Adds an `Op::load` helper method for loading an `Entry`, given its `Oid` and the
`store` it is stored in.
This can be useful for downstream consumers to inspect operations on COBs given
a single `Oid`, without having to load the entire object and/or graph.
It can also be useful when looking at implementing COB stream primitives.
Instead of collecting the results and returning the collection as an
iterator, introduce `FollowPolicies` and `SeedPolicies` types, which
implement `Iterator`.
Note that a call in `service` changed due to the lifetime borrow. It
simply `collect`s into a `Vec` for the time being.
Provide functionality to lookup the `NodeId`s associated with a given
`Alias`.
The use for this functionality is to allow callers to use aliases as
shorthands for `NodeId`s, but still refer to the exact identifier.
The implementation allows for searching using the `LIKE '%<pattern>%'`
queries in sqlite, so searches do not have to be exact matches.
The use of `Transaction` outside of the `radicle` crate requires that a newtype is used, if the upstream code wants to write methods, such as:
```
pub struct Transaction<R>(store::Transaction<MyCob, R>);
impl Transaction<R> {
pub fn add_foo(&mut self, foo: Foo) -> Result<(), store::Error> { /* code */ }
pub fn add_bar(&mut self, bar: Bar) -> Result<(), store::Error> { /* code */ }}
```
This works up until the point that it tries to re-use the
`Transaction::initial` method.
To make this possible, the method needs to know that it can be
converted to the upstream `Transaction` and back to `radicle`
`Transaction`.
The nix flake's checks were failing for various reasons. The following fixes are
applied to get it up to date again.
- Update to release-24.11, since `crane` requires it – also to keep up-to-date
- Add `.json` to the source filters to allow for testing patch migration
- Ensure that the `rad` and `git-remote-rad` binaries are built for the nextest
check. N.b. the binaries need to be in the target dir of `radicle-cli` since
that is where the nextest check runs from.
- Add `cargo-audit` and `cargo-deny`, to the devShell, to allow for running those
tools locally
- Bump `gix-path` to 0.10.11 to avoid a vulnerability[^0]
[^0]: https://rustsec.org/advisories/RUSTSEC-2024-0371
Extend the ranges of emojis that are supported, listed
[below](#new-emojis-supported).
To ensure that single `char` emojis are supported, the `emojis` crate
is added as a dev dependency, using it to check that a `Reaction` can
be constructed for the two groups `SmileysAndEmotion` and
`PeopleAndBody`.
### New Emojis Supported
'🩵' 0x1FA75
'🩶' 0x1FA76
'🩷' 0x1FA77
'🫀' 0x1FAC0
'🫁' 0x1FAC1
'🫂' 0x1FAC2
'🫃' 0x1FAC3
'🫄' 0x1FAC4
'🫅' 0x1FAC5
'' 0x1FAC6
'🫠' 0x1FAE0
'🫡' 0x1FAE1
'🫢' 0x1FAE2
'🫣' 0x1FAE3
'🫤' 0x1FAE4
'🫥' 0x1FAE5
'🫦' 0x1FAE6
'🫨' 0x1FAE8
'' 0x1FAE9
'🫰' 0x1FAF0
'🫱' 0x1FAF1
'🫲' 0x1FAF2
'🫳' 0x1FAF3
'🫴' 0x1FAF4
'🫵' 0x1FAF5
'🫶' 0x1FAF6
'🫷' 0x1FAF7
'🫸' 0x1FAF8
The `parse_ref` and `parse_ref_namespaced` documentation used 4 space
indentation for the reference names. Unfortunately, `cargo test` attempts to
interpret this as code.
Use triple-backtick code fencing, with `text` and `no_run`, instead.
Add the remaining `Patch` actions to the CLI interface. These include:
- React to a revision
- Edit a comment
- React to a comment
- Redact a comment
The `react` subcommand is added in a straight-forward manner.
The comment commands are slightly less straight-forward. In order to
keep to one layer of subcommands, these variants are done through the
`rad patch comment` subcommand. They are accessed via options:
`--edit`, `--react`, and `--redact`, respectively. Each of these
options takes the `CommentId` for which the action is affecting. The
`message`, `react` (introduced for `rad patch react`), and `undo`
variables repurposed for this subset of actions.
Change configuration of native CI to only deny warnings from the
compiler, but no all clippy lints.
Previously we ran "cargo clippy --all-targets --workspace -- --deny
clippy::all", which overrides the allows for specific clippy lints in
the source code. We don't want that.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
Indicate that the `rad issue state` operation was successful to the
user by printing a message to the console.
Solves:
rad issue show 71020de8478b15b3f7a619f2f93d3cfb8771cde2
Add the ability to edit an issue comment to the `rad issue` command.
This is achieved by adding an `--edit` option to `rad issue
comment`. Note that if `--reply-to` and `--edit` are both specified,
then this results in an error.
To be able to query the `BTreeSet` that shows which comments are
resolved by a specific revision and the `Iterator` of `Label` we require
some methods to obtain them.
Provide better documentation for the two methods.
Solves the issue:
```
rad issue show 4603f55d97a0776f37bae2f9d2ba7d455d8a4c83
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
rlimit values have different types on Linux and FreeBSD, as well as
64-bit and 32-bit platforms, so stick to the type rlim_t provided by the
libc crate.
If the user wants to see all `seeded` repositories, we should tell them
to use the `--seeded` option instead of the `--all` option.
Since `--all` also shows repos that aren't being seeded.
This simplifies the Dockerfile a little , as the zig package (0.12.0) is available on alpine 3.20
https://repology.org/project/zig/versions
parent image is also updated to current rust-toolchain
Signed-off-by: Yorgos Saslis <yorgos.work@proton.me>
There was mishap in updating the parameters of highlight configuration – so many
string types!
This is fixed by adding the correct `name` parameter, reusing the `language`
variable that is being matched on.
When piping the output in for eg. `head -n 1`, the `head` utility
might close down the pipe at some point, yielding a broken pipe error.
We catch that and simply return if that's the case.
If the rad node is spawned by systemd there won't be any logs file
to read and `rad node logs` command will fail with the standard
error message from fs.
Adds the new `migrate` sub-command to migrate the COB database.
Checks for version when opening the COBs database and suggests the
command on out of date version.
Also adds the 2nd migration to the COBs cache, which updates the patch
JSON schema.
Fintan Halpenny
Lorenz Leutgeb
Yorgos Saslis
Lars Wirzenius
Sebastian Martinez
Leah Neukirchen
cloudhead
Arnaud Bailly