This command shows the sync status of a repository by consulting the
database via the node.
To make it work, we call into the address store to update the
`repo-sync-status` table when receiving ref announcements that are
relevant to us.
An informational message for the protocol is useful for sending
messages to a node that is not required to be relayed.
This message is introduced by starting with an ACK message for a set
of references being synced. This fixes an issue for announcing to a
node that is already synced, since it can now ACK that it received the
message and replies that it is synced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The bounds on `collect_from` were overly restrictive. Allow any
`IntoIterator` be used as an argument, while taking ownership, rather
mutably borrowed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It can be useful to be able to check if a repository contains a given
commit. Add a `contains` method to the `ReadRepository` trait to
handle this.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The previous system allowed the same RID to be fetched from multiple
nodes concurrently, which caused issues, especially when cloning.
Worker code assumes that there is only one fetch per repository going on
at any given time. This change ensures that.
We keep a global fetch queue, instead of having a queue per session. We
also enqueue fetches if a session is at capacity. Finally, we allow
multiple fetch requests to receive results for the same fetch.
The pack-writer perfectly consumes all input of the pack without
overshoot, which it can as it knows how many objects it ought
to read.
Thus, the last packetline of the pack is consumed to the last
byte without ever asking for more data that would then be denied
as the flush packet is encountered.
This needs to be accounted for in the calling code.
Signed-off-by: Sebastian Thiel <sebastian.thiel@icloud.com>
Previously, it was possible for the `wire::serialize` function to panic
due to large ref announcements. Now that ref announcements are properly
bounded in size, this shouldn't happen anymore.
It's possible that a temporary directory can be created on a different
mount, and when moved during a clone, creates an I/O error.
To prevent this, add a method to `Storage` which creates a temporary
directory and `Repository` with the path in the form
`<rid>.lock`.
This `.lock` path name can easily be skipped when listing
repositories. Further tooling can be added for detecting leftover
`.lock` directories if, for some reason, they were not cleaned up by
the `tempfile` crate.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The test suite for `radicle-httpd` assumed that `master` would be used
for the working copy. However, if a user set their Git default branch
to be something other than `master` then the test suite will fail for
them.
To remedy this, initialise the working copy with the `master` branch
as well.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of creating the tree to check if `rad/sigrefs` has changed, it
is possible to check that the signature of the signed refs being
updated is the same as the old one. If so, then there are no
changes. Otherwise, there must be changes and the update can continue
to create the necessary Git objects.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, we would process any valid inventory or refs announcement.
This could cause problems for keeping sync statuses, as we could get
a refs announcement from a node that isn't in our database.
In practice, there is no good reason why we should receive a refs or
inventory announcement before the announcer's node announcement, unless
nodes are not following the protocol.
Implementing this change meant that many of the tests needed updating,
as it wasn't assumed that a node announcement was needed before
receiving inventories etc. from a peer.
We also had to implement a basic form of node address banning to make
the tests pass after this change.
We add the necessary database table to keep track of which node has
synced which of our repos. This will be useful for giving the user
information on the sync status of every local repository.
* Set peer's `last_active` even if they are being throttled
* Make sure not to break out of loop in wire module
* Add some more logging
* Use different variable for session filtering to make it clearer
We improve the API so that error messages can be sent back and are
always expected as potential responses to commands. This means that
`CommandResult` is always the type that is sent for commands.
This includes some breaking changes, for example the default "success"
message is simply `{}` instead of `{"status":"ok"}`.
Instead of trying to handle cases where delegate branches diverge, we
simply throw an error in those cases, which prevents the canonical head
from updating.
This simplifies the code a lot, and forces the user to take action when
such an event occures.
It is desirable to keep the Git repositories in Radicle efficient by
ensuring objects are packed and unreachable objects are removed.
Add a process call to `git gc` to achieve this. Two flags are used for
garbage collection: `--auto` and `--prune`. Their details are outlined below:
--auto
With this option, git gc checks whether any housekeeping is
required; if not, it exits without performing any work.
--prune=<date>
Prune loose objects older than date (default is 2 weeks
ago, overridable by the config variable
gc.pruneExpire). --prune=now prunes loose objects
regardless of their age and increases the risk of
corruption if another process is writing to the repository
concurrently; see "NOTES" below. --prune is on by default.
For `--prune` the default used is `1.hours.ago`. This was chosen over
`now` since that may be too aggressive after just fetching new data.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Ref announcements contain the namespace (NID) and the SHA of the new
`rad/sigrefs`. This information can be used by the fetch protocol to
fetch only those `Oid`s for those namespaces.
Add a new stage `SigrefsAnnouncement` that captures this behaviour by
only asking for the advertised `Oid`s and updating the corresponding
`rad/sigrefs` for each namespace. Note that this is a special case of
the `SpecialRefs` stage and so the protocol chooses between these two
by checking if there was announcement passed through. The following
stage, `DataRefs`, stays the same.
Note that this stage can only be activated via a `pull`, and `clone`
stays the same.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The RefsAnnouncement previous announced its complete set of
`rad/sigrefs`. This was useful in that verification can occur on the
receiveing side immediately by verifying the refs and proceeding with
the fetch -- note that it did nothing with the ref information it
received.
This can be minimised to only advertising the namespace, i.e. the
NID, and the new SHA of the `rad/sigrefs`. This is represented by a
new message type, `RefsAt`, which contains the NID and the Oid.
For checking if an announcement is stale or fresh, the receiving
side can check the existence of the SHA in its Git repository.
The tests are appropriately modified to use NIDs and Oids.
To prepare for a follow-up change, the announcement data is also
threaded through for the fetch protocol to focus fetching only the
advertised set of Oids.
N.B.: because the refs aren't communicated, the verification happens
when fetching since the data needs to be fetched before
verifying. This is a trade-off with minimising the message payload for
verifying earlier.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The minimal error for the `ReadRepository::reference_oid` method is
`git::raw::Error`.
Change the error type from `git::ext::Error` to `git::raw::Error`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
While there is a method, `unbound`, for converting a `BoundedVec` to
its inner `Vec`, it is common practice to implement the `From` trait.
Add the `From` conversion for `BoundedVec` and `Vec`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add debugging code for inspecting the in-memory Refdb of the Cache.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When performing a clone there are two potential issues.
The existing issue is that when a repository is created to clone into,
it does not contain any data initially. This leaves other node
operations thinking that a repository does exist but when they try to
perform operations on it, those will fail. These will be surfaced as
warnings but the node will continue to operate.
The other issue, while writing fetch v2, is that if a clone fails,
then cleanup needs to be performed -- to remove the empty repository
from storage.
To tackle both these issues, a temporary directory is used in the
place of the repository. If a clone fails then the temporary directory
is dropped and nothing needs to be done. If the clone succeeds then it
can be safely moved to the storage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's difficult to debug errors that mention a resource not being
found, but not which resource was not found.
Return the error message for not found variants.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of calling `std::fs::remove_dir_all` in the `rad rm` command,
use the `WriteStorage::remove` method.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, if a delegate's namespace was fetched and its rad/sigrefs
was behind the current state, then it would fail to perform the fetch.
Instead, when the ancestry path is checked the outcome can be used
during the update:
1. If the tip is equal, then the update can be marked as skipped.
2. If the tip is behind, then the update can be rejected, iff the
policy does not allow it.
3. If the tip is ahead, then the update is a fast-forward.
4. If the tip is diverged, then the update results in a failure, iff
the policy does not allow it.
The protocol also prunes any delegates's updates when the `rad/sigrefs`
is behind and returns an error if they are diverged.
For any non-delegates, it will simply prune them.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Previously, we would always ask nodes for messages from one hour ago.
This meant that we could miss messages if our node was offline for more
than an hour. This change uses a variable backlog by checking the
timestamp of the last gossip message we received.
Instead of storing received gossip messages in an in-memory `BTreeMap`,
we persist them to the database (`addresses.db`). There are two reasons
for this:
1. Node restarts do not wipe the state, meaning that it is much less
likely that some gossip message will get lost before reaching all
nodes.
2. This will allow us in the next commit to know how far behind we are
after a restart, to be able to request the correct time range of
gossip messages that we missed while offline.
Note that we now share the addresses.db file between two connections and
stores, which we don't do anywhere else. Having multiple connections to
the same database is fine, but the way we're having to do it is a bit
awkward. In a future patch, we could pull out the database schema from the
`address` module and rename the database to make things clearer.
This makes the divergence check on push slightly more lenient, by
allowing rolling back to a previous commit in the canonical branch
history.
Without this, it can become impossible to roll-back commits in certain
situations.
With the latest changes to fetching, `--scope all` will now clone all
remotes listed by the serving node.
Simplify by the `rad-clone-all` example by removing the extra fetch
and removing the corresponding TODO.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The git-daemon code is no longer needed since git-upload-pack is used
in its place.
Remove the git-daemon code from the runtime and worker.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
cloudhead
Fintan Halpenny
Sebastian Thiel
Sebastian Martinez