Instead of `rad-web` just creating a session for an already running HTTP
API the command now starts the HTTP API, creates a session and opens the
authentication link.
Signed-off-by: Thomas Scholtes <geigerzaehler@axiom.fm>
Previously, we might ban a node if we're having trouble connecting to
it, but this could be due to internet connectivity issues.
We introduce a penalty score for nodes, that increases if there are
connection issues or the node misbehaves, and decreases on successful
connections.
When connected to new nodes, we sort them so that low-penalty nodes are
attempted first.
We create a system for migrating the our databases, as well as a first
migration, for adding a `penalty` field to the `nodes` table, which we
are going to need soon, as an example.
There are two vulnerabilities that were due to `ssh-key`'s
dependencies[[0]][[1]].
Updating to ssh-key-0.6.3 removes the vulnerability[[0]], however,
there is no existing patch for [[1]] but it is being worked on.
[0]: https://rustsec.org/advisories/RUSTSEC-2022-0093
[1]: https://rustsec.org/advisories/RUSTSEC-2023-0071
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
There is no need for the ';' in the `.envrc` file.
Do not run checks in devShell so that it's possible to enter the shell
while code is being edited and is not compiling. Also include
`cargo-nextest` so that one can test in the shell.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Some test flakes would occur due to the `converge` function looping
forever. It was noticed that in these cases the log output would look
like:
test: Node z6MkqTKLVnFdVF24PQiDoQffbTPT7U5igghS3XWuFJLfah1P has
{(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkemMxfWhRQFKy4UPX7FsN8GjLAZ9T65rbmDsUn7fchioP)),
(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkpdPJp7naAurUjCpwef1BDD5jfPhAvwfinaGd7pVh227j)),
(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkqTKLVnFdVF24PQiDoQffbTPT7U5igghS3XWuFJLfah1P))}
with further investigation, the variable `all_routes` was found to be
smaller than the calculated routes.
Instead of checking `==`, instead check that
`routes.is_superset(&all_routes)`, which means that `routes` must be
equal to `all_routes`, but allows it have extra entries.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since node announcements are stored and retrieved from disk (due to the
PoW), the timestamp on it is never updated. This means it can be too old
to cache and not sent/received by nodes. Fix this by having a max age.
It's actually not such a great idea to sync on git-fetch and
git-ls-remote, as syncing is supposed to happen in the background
already, and if you want to force a sync, you can just call `rad sync`.
Previously, it would be annoying that when you called `rad sync` and
then `git fetch`, it would still attempt another sync, for example.
Moving forwards, it might make sense to call `git-fetch` on `rad sync`
(so the other way around), because `git-fetch` is free (it doesn't talk
to peers), and you almost always want your working copy up to date with
your storage.
Instead of creating the DB policies handle when needed, construct the
handle when the `Worker` pool is being constructed.
This replaces the usage of the DB handle with the `Worker`'s field
instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If a node had removed a seeding policy and another node fetched from
it, then it would perform the fetch.
Instead, check the policy during the authorization step and prevent
the fetch is the resulting policy is `Block`.
Note that the policy will be `Block` iff the `Block` policy was
specifically set or the `Block` is the default policy for the node.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Nix Flakes[[0]] are a more modular way of expressing nix derivations.
The `flake.nix` file describes:
- How to build the project, or components of a projet, via `nix build`
- What "checks" can run for a project, which can be executed via
`nix flake check`
- What binaries can be run, e.g. `nix run .#rad` to execute the CLI
This approach is preferable since a lot of the Nix ecosystem is using
Flakes -- despite it still being marked as experimental.
One interesting benefit, that needs confirming, is that a check can be
run from a remote Git source. So if someone creates a patch on
Radicle, someone else with the `nix` binary can execute:
nix flake check git+https://app.radicle.xyz/nodes/seed.radicle.xyz/rad:z3gqcJUoA1n9HaHKufZs5FCSGazv5?refs=patches/<patch id>
This means that anyone with `nix` can check patches without having to
fetch the patch itself.
Another obvious benefit will be that it allows the Radicle binaries to
enter the Nix ecosystem.
The big caveat to both of the above is that, currently, the tests are
failing while running `nix flake check`. They are currently disabled
with `doCheck = false`. They are potentially failing due to some
strange sandboxing issues which are being looked into.
[0]: https://nixos.wiki/wiki/Flakes
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
In some cases, there's a chance for the patch to not have arrived
before trying to check it out in the `alice` repo.
Ensure that the patch is present by first running `rad sync -f`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
Previously we panicked if a revision wasn't found after an update. But
it can happen that the update goes through yet a concurrent update
prevents the revision from being valid.
To partially deal with this, we don't try to lookup the revision after
an update, we simply return the ID. This means a subsequent lookup can
fail, and the error can be handled there.
It's not currently possible to force-push rad/master if it's not a
rollback, even if you are the only delegate. Since there is no risk
in doing that, we allow it in this patch.
Split the commands and change the naming.
* Tracking a repo is now called "seeding"
* Tracking a peer is now called "following"
In this commit, we don't change most of the internal code, only the
user-facing part.
It is more natural for the review command to exist as a subcommand of
patch, since the reviews are for patches.
Remove the `rad review` command, moving its functionality to the `rad
patch` command. The rad-patch.md and rad-review-by-hunk.md tests are
modified to use the `rad patch review` command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Use the derive and `#[default]` mechanism for deriving the default of
`Message`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Rename the --remove options to --delete for assign and label, to be
more consistent with review, and let this be the standard.
Clean up any typos around labels/dids and issues/patches.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Make the CLI easier by unifying the label and unlabel, using `--add`
and `--remove` options instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the assign and unassign commands to exist as
subcommands of the object they are assigning to, i.e. issues and
patches.
Remove the rad assign and rad unassign commands, moving their
functionality to the rad issue and rad patch commands. The
rad-issue.md and rad-patch.md tests are modified to include a assign
test.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Align the naming with the field itself and Patch::assignees.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
New endpoint on `PUT api/v1/node/policies/repos/:rid` and `DELETE api/v1/node/policies/repos/:rid`,
that allows to track and untrack a project.
For tracking a project we also accept `?from=<nid>` to specify
where we should fetch from after tracking a repo.
This allows the display of any edits done to comments,
replies and issue descriptions.
This commit doesn't remove the body property
which is the latest comment body but adds a edits property.
Also adds an author property to the `Edit` struct,
which allows us to see the author of an edit action.
Update to git2-0.18.1, which also requires updating radicle-git-ext
and radicle-surf.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Conventionally, manual page have a FILES and an ENVIRONMENT top level
section, instead of sub-sections. Following convention makes it easier
and faster for experienced Unix users to find what they need.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
cloudhead
Thomas Scholtes
Sebastian Martinez
Fintan Halpenny
Fintan Halpenny
Lars Wirzenius