Add the `--revision` option for `rad patch checkout`. This allows the
user to specify a particular revision of the patch to checkout. If the
revision is not specified it will use the latest revision of the patch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add the `--name` option to `rad patch checkout`. This allows the user
to name the branch they are checking out, rather than use the
`patch/<short-id>` format.
This change includes returning early for setting the upstream branch,
if the upstream already existed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Add a `--force` flag to forcibly checkout the branch to the latest
revision, if the branch already exists.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Currently, if refs are updated while the node is stopped, these refs are
not immediately announced when the node starts, due to the node being
unaware of the updates.
To remedy this, on startup, we compare the refs we have in storage with
the refs we announced to the network. Since only our own refs could have
changed while the node was stopped, this change only applies to owned
refs. If we detect that storage has changed while the node was stopped,
we create ref announcements for the updated repos and store them in our
gossip database. These announcements will be included with other
historical gossip announcements when nodes connect to us.
To keep track of what was announced, we store our local node's sync
status in the database. This is also useful when using the `rad sync status`
command, as it tells us what oid our local node is at, and whether it
is aware of our local changes yet.
In addition to this, we make a small fix: previously, inventory and ref
announcements originating from our local node were not stored in the
announcement database. We ensure that they are via the new `announce`
method.
This command shows the sync status of a repository by consulting the
database via the node.
To make it work, we call into the address store to update the
`repo-sync-status` table when receiving ref announcements that are
relevant to us.
An informational message for the protocol is useful for sending
messages to a node that is not required to be relayed.
This message is introduced by starting with an ACK message for a set
of references being synced. This fixes an issue for announcing to a
node that is already synced, since it can now ACK that it received the
message and replies that it is synced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It can be useful to return the `RefsAt` that was announced for this
node, for example, to compare it to node events.
Change the `Handle` method to return `RefsAt` so that when it is
called it returns the local node's `RefsAt`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The fetch V2 improvements introduced a `UserInfo` type that is used to
set the Git config's name and email when cloning a repository. This
`UserInfo` can also be used when creating a new `Repository`.
The `Storage` type now takes a `UserInfo` so that it can be passed to
`Repository::create`, for creating a new repository.
For testing, this requires adding a new `fixtures::user` so that
testing `Storage` instances can be easily constructed.
It also means that the `radicle-cli` tests all changed with new SHAs
since the name and email are used as part of the hashing input.
N.b. the order of the timelines while testing the identity cob
changed. It's not clear why that is.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This makes the divergence check on push slightly more lenient, by
allowing rolling back to a previous commit in the canonical branch
history.
Without this, it can become impossible to roll-back commits in certain
situations.
With the latest changes to fetching, `--scope all` will now clone all
remotes listed by the serving node.
Simplify by the `rad-clone-all` example by removing the extra fetch
and removing the corresponding TODO.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Wire up the `radicle-fetch` crate to the fetch logic in the
`radicle-node` worker.
Any required traits for storage, identity, tracking, and transport
used by `radicle-fetch`.
The worker adds a new module to run the `git upload-pack` process and
pipes the `stdout`/`stdin` to the respective channels.
The `Worker` type required adding a `FetchConfig` to easily allow the
configuration of fetches and passing the signer and tracking store
location through to the fetch `Handle`.
The channels code is adapted to have a new writer that always flushes
when a call to `write_all` is made. This is necessary since the
Gitoxide code never calls `flush`, and so it will hang since no data
is sent until `flush` is called.
Since `UserInfo` is used to set up a newly cloned repository, this
changed some of the SHA1 hashes output in the CLI test examples. It
was also necessary to update the CLI's clone code to be deterministic
in its output for tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This change allows users to track/untrack peers and repos without a
running node. This fixes a bug when running `rad init` without the node
running, where the repo would be tracked with a different scope than
what was specified on the CLI.
The `rad patch checkout` command would blindly create a branch when
being executed. If there was a branch already existing and user had
committed to that branch, switched without updating the patch, and
then switched back, then they would lose the commit on that branch --
the original commit of the patch would be taken instead.
Fix this by first checking if the branch existed beforehand, and
setting the workspace to use that branch's commit.
Add a test to ensure that this works as expected.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When specifying a `patch.base` to point to for stacking patches, it's
useful to accept any kind of revspec, e.g. `HEAD^`.
Change the argument parsing to use the `Rev` type instead, and change
the `rad-patch-ahead-behind` to use `HEAD^` to test the example usage.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
When testing the CLI, "since"-calculations will result in different
values over time:
now
1 month ago
2 months ago
10 months ago
1 year ago
10 years ago
Initially, the solution was to use the wildcard match from `snapbox`,
`[..]`, to match on these values. However, since these values change
in length it means that they will affect the width of the tables
produced by the CLI.
To ensure the width is stable across runs over time it's possible to
use a time that is the same as the commit time used at testing.
To do this the `Timestamp` type is now a newtype which has a
constructor `now` which will use the `RAD_COMMIT_TIME` env variable
for construction, if it's available and in debug mode. This ensure
that all "since"-calculations will result in `now`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Introduces a new COB type to store repository identity documents.
The reason for this change is to:
1. Simplify the code, as the identity document logic resembled a COB,
yet it had custom logic. This allows existing COB code to be used for
identities.
2. Make identity document update logic more flexible, since COB actions
can be added in the future.
3. Re-purpose existing tools around COBs to work on identities, eg. `rad
cob`.
4. Unify the concept of an identity change proposal, with regular identity
changes. This means we can remove the `id.proposal` COB in favor of
using the `id` COB itself.
Notes
-----
* Each repository has one Identity COB.
* The `Proposal` COB has been repurposed into the `Identity` COB.
* Identity documents are stored as *embeds* inside the Identity COB
actions.
* The action that contains new document versions is called `revision`,
just like the Patches COB.
* The namespaced `rad/id` ref is a symbolic reference to that Identity
COB.
* The canonical `rad/id` ref is a direct reference to the commit in the
Identity COB that contains the latest *accepted* revision of the
document.
* All commands for managing identities have been folded into `rad id`.
Hence `rad delegate` and `rad edit` are removed.
* The concept of "rebasing" an identity document is gone.
* The `rad id` output has been updated to match the style of other
commands.
* When a revision has enough signatures, it is automatically adopted as
the current identity, there is no longer the need for a "commit"
action.
* When an identity revision is proposed, and the current identity has a
threshold of `1`, that identity is automatically accepted due to the
above point.
* The idea of "verifying a peer's identity branch" no longer applies, as
COBs cannot be verified one history at a time.
* Since the root commit of the Identity COB does not have a "Resource"
to point to (it would have to point to itself, which is impossible),
we've made the resource id optional for COBs.
The `Element::render` function now takes a constraint object. This
allows the parent element to influence how the child is rendered. This
is useful eg. to have elements take up more space than they need to fill
some space.
We also make various changes needed for pretty diffs, such as merging
styles, a new `Filled` type, and some color theming.
Changes the behavior of `git fetch` by running a radicle network-level
fetch (ie. `rad sync --fetch`) before fetching refs from storage. This
avoids having to run `rad sync` before `git fetch`; and tries to make
sure that refs are always fresh.
As a delegate, you shouldn't be able to delete your default branch.
This would most likely happen by mistake, and it prevents the canonical
head from being calculated correctly.
On push, we check whether the resulting state would cause a
divergence/fork in the canonical head, and if so, prevent the push from
happening.
This is to avoid situations where delegates have to then rollback their
heads.
Note that this doesn't prevent forks from happening altogether, as they
could happen asychronously, but it mitigates the problem.
The `Patch` API and semantics are changed a little bit:
* It's now valid again to propose a revision without being the patch
author.
* To get revisions by the patch author, `Patch::updates` is used.
* `Patch::latest` now only looks at revisions by the patch author.
* Added `Patch::revisions_by`, `Patch::authors` and `Patch::latest_by`.
* The merge behavior on git-push is improved to favor revisions that
merge more recent commits. We also allow for merging the non-latest
revision.
When `rad issue show` is run, the issue comments are shown by default.
This can be tweaked using the `--format` option. A value of "header"
only shows the header, while the default which is "full", shows the
header and comments.
This allows a user to choose private or public visibility on `rad init`.
It also improves the output to tell the user what happened due to this
choice.
It didn't make sense to get eg. `Patch failed` when listing patches
failed. We change all fatal errors to simply "Error:", giving more
control over the individual commands.
After cloning, we show a cool little summary with some repo stats.
We had to make some adjustments to the way visual width is calculated
due to a bug surfaced around emoji width calculation. Unfortunately
there isn't a perfect solution that works across terminals yet, so the
"variation selector 16" code-point is filtered out for now.
When a fetch is user-requested, a timeout can be supplied that is passed
down to the worker.
When a fetch is service-requested, a default timeout is used.
This adds functionality so that on `rad sync` and `rad clone`, we
connect to known seeds if necessary, before attempting to fetch.
In passing, some related changes were made:
* The `rad sync` command's arguments were reworked:
`--replicas <count>` can be used to specify a replica count when
fetching
* The `rad patch` command no longer has a `--fetch` option
* It's now possible to tell the node not to automatically connect to
peers in the background
* `AddressBook` is being used underneath `Seeds` to allow for shuffled
iteration
Only return once the connection is established or failed.
It's still not perfect, as several failure scenarios are not handled,
but it's an improvement.
> I'm going to be making a set of breaking changes to COBs in order to
stabilize the data formats. This is hopefully a one-time change that
bundles various breaking changes.
All COBs have been reworked: issue, patch, id.
The changes included are:
* Revise the assign and tag actions to take a single list of
assignees/tags to set, instead of an "add" and a "remove" list. This
makes API usage simpler when editing issues, and simplifies the apply
function
* Rename "tags" to "labels", and the tag action to label. This is
because tag is confusing in the context of git, as it could mean a git
tag. Using label removes that confusion.
* Use DIDs instead of PublicKeys for assignees -- this is more
future-proof
* Modify the manifest file format in the COB tree. Mainly, remove the
`history_type` key which is redundant, and use camelCase for keys
* Flatten the `Thread` actions into the parent action type
* Ensure that operations on redacted objects do not fail, since
redactions could have happened concurrently
* Use a consistent naming scheme for actions, using `.` as separator
* Consolidate comment types and remove `CodeComment`, by adding an
optional `location` field to `Comment`
* Add many placeholder actions that are not yet implemented
To preserve backwards compatibility, a `legacy` module is created with
the old `apply` function. When loading the manifest, we check whether it
is a legacy COB or a "stable" COB, and in the legacy case, use the
legacy code to materialize the state and then convert the object into
the stable type. Eventually, we'll delete the legacy code.
Some of the old patches had missing objects and that causes problems
during the ref advertisement, as the object is not found.
In this patch, we check that the object exists and also that the patch
is still open. Otherwise a remote tracking branch is created for every
single patch ref.
If you accidently merge updated patch code before updating the patch in
storage, you end up in this weird state where you can't update the patch
any longer. This fixes it.
This is a fairly substantial change, which adds a new configuration file
to the user's `$RAD_HOME` that includes node configuration, including
the alias, and also makes node aliases required.
When running `rad auth`, the user is now prompted for an alias, which
defaults to `$USER`.
When running `rad self`, the alias is now shown.
If the user runs radicle without a config file, the defaults are loaded,
and `$USER` is used as the alias.
* Add `--home` flag
* Organize the information better
Now looks like this:
DID did🔑z6MknSLrJoTcukLrE435hVNQT4JUhbvWLX4kUzqkEStBU8Vi
└╴Node ID (NID) z6MknSLrJoTcukLrE435hVNQT4JUhbvWLX4kUzqkEStBU8Vi
SSH running (823)
├╴Key (hash) SHA256:UIedaL6Cxm6OUErh9GQUzzglSk7VpQlVTI1TAFB/HWA
└╴Key (full) ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHahWSBEpuT1ESZbynOmBNkLBSnR32Ar4woZqSV2YNH1
Home [..]
├╴Storage [..]/storage
├╴Keys [..]/keys
└╴Node [..]/node
Remove most of the user-friendly functionality and simplify this command
so that it is only used for scripting.
`git push rad` is now the proper way of updating patches.
We consolidate the setup done by `rad checkout`, `rad clone` and `rad
remote add`, so that they all check for node aliases, and are all
capable of setting up tracking branches etc.
Remove this command in favor of the `git push` flow.
We also remove the `rad/patches` remote configuration which wasn't
working properly with `git fetch --all`.
Help the user when creating a patch by listing the messages of all
commits associated with the patch in almost the same format as git uses
for squashing.
Allows for setting a patch message during a push. Eg.:
$ git push -o patch.message="My Title" -o patch.message="My description" \
rad HEAD:refs/patches
Works the same way as the `-m` flag of `git commit`.
When applying a `Merge` action, we verify that the commit is in the
history of the default branch of that user.
Since this is not the case when issuing a `rad merge`, and since that
command is no longer needed with the push-based merge, we remove the
`rad merge` command completely.
Allows patches to have their state updated to `Merged` with a `git push`
to the default branch.
Currently, due to the limitations of the COB store, this requires a
linear search through all patches. This will eventually become a problem
when projects have thousands of patches, so we should look into
long-term solutions.
'git pull' in workflow/6-pulling-contributor causes a message to be
emitted for some git versions. It asks to configure 'git pull's default
action.
Use '--ff' as a workaround as a git config file is unsupported, and no
environment variable exists for this configuration.
This adds the ability to the git-remote-helper to open and update
patches via a `git push` to the magic ref `refs/patches` and
`refs/heads/patches/<patch-id>`.
The main change is that we had to move away from offering the `connect`
capability in the remote helper, to offering `push` and `fetch`
individually.
To get a feel for how this works, see the `rad-patch-via-push.md`
example.
This change updates to the latest radicle-git-ext, which required a
few changes within the radicle family of crates.
One set of changes is that the radicle-git-ext crate subsumes
git-commit, git-trailers, and git-ref-format -- so all those imports
go through radicle-git-ext.
The commit code requires that parent `Oid`s point to commits, which
made some tests fail. One of the reasons for these failures is that
the patch tests used fabricated `Oid`s and so the verification would
fail. This is fixed by allowing the test context code to create
`PatchRequest`s that create valid commits.
The other reason for failure was that the identity `Action` passed an
`Oid` that pointed to a blob. This is fixed by removing that code and
making a note of it in documentation.
The final major change was moving the Refspec type into git-ref-format
and removing the AsRefspecs trait. The trait was not required and
could its usage could be replaced by simpler code.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the 'rad' remote is still in the git config, then some of the CLI
tooling will think the project exists -- even after running `rad rm`.
For example, in the current state, if `rad rm` is followed by `rad
init` then the operation will fail.
During `rad rm`, attempt to delete the 'rad' remote.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, `rad rm` would require the node to be running to untrack
the repository.
This is no longer necessary since the tracking db is exposed via the
`radicle` crate. Instead, use the db directly to untrack the RID
during `rad rm`, as long as the node is not already running.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Avoid having ssh-agent a hard dependency of `rad-auth`.
Only add the user's key in `auth::init()` to ssh-agent if it is running,
instead of exiting with error.
For `auth::authenticate()` which is used to authenticate the user with
Radicle, assume using `RAD_PASSPHRASE` is a fallback authentication
method. If ssh-agent is not-detected, verify the RAD_PASSPHRASE is
present and correct. Treat neither being present as an error.
Support this by clarifying on `ssh::agent::connect()`s error which are
due to it not being present.
This change ensures that we include as a parent to the initial commit
of a patch COB, the head of the branch we are proposing as a patch.
This was already happening for patch updates, but we forgot to also
include it for the initial patch revision.
This ensures that the code is always fetched alongside the patch.
When tracking a repository with the `--fetch` option, we run a fetch
once the tracking is done.
When tracking nodes, we don't accept the `--fetch` flag, as there may
not be a repository to fetch.
Instead of `Node::announce_refs`, we call `rad sync` to have the
terminal block while waiting for nodes to fetch the changes.
We also change the use of `git push` in the patch command to not
trigger syncing in that case.
This command announces refs to peers and waits for them to be
in sync.
Adds a subscribe method to `Handle` so that we can get the events
from the seed to allow us to confirm that the configured seeds fetched
from us.
By mapping all '[.. ]'s with any number of spaces inside them into
'[..]'s, examples can preserve text formatting while using this glob
pattern.
The downside is failed output will show '[..]' in place of the original
version with spaces.
* Properly remove review help message from review
* Remove `--no-confirm` and confirmation step
The CLI should be mostly non-interactive for day-to-day commands,
keeping the interactivity for the TUI.
When a merge is applied to a patch, we check whether the threshold
of delegates has been reached, at which point we set the patch status
to `merged`.
This requires threading the identity document oid through the "apply"
process.
Revision IDs are globally unique. Users will be able to use the
Revision ID in place of its patch ID.
Make `rad merge` refuse to merge an older revision unless the `--force`
option is given.
This commit allows any git revision to be used instead
of the full SHA-1, when specifying COBs.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We implement a new `Element` trait which allows for more complex output
to be drawn, such as vertical and horizontal stacks.
We adapt `Table` to work within this system.
We refresh the output of `rad patch show` to use these new tools.
Make the documentation more realistic by using two peers, a maintainer
and a contributor, for the client examples. Define them as 'workflow'
examples, ordering them in their own directory to aid user navigation.
Correct assumptions made about how patching work in `rad patch`. Make
the default Patch target a `git ref` in place of a target 'peer'.
Use the canonical head as the git reference. This is head of the
project's master branch which project delegates have concensus on.
By introducing a small limitation: only allowing entries in the change
graph to be addressable, instead of individual operations; we
drastically simplify the CRDT implementation.
There are four advantages:
1. Op ids are just regular SHA-1s
2. There's no need for relative IDs, ops never refer to other ops within the
same commit
3. There's no need for a nonce, since commits can't collide, and neither can op IDs
4. `OpId` can just be an alias of `EntryId`
The disadvantage of course, is that we have to be mindful of how we
create op transactions, since each transaction creates an addressable
unit. For example, we must not include multiple patch revisions in the
same transaction.
The method `track_repo` only accepted the RID as the argument for
tracking.
Instead, allow passing Scope as an argument for tracking a
repository.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
It's fairly easy for a user to (by mistake or intentionally) create two
operations with the same OpId. This patch makes it much less likely,
and ensures that if the OpId is equal, it's because the operations
are identical.
Improvements to the CLI output as well as converging towards
`termion` as a backend.
The crates we were using for prompting and spinners were based on
a terminal backend called `console`, which is not really used
anywhere else. There were also limitations in terms of the output
of these crates.
Therefore, we switched to the `inquire` crate for prompting, using
the `termion` backend, which is very standard.
Additionally, we simplify the terminal output to use symbols:
! for Warning
✓ for Success
✗ for Error
... Instead of a mix of words and symbols.
We also include a modified version of the `yansi` crate which plays
well with our table formatting functions by automatically truncating
and padding output in a unicode-aware way.
The `From` implementation would allow someone to create a `Home` in an
incorrect fashion, for example the path is not canonical.
Exchange `From` for a `TryFrom` implementation.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of showing just public keys we need to show the fully qualified
spec for a NID which is prefixed by `did🔑` While we want to maintain
`Author` and `ActorId` for internal use.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
The CLI commands and output use PublicKey, ActorId, and NodeId for
peer identifiers.
Instead Did should be standardised for use in CLI arguments and
outputs.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This commit allows to checkout a patch created
with `rad patch open` in a new branch
named `patch/{short_patch_id}`.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This commit includes a simplification in finding the
long patch id in order to perform operations like
`patch show <id>` and `patch checkou <id>`.
Actual output
```
➜ rio git:(main) rad patch list
- YOU PROPOSED -
patch text 8c94760699e R0 f1b2740 (macros/rad_patch) ahead 1, behind 0
└─ * opened by z6MkuvfwAkZ6yD6Z5TT6YXfJjFNPMQz9fPi9BSU7gwhS9s2x (you) 12 minutes ago
└─ * patch id 8c94760699e3e2da64aa9f14f4d2cecfe7b754ad
patch text 78e0fb5ad45 R0 f1b2740 (macros/rad_patch) ahead 1, behind 0
└─ * opened by z6MkuvfwAkZ6yD6Z5TT6YXfJjFNPMQz9fPi9BSU7gwhS9s2x (you) 24 minutes ago
└─ * patch id 78e0fb5ad45481d225a6fb45f51422e468b55c94
- OTHERS PROPOSED -
Nothing to show.
```
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Add the resulting SHA of the new Identity when performing `rad id
commit`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
The last commit of a newly cloned repository should remain untouched by
making `Node::project()` use a repository fixture instead of a randomly
generated one.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Simplify codebase by splitting patch::create::run() into patch::create::run() and
patch::update::run().
Patch has the subcommands `create` and `update` but both use the same
method to do the heavy lifting. Spitting the code allows us to detangle
the code path making it easier to follow.
Also, reduce cognitive load by minimizing the amount of variables used
and isolating them to utility functions. For instance, `head_branch` can be passed to
these methods instead of `head_oid` and `head_branch`.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Define git author name and email address, and others to allow using it
deterministically in documentation tests.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Use '-'s to avoid trailing spaces on items when listing patches.
The spaces are used as part of the format with colouring. However they
are a nuisance to support in testing given the autoformatting of editors
to remove them.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Make `rad patch` accept subcommands for specifying its operation in
place of the '--command' notation.
For instance `rad patch update` versus `rad patch --update`. Also make
the default operation list active patches, replacing patch creation.
Patch creation is now done via `rad patch open`.
Make these changes in a way consistent with other commands like `rad
delegate`.
Add '--no-confirm' to patch to support this subcommand's documentation
test.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Change `OperationName::Create` to `OperationName::Open` and change the
command argument to reflect this.
Signed-off-by: Slack Coder <slackcoder@server.ky>
Fix order of iteration, and make output look more like commit log.
Also show commit parent and message.
Signed-off-by: Alexis Sellier <self@cloudhead.io>
cloudhead
Fintan Halpenny
dietrich ayala
Lars Wirzenius
Alexis Sellier
Slack Coder
Michail Zampetakis
xphoniex
Sebastian Martinez
Vincenzo Palazzo
Adam Szkoda
Alexis Sellier