The configuration of the fetch process was only achieved at the setup
of the of the node.
This limits the ability to pass configuration options to the fetch
worker while the node service is running.
This change introduces `radicle_protocol::fetcher::state::FetchConfig`
to allow configuration options to be kept track of. This includes the
previous `timeout` option, but now also includes the
`radicle_fetch::Config`.
The service now produces the `FetchConfig` and passes it through to
the fetch worker.
After feature levels are introduced to Signed References, and downgrade
attack protections are implemented, new errors are encountered when
reading Signed References that are in a downgraded state.
Such downgrade errors are recoverable by advancing history in a way that
restores the feature level that the history requires.
However, the implementation in `radicle-fetch` must be adjusted to not
abort fetching on downgraded histories, but rather inspect the error in
this case and decide whether continuing the fetching process would
actually help recover from the downgraded state.
The two cases are treated slightly differently for non-delegates and
delegates. Since delegates are crucial for evaluating repository
identity, also the fact that they cannot recover from a downgraded state
is logged at the "info" level.
Add a configuration knob `node.fetch.signedReferences.featureLevel.minimum` to
allow node operators to enforce more strict verification when fetching
Signed References.
In hopes of nudging users to upgrade, print a warning if older feature
levels are encountered. However, only do this for delegates, as these
are more critical for the repository, to not log too many warnings.
To prevent from inability to write sigrefs in case of a verification
error, swallow verification errors about the head commit, log, and
carry on writing.
Previously, trying to load `SignedRefs` for any given remote would
result in a fetch failure.
Teach the fetch to be more resilient by pruning remotes that result in
an error when loading `SignedRefs`, and add the error to the
validation failures.
Ensure that the public interface of signed references does not leak its
implementation details.
This allows the evolution of the interface in a safer manner, and does
not leak implementation details to the rest of the crate or any
dependents.
The previous code would convert the `remote` into a `Component` on
each iteration of the loop.
The conversion now happens outside of the loop and can be reused.
The previous resolution would favour one `Oid` over another, due to
the call to `Option::or`.
This was found to result in scenarios where an identity document being
advertised was older than the identity document that the fetching node
already has, and would not fetch namespaces by newly added delegates.
The resolution logic is updated to handle all cases for these `Oid`s,
and when they are both present, uses a commit graph check to see which
one is the latest.
An e2e test is added to check ensure behaviour works correctly.
Fixes [CVE-2026-0810].
The `gix` crates require updating due to the security vulnerability above.
They require updating together in lock-step so both `radicle-fetch`
and `radicle-oid` are affected.
`radicle-oid` handles the non-exhaustive nature of `ObjectId`.
`radicle-fetch` updates to the new API types, however, this comes with
some updates to the `ls_refs` protocol.
A regression is documented in [gitoxide issue 2429].
The regression highlighted that it is the duty of the caller to also
filter the outcome of ls-refs, and `ref-prefix` is simply an
optimisation.
The ls-refs code is refactored to better represent and handle this operation.
[CVE-2026-0810]: https://www.cve.org/CVERecord?id=CVE-2026-0810
[gitoxide issue 2429]: https://github.com/GitoxideLabs/gitoxide/issues/2429
Better represent the domain by introducing the `RefPrefix` type.
It captures the different `ref-prefix` values that can be used in the
`ls-refs` step of the protocol.
These are turned into their equivalent `ref-prefix` values using
`RefPrefix::into_bstring`.
This better connects the `ProtocolStage::ls_refs` method with the
`ls_refs::run` through the use of the `RefPrefix` type, rather than
any set of `BString` values.
The Git protocol specification states about `ls-refs`[^1]:
> ref-prefix <prefix>
> When specified, only references having a prefix matching one of
> the provided prefixes are displayed. Multiple instances may be
> given, in which case references matching any prefix will be
> shown. Note that this is purely for optimization; a server MAY
> show refs not matching the prefix if it chooses, and clients
> should filter the result themselves.
The `ref-prefix` arguments should not be relied on and post-filtering
after the ls-refs invocation should also be performed.
[^1]: https://git-scm.com/docs/protocol-v2#_ls_refs
Evaluate the use of `warn!` and `error!` logging in `radicle-fetch`.
The majority are downgraded to `debug!`, the rest either being
downgraded to `info!` or removed altogether.
Introduce the `radicle-core` crate for housing data types that are at
the core of the Radicle protocol. The initial data type being added is
`RepoId`. To make the crate as lightweight as possible many of
dependencies are optional and gated by feature flags.
The crate is marked as `no_std` even though it unconditionally depends
on `radicle-crypto`, which is *not* `no_std`. This is to invite
refactoring of `radicle-crypto` to `no_std` at a later time.
The message that is returned by `gix-transport` for I/O errors can be
unhelpful, since it does not provide the reason for what happened.
Instead, surface the error so that it provides more detail for logging.
Update the `gix` family of crates to avoid the vulnerability reported in
[CVE-2025-31130].
Since `gix-hash` is used in two places, its version definition was moved to the
top-level `Cargo.toml`. `cargo` warned that `default-features` not being defined
in the top-level could result in a future error, so that was carried along with
it. This did not affect the build of `radicle-fetch`.
[CVE-2025-31130]: https://www.cve.org/CVERecord?id=CVE-2025-31130
Make `git2` an *optional* dependency of `radicle-cob`, and refactor
`radicle` to depend on crates that in turn do not depend on `git2`
*non-optionally*
The main offending dependency of `radicle-cob` is `radicle-git-ext`
from the `radicle-git` workspace in repository
(rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) which *non-optionally* depends on
`git2`.
So, to achieve removal of this dependency:
1. The crate is refactored to depend on the new crates
`radicle-git-ref-format` `radicle-git-metadata`, and
`radicle-oid` introduced in the previous commits, instead of
`radicle-git-ext`.
2. Some code from the `radicle-git-ext` crate in the `radicle-git`
workspace in repository (rad:z6cFWeWpnZNHh9rUW8phgA3b5yGt) is
copied. See `crates/radicle-cob/src/backend/git/commit.rs`.
This cascades to `radicle` and its dependents.
Firstly, the there is an
`impl Deref<Target=git2::Oid> for radicle_git_ext::Oid`. This made
it very convenient to just deref to obtain the wrapped `git2::Oid`,
so there are many expressions of the shape `*oid` in `radicle` and
its dependents. However `radicle-oid` does not provide
`impl Deref<Target=git2::Oid> for radicle_oid::Oid`, as notably,
`Target` is an associated type, and not a type parameter, so an
implementation of `Deref` would tie the new `Oid` too tightly to a
particular implementation.
Instead, work with `impl From<radicle_oid::Oid> for git2::Oid`
(which can be enabled using the feature flag `radicle-oid/git2`).
This explains the changes from `*oid` to `oid.into()` at every
transition to "`git2` land".
Secondly, `radicle` and its dependents are refactored to also depend
on `radicle-git-ref-format` and (much less prominently)
`radicle-git-metadata` instead of `radicle-git-ext`
This is to avoid pulling in `git2` via these dependencies.
Thirdly, as the re-exports in `crates/radicle/src/git.rs` change,
they are at the same time also cleaned up. Notably, the types from
`radicle-git-ref-format` are re-exported under `fmt` only, not "twice".
While overall this obviously is very much a breaking change, these
changes should mostly amount to changing from `Deref` to `Into`, i.e.,
`*oid` → `oid.into()` and rewriting imports for `radicle::fmt`.
This is indicated by the mostly mechanical nature of the changes to
`crates/radicle-{cli,node,remote-helper}`.
Allow the fetch interface to accept anything that implements
`AsRef<Repository>`. This allows flexibility in the types that the `Handle` can
accept.
This change is motivated by wanting to introduce a type that is a temporary
repository that wraps a `Repository`.
The interface of the `Handle` has two methods: `Handle::repository` and
`Handle::repository_mut`. However, the calling logic would always access the
`Handle::repo` field.
This is cleaned up by making this field private, and using the
`Handle::repository` method instead. There were no calls to `repository_mut`,
and so the method was removed.
This function (and the helpers `ancestry` and `find_and_peel`) are
eagerly peeling to commits, leading to updates of tags that target the
same commit to be missed.
For example, there could be tag two tag objects with *different* OIDs
A and B, from *different* authors, using *different* tag names, signed
with *different* secret keys, and both pointing to *the same* commit C.
The implementation would consider A and B to be the same, just becuase
A and B both peel to C, skipping the update.
This is counterintuitive, and when combined with canonical references
can be quite confusing.
Change this to only reason about an ancestry if the two objects in
question really both are commits directly. Otherwise, treat cases where
no structure can be used as ancestry similarly to non-fast-forward
updates.
I was greeted by `rad patch redact` with
called `Result::unwrap()` on an `Err` value:
Error { code: None, message: Some("failed to convert") }
stack backtrace:
[…]
3: core::result::Result<T,E>::unwrap
at …/rust-1.88.0/lib/rustlib/src/rust/library/core/src/result.rs:1137:23
4: sqlite::cursor::Row::read
at …/index.crates.io-1949cf8c6b5b557f/sqlite-0.32.0/src/cursor.rs:136:9
5: radicle::cob::patch::cache::query::find_by_revision
at ./crates/radicle/src/cob/patch/cache.rs:624:65
6: <… as radicle::cob::patch::cache::Patches>::find_by_revision
at ./crates/radicle/src/cob/patch/cache.rs:553:9
7: radicle_cli::commands::rad_patch::redact::run
at ./crates/radicle-cli/src/commands/patch/redact.rs:23:9
8: radicle_cli::commands::rad_patch::run
at ./crates/radicle-cli/src/commands/patch.rs:1026:13
[…]
It turns out that `sqlite::cursor::Row::read` is the panicky version of
`sqlite::cursor::Row::try_read` (which returns a `Result`).
While it is somewhat rare that SQLite reads fail, it is not unheard of.
In `radicle-cli` it might not be critical, but also `radicle-protocol`
and `radicle-fetch` are affected, and they could potentially panic a
`radicle-node` process.
Use `try_read` instead, and propagate down the error handling.
The `fn io_other` disguises all sorts of errors as I/O errors, making
errors in the transport component of `radicle-fetch` harder to
understand.
Instead, expose a new error type that allows to discriminate.
The upgrade of the `radicle-crypto` crate was missed when upgrading
semver versions.
Unfortunately, since it is at the base of the dependency tree, all
crates that depend on it require an additional upgrade.
Prepare the crates for releasing to crates.io:
- radicle-remote-helper: 0.10 -> 0.11
- radicle-term: 0.12 -> 0.13
- radicle-cli: 0.13 -> 0.14
- radicle-node: 0.11 -> 0.12
- radicle-fetch: 0.11 -> 0.12
- radicle: 0.15 -> 0.16
It was also necessary to specify the `version` in the workspace Cargo.toml file,
since this is required for publishing to crates.io.
Josh Soref
Lorenz Leutgeb
Fintan Halpenny
Adrian Duke
Lorenz Leutgeb
Matthias Beyer
