To allow `rad sync` to break early from the call to `announce`,
control flow is introduced for the callback.
In `rad sync`, the number of synced nodes is checked against the
`replicas` -- if specified -- and sends a `Break`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, the head of the opened patch would not be displayed, and
so the user could not tell what it was if any updates were applied.
Show the head for the opened revision. The below shows the difference
between before and after, respectively:
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) (8b0ea80) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow `rad patch edit` to take a `--revision` option which will edit
the description of the specified revision, rather than the root
revision.
If the flag is not specified, then the original behaviour of editing
the root revision's title and description is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a timeline of a patch be global and sorted by
timestamp, organise it via revisions. Each revision has an entry in
the timeline, sorted by timestamp. Under each revision, a series of
updates are inlined, also sorted by their timestamps. Currently, these
updates can either be reviews or merges.
For example:
```
├────────────────────────────────────────────────────────────────────────────┤
│ ● opened by fintohaps (you) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ ↑ updated to 5f2a123e3f2aa60f2e03815df283563495b73085 (a1c3c0f) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ └── ✓ merged by cloudhead (z6Mkt67…v4N1tRk) now │
╰────────────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
By default, this command now:
* Follows the peer if not already followed
* Syncs refs of the peer, if it wasn't followed before
* Fetches refs into working copy
This functionality can be disabled via `--no-sync` and `--no-fetch`.
Add functionality for lising the remotes that are in the storage
repository, but a working copy remote has not yet been created for
them.
This functionality is included in the `rad remote` command since it
can be directly used for creating Git remotes using the same command,
i.e. `rad remote add`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
seeding` behaviour under `rad seed`. When an `<rid>` isn't
provided then the seeded repositories are listed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
following` behaviour under `rad follow`. When an `<nid>` isn't
provided then the followed nodes are listed.
This includes filtering by alias, when `--alias` is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Shell out to `git`, avoiding using `git2`. This is to avoid an
issue where somewhere within the fetch there is an attempt to lookup a
`rad/sigrefs` object, which says that the object is missing. It is
suspected that this is due to the object being localised in the same
packfile as other objects we are fetching. Since the `rad/sigrefs`
object is never needed nor used in the working copy, this will always
result in the object missing. This seems to only be an issue with
`libgit2`/`git2` and not `git` itself.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The hint for updating a patch incorrectly printed:
git push rad -f HEAD:rad/patches/<patch id>
The remote, `rad`, is already specified so the the right hand side of
the refspec should only be `patches/<patch id>`.
Fix this by stripping the remote from the name of the branch in the
remote helper.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the CLI user to update a patch's base commit through the `rad
patch update` command.
There was check to see if the head of the branch was the same as the
head of the revision, which would result in the update being skipped.
This was adapted to check that the head *and* the base were the same.
A test was added in the examples to showcase this use.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When we perform updates to cobs we tend to want to sync those changes
to the network after. This patch automatically does this for
operations that perform updates to issues and patches.
Note that `--announce` becomes the default for the `rad patch`
command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow the user to specify a directory to clone into when
performing `rad clone`.
Signed-off-by: Fintan Halpenny <Fintan Halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's actually not such a great idea to sync on git-fetch and
git-ls-remote, as syncing is supposed to happen in the background
already, and if you want to force a sync, you can just call `rad sync`.
Previously, it would be annoying that when you called `rad sync` and
then `git fetch`, it would still attempt another sync, for example.
Moving forwards, it might make sense to call `git-fetch` on `rad sync`
(so the other way around), because `git-fetch` is free (it doesn't talk
to peers), and you almost always want your working copy up to date with
your storage.
In some cases, there's a chance for the patch to not have arrived
before trying to check it out in the `alice` repo.
Ensure that the patch is present by first running `rad sync -f`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Since forking creates your `rad/sigrefs`, which then needs to be backed
up forever, we avoid forking on `rad clone`. This should make little or
no difference for users, as the "fork" will be created on `git push`.
Split the commands and change the naming.
* Tracking a repo is now called "seeding"
* Tracking a peer is now called "following"
In this commit, we don't change most of the internal code, only the
user-facing part.
It is more natural for the review command to exist as a subcommand of
patch, since the reviews are for patches.
Remove the `rad review` command, moving its functionality to the `rad
patch` command. The rad-patch.md and rad-review-by-hunk.md tests are
modified to use the `rad patch review` command.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Rename the --remove options to --delete for assign and label, to be
more consistent with review, and let this be the standard.
Clean up any typos around labels/dids and issues/patches.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Make the CLI easier by unifying the label and unlabel, using `--add`
and `--remove` options instead.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the assign and unassign commands to exist as
subcommands of the object they are assigning to, i.e. issues and
patches.
Remove the rad assign and rad unassign commands, moving their
functionality to the rad issue and rad patch commands. The
rad-issue.md and rad-patch.md tests are modified to include a assign
test.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It is more natural for the label and unlabel commands to exist as
subcommands of the object they are labelling, i.e. issues and
patches.
Remove the `rad label` and `rad unlabel` commands, moving their
functionality to the `rad issue` and `rad patch` commands. The
`rad-issue.md` and `rad-patch.md` tests are modified to include a
label test.
The `rad patch show` command did not support showing labels as part of
its output. This was also included to confirm the test above was working.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
My use case for this is to have a script that lists my outstanding
patches so I can ping people for review or merge if there's no
movement for a long time.
Signed-off-by: Lars Wirzenius <liw@liw.fi>
Allow the caller of `rad sync` to `--sort-by` the NID, alias, or
status of the seeds.
This prevents random ordering, due to timestamps, in CLI testing.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's necessary for a delegate's references to be present, e.g.
verification, calculating of canonical data, etc.
To ensure that a user does not get themselves into a state where they
have added a delegate without their references, prevent adding a
delegate to the identity document if their `rad/sigrefs` is not
present.
As well as this, it ensures that if there is a `rad/sigrefs` that it
has the default branch -- since it's possible for a peer to have created
`rad/sigrefs` through COBs without a default branch.
This change meant that the `rad-id` tests required the test scenarios
to be set up with all nodes having each other's references. A test
case to add a missing delegate was also added to `rad-id.md`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The call to `rad sync -a` can end up with different output if the `git
push` has already announced to the network -- ending up with the nodes
already be in sync.
Instead, for consistency, leave the syncing up to the `git push` and
remove the call to `rad sync`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the local peer does not have any `rad/sigrefs` then there is no
risk of any data corruption. In this case the repository can be
removed entirely.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Removing a repository completely can result in data corruption for
users, since a user's `rad/sigrefs` are the ground truth of their
state, and any fork of them results in errors in the protocol.
Instead of `rad rm`, we replace it with `rad clean` that removes all
remotes other than the local peer's namespace and the delegates'. The
delegates are also necessary to keep, since the repository's identity
is dependent on them.
Note that the remotes that were cleaned will be populated again upon
fetching, as long as they are tracked.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Distinguish between repos that are simply tracked, vs. repos that are
cloned (and thus forked). By default, we don't show repos that don't
have a local fork.
Add the `--revision` option for `rad patch checkout`. This allows the
user to specify a particular revision of the patch to checkout. If the
revision is not specified it will use the latest revision of the patch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add the `--name` option to `rad patch checkout`. This allows the user
to name the branch they are checking out, rather than use the
`patch/<short-id>` format.
This change includes returning early for setting the upstream branch,
if the upstream already existed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add a `--force` flag to forcibly checkout the branch to the latest
revision, if the branch already exists.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Currently, if refs are updated while the node is stopped, these refs are
not immediately announced when the node starts, due to the node being
unaware of the updates.
To remedy this, on startup, we compare the refs we have in storage with
the refs we announced to the network. Since only our own refs could have
changed while the node was stopped, this change only applies to owned
refs. If we detect that storage has changed while the node was stopped,
we create ref announcements for the updated repos and store them in our
gossip database. These announcements will be included with other
historical gossip announcements when nodes connect to us.
To keep track of what was announced, we store our local node's sync
status in the database. This is also useful when using the `rad sync status`
command, as it tells us what oid our local node is at, and whether it
is aware of our local changes yet.
In addition to this, we make a small fix: previously, inventory and ref
announcements originating from our local node were not stored in the
announcement database. We ensure that they are via the new `announce`
method.
This command shows the sync status of a repository by consulting the
database via the node.
To make it work, we call into the address store to update the
`repo-sync-status` table when receiving ref announcements that are
relevant to us.
An informational message for the protocol is useful for sending
messages to a node that is not required to be relayed.
This message is introduced by starting with an ACK message for a set
of references being synced. This fixes an issue for announcing to a
node that is already synced, since it can now ACK that it received the
message and replies that it is synced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This makes the divergence check on push slightly more lenient, by
allowing rolling back to a previous commit in the canonical branch
history.
Without this, it can become impossible to roll-back commits in certain
situations.
With the latest changes to fetching, `--scope all` will now clone all
remotes listed by the serving node.
Simplify by the `rad-clone-all` example by removing the extra fetch
and removing the corresponding TODO.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This change allows users to track/untrack peers and repos without a
running node. This fixes a bug when running `rad init` without the node
running, where the repo would be tracked with a different scope than
what was specified on the CLI.
The `rad patch checkout` command would blindly create a branch when
being executed. If there was a branch already existing and user had
committed to that branch, switched without updating the patch, and
then switched back, then they would lose the commit on that branch --
the original commit of the patch would be taken instead.
Fix this by first checking if the branch existed beforehand, and
setting the workspace to use that branch's commit.
Add a test to ensure that this works as expected.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When specifying a `patch.base` to point to for stacking patches, it's
useful to accept any kind of revspec, e.g. `HEAD^`.
Change the argument parsing to use the `Rev` type instead, and change
the `rad-patch-ahead-behind` to use `HEAD^` to test the example usage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When testing the CLI, "since"-calculations will result in different
values over time:
now
1 month ago
2 months ago
10 months ago
1 year ago
10 years ago
Initially, the solution was to use the wildcard match from `snapbox`,
`[..]`, to match on these values. However, since these values change
in length it means that they will affect the width of the tables
produced by the CLI.
To ensure the width is stable across runs over time it's possible to
use a time that is the same as the commit time used at testing.
To do this the `Timestamp` type is now a newtype which has a
constructor `now` which will use the `RAD_COMMIT_TIME` env variable
for construction, if it's available and in debug mode. This ensure
that all "since"-calculations will result in `now`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Introduces a new COB type to store repository identity documents.
The reason for this change is to:
1. Simplify the code, as the identity document logic resembled a COB,
yet it had custom logic. This allows existing COB code to be used for
identities.
2. Make identity document update logic more flexible, since COB actions
can be added in the future.
3. Re-purpose existing tools around COBs to work on identities, eg. `rad
cob`.
4. Unify the concept of an identity change proposal, with regular identity
changes. This means we can remove the `id.proposal` COB in favor of
using the `id` COB itself.
Notes
-----
* Each repository has one Identity COB.
* The `Proposal` COB has been repurposed into the `Identity` COB.
* Identity documents are stored as *embeds* inside the Identity COB
actions.
* The action that contains new document versions is called `revision`,
just like the Patches COB.
* The namespaced `rad/id` ref is a symbolic reference to that Identity
COB.
* The canonical `rad/id` ref is a direct reference to the commit in the
Identity COB that contains the latest *accepted* revision of the
document.
* All commands for managing identities have been folded into `rad id`.
Hence `rad delegate` and `rad edit` are removed.
* The concept of "rebasing" an identity document is gone.
* The `rad id` output has been updated to match the style of other
commands.
* When a revision has enough signatures, it is automatically adopted as
the current identity, there is no longer the need for a "commit"
action.
* When an identity revision is proposed, and the current identity has a
threshold of `1`, that identity is automatically accepted due to the
above point.
* The idea of "verifying a peer's identity branch" no longer applies, as
COBs cannot be verified one history at a time.
* Since the root commit of the Identity COB does not have a "Resource"
to point to (it would have to point to itself, which is impossible),
we've made the resource id optional for COBs.
The `Element::render` function now takes a constraint object. This
allows the parent element to influence how the child is rendered. This
is useful eg. to have elements take up more space than they need to fill
some space.
We also make various changes needed for pretty diffs, such as merging
styles, a new `Filled` type, and some color theming.
Changes the behavior of `git fetch` by running a radicle network-level
fetch (ie. `rad sync --fetch`) before fetching refs from storage. This
avoids having to run `rad sync` before `git fetch`; and tries to make
sure that refs are always fresh.
As a delegate, you shouldn't be able to delete your default branch.
This would most likely happen by mistake, and it prevents the canonical
head from being calculated correctly.
On push, we check whether the resulting state would cause a
divergence/fork in the canonical head, and if so, prevent the push from
happening.
This is to avoid situations where delegates have to then rollback their
heads.
Note that this doesn't prevent forks from happening altogether, as they
could happen asychronously, but it mitigates the problem.
The `Patch` API and semantics are changed a little bit:
* It's now valid again to propose a revision without being the patch
author.
* To get revisions by the patch author, `Patch::updates` is used.
* `Patch::latest` now only looks at revisions by the patch author.
* Added `Patch::revisions_by`, `Patch::authors` and `Patch::latest_by`.
* The merge behavior on git-push is improved to favor revisions that
merge more recent commits. We also allow for merging the non-latest
revision.
When `rad issue show` is run, the issue comments are shown by default.
This can be tweaked using the `--format` option. A value of "header"
only shows the header, while the default which is "full", shows the
header and comments.
This allows a user to choose private or public visibility on `rad init`.
It also improves the output to tell the user what happened due to this
choice.
It didn't make sense to get eg. `Patch failed` when listing patches
failed. We change all fatal errors to simply "Error:", giving more
control over the individual commands.
After cloning, we show a cool little summary with some repo stats.
We had to make some adjustments to the way visual width is calculated
due to a bug surfaced around emoji width calculation. Unfortunately
there isn't a perfect solution that works across terminals yet, so the
"variation selector 16" code-point is filtered out for now.
When a fetch is user-requested, a timeout can be supplied that is passed
down to the worker.
When a fetch is service-requested, a default timeout is used.
This adds functionality so that on `rad sync` and `rad clone`, we
connect to known seeds if necessary, before attempting to fetch.
In passing, some related changes were made:
* The `rad sync` command's arguments were reworked:
`--replicas <count>` can be used to specify a replica count when
fetching
* The `rad patch` command no longer has a `--fetch` option
* It's now possible to tell the node not to automatically connect to
peers in the background
* `AddressBook` is being used underneath `Seeds` to allow for shuffled
iteration
Only return once the connection is established or failed.
It's still not perfect, as several failure scenarios are not handled,
but it's an improvement.
> I'm going to be making a set of breaking changes to COBs in order to
stabilize the data formats. This is hopefully a one-time change that
bundles various breaking changes.
All COBs have been reworked: issue, patch, id.
The changes included are:
* Revise the assign and tag actions to take a single list of
assignees/tags to set, instead of an "add" and a "remove" list. This
makes API usage simpler when editing issues, and simplifies the apply
function
* Rename "tags" to "labels", and the tag action to label. This is
because tag is confusing in the context of git, as it could mean a git
tag. Using label removes that confusion.
* Use DIDs instead of PublicKeys for assignees -- this is more
future-proof
* Modify the manifest file format in the COB tree. Mainly, remove the
`history_type` key which is redundant, and use camelCase for keys
* Flatten the `Thread` actions into the parent action type
* Ensure that operations on redacted objects do not fail, since
redactions could have happened concurrently
* Use a consistent naming scheme for actions, using `.` as separator
* Consolidate comment types and remove `CodeComment`, by adding an
optional `location` field to `Comment`
* Add many placeholder actions that are not yet implemented
To preserve backwards compatibility, a `legacy` module is created with
the old `apply` function. When loading the manifest, we check whether it
is a legacy COB or a "stable" COB, and in the legacy case, use the
legacy code to materialize the state and then convert the object into
the stable type. Eventually, we'll delete the legacy code.
Some of the old patches had missing objects and that causes problems
during the ref advertisement, as the object is not found.
In this patch, we check that the object exists and also that the patch
is still open. Otherwise a remote tracking branch is created for every
single patch ref.
If you accidently merge updated patch code before updating the patch in
storage, you end up in this weird state where you can't update the patch
any longer. This fixes it.
This is a fairly substantial change, which adds a new configuration file
to the user's `$RAD_HOME` that includes node configuration, including
the alias, and also makes node aliases required.
When running `rad auth`, the user is now prompted for an alias, which
defaults to `$USER`.
When running `rad self`, the alias is now shown.
If the user runs radicle without a config file, the defaults are loaded,
and `$USER` is used as the alias.
* Add `--home` flag
* Organize the information better
Now looks like this:
DID did🔑z6MknSLrJoTcukLrE435hVNQT4JUhbvWLX4kUzqkEStBU8Vi
└╴Node ID (NID) z6MknSLrJoTcukLrE435hVNQT4JUhbvWLX4kUzqkEStBU8Vi
SSH running (823)
├╴Key (hash) SHA256:UIedaL6Cxm6OUErh9GQUzzglSk7VpQlVTI1TAFB/HWA
└╴Key (full) ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHahWSBEpuT1ESZbynOmBNkLBSnR32Ar4woZqSV2YNH1
Home [..]
├╴Storage [..]/storage
├╴Keys [..]/keys
└╴Node [..]/node
Remove most of the user-friendly functionality and simplify this command
so that it is only used for scripting.
`git push rad` is now the proper way of updating patches.
We consolidate the setup done by `rad checkout`, `rad clone` and `rad
remote add`, so that they all check for node aliases, and are all
capable of setting up tracking branches etc.
Remove this command in favor of the `git push` flow.
We also remove the `rad/patches` remote configuration which wasn't
working properly with `git fetch --all`.
Help the user when creating a patch by listing the messages of all
commits associated with the patch in almost the same format as git uses
for squashing.
Allows for setting a patch message during a push. Eg.:
$ git push -o patch.message="My Title" -o patch.message="My description" \
rad HEAD:refs/patches
Works the same way as the `-m` flag of `git commit`.
When applying a `Merge` action, we verify that the commit is in the
history of the default branch of that user.
Since this is not the case when issuing a `rad merge`, and since that
command is no longer needed with the push-based merge, we remove the
`rad merge` command completely.
Allows patches to have their state updated to `Merged` with a `git push`
to the default branch.
Currently, due to the limitations of the COB store, this requires a
linear search through all patches. This will eventually become a problem
when projects have thousands of patches, so we should look into
long-term solutions.
'git pull' in workflow/6-pulling-contributor causes a message to be
emitted for some git versions. It asks to configure 'git pull's default
action.
Use '--ff' as a workaround as a git config file is unsupported, and no
environment variable exists for this configuration.
cloudhead
Fintan Halpenny
Fintan Halpenny
Lars Wirzenius
dietrich ayala
Alexis Sellier
Slack Coder
Michail Zampetakis
xphoniex
Sebastian Martinez