Prevent `rad patch update` to create an identical revision to any
other revision in the patch, rather than just the latest revision.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
By default, this command now:
* Follows the peer if not already followed
* Syncs refs of the peer, if it wasn't followed before
* Fetches refs into working copy
This functionality can be disabled via `--no-sync` and `--no-fetch`.
Since sqlite is used for the databases, including the sqlite3 binary
in the devShell is useful for debugging purposes.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add functionality for lising the remotes that are in the storage
repository, but a working copy remote has not yet been created for
them.
This functionality is included in the `rad remote` command since it
can be directly used for creating Git remotes using the same command,
i.e. `rad remote add`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
seeding` behaviour under `rad seed`. When an `<rid>` isn't
provided then the seeded repositories are listed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
following` behaviour under `rad follow`. When an `<nid>` isn't
provided then the followed nodes are listed.
This includes filtering by alias, when `--alias` is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shell out to `git`, avoiding using `git2`. This is to avoid an
issue where somewhere within the fetch there is an attempt to lookup a
`rad/sigrefs` object, which says that the object is missing. It is
suspected that this is due to the object being localised in the same
packfile as other objects we are fetching. Since the `rad/sigrefs`
object is never needed nor used in the working copy, this will always
result in the object missing. This seems to only be an issue with
`libgit2`/`git2` and not `git` itself.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To make `CodeLocation` reusable across different components, require
that a commit's `Oid` is part of the struct.
An `Oid` is necessary since the `path` can refer to a path at any
point in time throughout the history of the repository. By pinning the
commit that is being referred to, the path will refer to the path
within the associated tree [of the commit].
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
`Infallible` is a more appropriate type in comparsion to `()` for
comments that do not require a `CodeLocation`.
That is because if the type for `location` is `Option<()>`, this means
that `Some(())` can be constructed, however, we never intend to
construct that variant. On the other hand, `Infallible` can never be
constructed, and so, only `None` can be used.
This requires updates to some functions to use the generic `T` and
also handle the different kinds of `Comment`s -- `Infallible` and
`CodeLocation`.
X-Co-Authored-By: Fintan Halpenny <fintan.halpenny@gmail.com>
Allow some margin of error when sending multiple inventory announcements
at a time. Previously, they might end up with the same timestamp, so
only the first announcement would be processed by nodes. Now, we ensure
that the timestamp is updated.
To be able to use log setup across the different components of
heartwood, expose a `logger` module from `radicle`. This also includes
a `test` logger.
These modules are guarded behind a `logger` feature flag, so that
other crates are not bringing any uneeded dependencies.
This allows logging to be setup in `radicle-cli-test` so that when a
test fails, the log output is present for debugging purposes.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The hint for updating a patch incorrectly printed:
git push rad -f HEAD:rad/patches/<patch id>
The remote, `rad`, is already specified so the the right hand side of
the refspec should only be `patches/<patch id>`.
Fix this by stripping the remote from the name of the branch in the
remote helper.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When a peer is performing a background and foreground fetch from two
different peers, the background fetch result was being used as the
result for the foreground fetch. This results in inconsistencies,
since the foreground peer has new updates from themselves.
The reason for this issue was the fetches that were queued were not
correctly being handled, and the other peer's results were being
returned instead.
This fixes the queueing and dequeueing by ensuring that the queued
fetch occurs, passing the correct result channel. This fetch will then
be subsequently dequeued correctly and the foreground fetch obtains
the correct result.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This test is flakey and requires further investigation. Some extra
assertions are added to ensure that the expected behaviour is
happening upon fetching. It is unknown if the fetch queue is behaving
properly, and it's suspected that some existing fetch results might be
used for queued fetches.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the CLI user to update a patch's base commit through the `rad
patch update` command.
There was check to see if the head of the branch was the same as the
head of the revision, which would result in the update being skipped.
This was adapted to check that the head *and* the base were the same.
A test was added in the examples to showcase this use.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When we perform updates to cobs we tend to want to sync those changes
to the network after. This patch automatically does this for
operations that perform updates to issues and patches.
Note that `--announce` becomes the default for the `rad patch`
command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of `rad-web` just creating a session for an already running HTTP
API the command now starts the HTTP API, creates a session and opens the
authentication link.
Signed-off-by: Thomas Scholtes <geigerzaehler@axiom.fm>
Previously, we might ban a node if we're having trouble connecting to
it, but this could be due to internet connectivity issues.
We introduce a penalty score for nodes, that increases if there are
connection issues or the node misbehaves, and decreases on successful
connections.
When connected to new nodes, we sort them so that low-penalty nodes are
attempted first.
We create a system for migrating the our databases, as well as a first
migration, for adding a `penalty` field to the `nodes` table, which we
are going to need soon, as an example.
There are two vulnerabilities that were due to `ssh-key`'s
dependencies[[0]][[1]].
Updating to ssh-key-0.6.3 removes the vulnerability[[0]], however,
there is no existing patch for [[1]] but it is being worked on.
[0]: https://rustsec.org/advisories/RUSTSEC-2022-0093
[1]: https://rustsec.org/advisories/RUSTSEC-2023-0071
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
There is no need for the ';' in the `.envrc` file.
Do not run checks in devShell so that it's possible to enter the shell
while code is being edited and is not compiling. Also include
`cargo-nextest` so that one can test in the shell.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Some test flakes would occur due to the `converge` function looping
forever. It was noticed that in these cases the log output would look
like:
test: Node z6MkqTKLVnFdVF24PQiDoQffbTPT7U5igghS3XWuFJLfah1P has
{(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkemMxfWhRQFKy4UPX7FsN8GjLAZ9T65rbmDsUn7fchioP)),
(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkpdPJp7naAurUjCpwef1BDD5jfPhAvwfinaGd7pVh227j)),
(Id(rad:z39WuDs9hrqmCr9shjoz6dn2Abqyz),
PublicKey(z6MkqTKLVnFdVF24PQiDoQffbTPT7U5igghS3XWuFJLfah1P))}
with further investigation, the variable `all_routes` was found to be
smaller than the calculated routes.
Instead of checking `==`, instead check that
`routes.is_superset(&all_routes)`, which means that `routes` must be
equal to `all_routes`, but allows it have extra entries.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since node announcements are stored and retrieved from disk (due to the
PoW), the timestamp on it is never updated. This means it can be too old
to cache and not sent/received by nodes. Fix this by having a max age.
It's actually not such a great idea to sync on git-fetch and
git-ls-remote, as syncing is supposed to happen in the background
already, and if you want to force a sync, you can just call `rad sync`.
Previously, it would be annoying that when you called `rad sync` and
then `git fetch`, it would still attempt another sync, for example.
Moving forwards, it might make sense to call `git-fetch` on `rad sync`
(so the other way around), because `git-fetch` is free (it doesn't talk
to peers), and you almost always want your working copy up to date with
your storage.
Instead of creating the DB policies handle when needed, construct the
handle when the `Worker` pool is being constructed.
This replaces the usage of the DB handle with the `Worker`'s field
instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Fintan Halpenny
cloudhead
Sebastian Martinez
Fintan Halpenny
Thomas Scholtes