some point, it is dead code now, and therefore removed.
Also, the fact that the file name was defined in the `radicle` crate is
ugly.
Ensures that preferred seeds that are not synced are made part of the `to_sync`
set, and the Announcer is constructed without an error.
As well as this, ensure that the `synced` and `to_sync` sets do not overlap by
constructing the `to_sync` and removing any `synced` elements from it.
Making a note of that `Announcer::can_continue` might never be able to hit the
`Break` case. It could be defensive programming, so I'm going to leave it in for
the time being.
Adds a test case to show that the Announcer is allowed to mark an "unknown" node
as synced.
There may be a case where gossip reached a node that the current node was not
aware of. This should be allowed and should count towards the final replication
factor.
The `Announcer` logic was subtly different to the fetching logic, where the
preferred seeds need to be announced to *and* the replication factor had to be
reached.
This patch relaxes that constraint, and allows it to hit either targets before
exiting.
This also surfaced an issue with the with the `Progress` calculation, where
calculating the `unsynced` used the `synced` value to subtract. However, this
was not required because `to_sync` is mutated, so the value is simply
`to_sync.len()`. A test case was added to ensure this is correct by checking
that invariant that the total between synced and unsynced nodes always matches
the total of synced and unsynced progress.
The upgrade of the `radicle-crypto` crate was missed when upgrading
semver versions.
Unfortunately, since it is at the base of the dependency tree, all
crates that depend on it require an additional upgrade.
If one attempted to compile the test target for `radicle-node` by itself, it
would result in a compiler error – due to missing trait implementations that are
provided by `radicle-protocol/test`.
It would compile fine when `--all` is used due to cargo unifying feature sets,
so it went unnoticed until now.
This fixes the issue by adding `radicle-protocol` to the `dev-dependencies` and
enabling the `test` feature flag.
This is morally a revert of 70fb0d3fef
while additionally getting to compile
`crates/radicle-term/src/editor.rs` on Windows.
To get the changes that were made on top of the revert, check
git diff 70fb0d3fef~1 <this commit> -- crates/radicle-term/src/editor.rs
There were reports of the inquire editor being unrealiable.
Only the latest log was kept as `node.log.old`. Now, log files are
numbered (`node.log.1`, `node.log.2` and so on). Also `node.log` is now
a hard link to the current log file. `rad node stop` will delete
`node.log` (note that `node.log.x` stays intact) and `rad node start`
will delete `node.log` before it creates `node.log.y` in case the node
crashed.
Also, when running in foreground mode, now a log file is created. It
just contains the hint that the node was started in foreground mode,
just to avoid confusion.
The implementation is split into a sans I/O part as `struct LogRotator`,
while the I/O counterpart is captured by `struct LogRotatorFileSystem`.
The logic for computing canonical references conflated the semantics of
annotated and lighweight tags, yielding confusing/wrong results. The
main culprit was the call to `peel_to_commit` in
`impl ReadRepository for Repository`, peeling tag objects away.
To resolve this, we separate out quroum computation per object type: one
implementation for commits, and one for tags.
Also move move canonical error types and methods into their own
module to have a cleaner file structure for the main logic.
Capture the `BTreeMap<Oid, u8>` type into a `Votes` struct, with its own API.
We were getting the objects from the repository twice – once in `Canonical::new`
and once again in `ensure_commit_or_tag` – so the latter was removed.
Use an `enum CanonicalObject` to specify which object types the canonical
process supports.
During `converges`, separate commits and tags, and ensure that we are only
looking at objects of one type. Note, that Fintan think this is actually the
*wrong* place to do it because we already filter the objects – so we should
keep track of that information higher up the callstack.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
When we fail to get the info for the binary names of `radicle-node` and
`git-remote-rad`, we still mention the binary name which is usually a part of
their output.
After upgrading from Rust 1.85 to 1.88 in 586eefc, clippy started
warning about large error types. Box action to make
`radicle::cob::patch::Error` lighter.
Provide a default message that informs the user of the `(e)`, `(enter)`, and
`(esc)` functionality.
Unfortunately, it is not possible to provide any message that is better
customised to each case, due to `inquire` requiring a `'a` lifetime on all its
inputs – this rules out providing any kind of `String` input.
The first paramter of `Editor::new` can already be used to provide more
contextual information. The second parameter is left configurable, but for now
`Editor::HELP` is used everywhere.
To avoid that users on Windows have to explcitly set `HOME`, also accept
`USERPROFILE` which is considered equivalent.
To avoid repeating to join `.radicle`, split the logic up into two
phases. Also take care to provide a good error message, as this error is
fatal and user-facing.
The trait `radicle_ssh::agent::client::ClientStream` trait was
simplified, because `winpipe::WinStream` is so similar to
`std::os::unix::net::UnixStream` that we can just use the same
implementation for both platforms.
However, obtaining the process identifier of the SSH agent process is
not common on Windows, so we instead track the path that we used to
connect to the agent. This is also helpful on Unix. In some cases, the
path will even contain the process identifier. The path is printed by
`rad self`.
Errors are cleaned up, and error messages are improved.
Introducing the new enum `TerminalFile` to model which standard stream
stream the terminal uses allows us to remove the dependency on `libc`
which does not build on Windows.
`radicle-term` includes quite a lot of rather "low-level" logic to spawn
the preferred editor of the user. In particular, this logic is
platform-dependent and only works on Unix-like platforms.
Also, `radicle-term` already depends on `inquire` which features an
editor prompt. It is a cross-platform solution to spawn the editor.
This commit changes the implementation of `Editor` to be a wrapper of
`inquire::Editor`, keeping the interface mostly intact.
Downsides:
- We cannot edit a file "in place" this way, instead we have to read
it, as `inquire` only supports editing temporary files. This can also
be viewed as a benefit, as we lessen the risk of corruption of these
files.
- `inquire::Editor` contains borrows, so it is quite cumbersome to
extend it with a custom mechanism for looking up the preferred
editor. The lookup logic was kept, but needs to be invoked by the
caller. In the future we might consider just using the logic provided
by `inquire` or requesting a change to `inquire`.
- The prompt is a bit strange. It does not show the current state of
the output, see <https://github.com/mikaelmello/inquire/issues/280>
and <https://github.com/mikaelmello/inquire/pull/271>.
The `radicle-signals` crate only supports Unix, so using it prevents
`radicle-term` to build on Windows.
Of course, this means that non-Unix platforms will not support any
signal handling at all, but at least we can build.
Directory builder extensions are platform specific and only available on
Unix. Move their use into a conditionally compiled block, so that we can
build on Windows.
When using `rad init` the default branch for the project can be predetermined by
inspecting the working copy repository.
To improve the experience, it will first check `init.defaultBranch` in the Git
configuration file.
If it does not find this, it falls back to choosing the default head of the
repository at the time. This may be HEAD, and in this case it will error and
provide helpful information.
The repository may also not have any default head at the time, and this also
results in an error and hint.
Lorenz Leutgeb
Fintan Halpenny
Erik Kundt
Sebastian Martinez
Sekhat Temporus