For distribution of Radicle on Windows machines, Windows Installer
provides a well-known solution, that comes built in to the operating
system. It also integrates with the Windows package manager WinGet.
Provide an initial version of an `*.msi` build, and integrate it into
GitHub actions to allow downloads via build artifacts.
Report: <https://www.cve.org/CVERecord?id=CVE-2026-25727>
The `time` crate was a transitivie dependency of `human-panic`.
Updating `human-panic` to 2.0.6 removes the `plist`, and in turn,
`time` dependencies.
Report: <https://www.cve.org/CVERecord?id=CVE-2025-58160>
This vulnerability was introduced via the `test-log` crate.
Updating to `0.2.19` in turn updates `tracing-subscriber` to `0.3.22`
which is in the acceptable upgrade range.
Using empty `Vec`s to mean "all refs" can be confusing. Avoid the chance
of confusion by introduction of a new type that clearly describes which
refs should be fetched.
It was found that if a fetch was started for a specific `Vec<RefsAt>`
and a following general, i.e. empty, `Vec<RefsAt>` was queued, the
subscriber for the general one would be removed when the specific
fetch completed.
This behaviour is undesirable, since the general fetch could
potentially fetch more data.
To prevent this from happening, the `Vec<RefsAt>` is added to the
`FetchKey`, so that `subscribers` are matched with the set of
references they want to hear results for.
A test was added for the above scenario.
When decoding an input string for a `RepoId`, the base was never checked.
This change ensures that the base is checked and will error otherwise.
To allow for future base codes, the change introduces a sanctioned set
of base codes, which only contains `Base58Btc` for now.
Tests are added to ensure that parsing is correct and includes a valid
multibase code 'Z', which is not the expected 'z'.
Recent versions of Windows support Unix Domain Sockets natively, see
<https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/>.
By using that feature instead of Windows named pipes, the difference
for handling communication via the control socket comparing Unix-like
systems and Windows becomes smaller:
1. No special paths like `\.\pipe\…` have to be handled.
2. Not two I/O mechanisms are abstracted (named pipe and UDS) but
just one.
3. `winpipe` relies on background threads while `uds_windows` does
not.
Once the feature `windows_unix_domain_sockets` (which is tracked at
https://github.com/rust-lang/rust/issues/150487) stabilizes, it will
likely be possible to just drop the dependency `uds_windows` and use
the implementation in `std::os::windows::net` directly.
The paths checked by `fn exists` are well-known Unix locations, and not
meaningful to check on Windows.
Provide an implementation of `fn exists` for Windows, which uses
`which.exe` to look for binaries, and use that to provide sane defaults
for Windows.
Git for Windows horribly mangles the configured binaries through a POSIX
`sh`-like environment even on Windows. We might be able to figure out
which `sh.exe` we would have to execute on Windows, but this is too
brittle. Windows users will have to use other mechanisms (like `$EDITOR`
and `$PAGER`) to configure their programs.
Command line parsing differs on Windows vs. POSIX compliant operating
systems (just consider the differences in handling `\` for paths vs. as
a marker for escape sequences). Thus, on Windows use `winsplit` to
split command arguments instead of `shlex` for Unix-like OSes.
`winsplit` is a small crate with no other dependencies.
The devShell now uses rust-analyzer from the tool chain. Previously,
using the nixpkgs rust-analyzer (from an older rust version) led to
inaccurate results.
Domain Names have restrictions on their total length, and the length
of individual labels[^0].
Since `TypeName`s are expected to be reverse domain name strings, the
total length of the internal string should not exceed 255 and each
component should not exceed 63.
[^0]: https://www.rfc-editor.org/rfc/rfc1035#section-2.3.4
The test name being used is `valid_typenames`, however it tests for
invalid `TypeName`s as well.
The invalid `TypeName` tests are now separated into another test
called `invalid_typenames`.
Enable the sha1 feature by default for `radicle-oid`.
Without this, the crate cannot be tested in isolation. It results in a
compile error, requiring the feature to be enabled.
Wire up the new `FetcherService`. This reduces the `Service` fetch
methods down to:
- `fetch`
- `fetched`
- `dequeue_fetches`
- `fetch_refs_at`
This simplifies the code by off-loading the logic to the `fetcher`
family of types, rather than handling the intricacies in the `Service`
itself.
The `Service` now just performs the necessary I/O based on the
returned events from the `fetcher`.
This also removes the fetching state from the node sessions. This
follows the single responsibility, and sessions now only care about
their connectivity.
Breaking changes:
- The `Connected` state of a peer no longer contains fetching
information, which was being returned as part of the JSON payload
result.
- The `rad debug` information for ongoing fetches contained the number
listeners awaiting for results, this was removed.
The `FetcherService` wraps the `FetcherState` alongside keeping track
of subscribers for a given fetch.
Typically, this is a channel for which the fetch result should be sent
to.
These subscribers are coalesced by maintaing a map from `(rid, node)`
pairs to the subscriber.
This continues the sans-IO approach where the type of subscribers are
not specified, but rather are kept as a type parameter – to be
specified by the caller.
This patch introduces the `FetcherState` which encapsulates the logic
and state for keeping track of fetches.
It uses a sans-IO approach, where the state of fetches transition
based on the current state and provided input.
Callers can then decide to perform I/O based on the returned event.
The `From<String> for Message` implementation has an interesting
interaction between `clap` and how `Message` can be used from the
command line.
Note that `FromStr` is not implemented for `Message` – which usually
what is to be expected for use with `clap`, but in fact, `clap` also
allows `From<String>`.
This would make `Message` be a required option when using `rad issue comment`.
It is not possible to use `default_value_t` because that required an
implementation of `Display`, which in this case we do not want to
implement. Trying to use `default_value = "Message::Edit"` also would
not work – it uses that as the text.
So, the solution is to mark it as optional, and default to
`Message::Edit` when it is not specified.
Be more defensive by preventing a node, that is not configured for
Tor, to not connect to `.onion` addresses via the `Service::connect`
method.
This means that an `Outbox::connect` should not be produced, and the
address table should not insert an entry.
When maintaining persistent connections, the config was consulted for
a peer address. Multiple addresses for a single `NodeId` can be
listed. This can result in a different address being used for
reconnecting if the `HashSet` returns in a different order.
The original address that was used for connection is in the `Session`,
so this should be used instead.
This command is confusing in name and function. Rather than creating
a hard fork of a repository, with a new identity, it pushes the
default branch to the local user's namespace.
Deprecate it and add some help text.
When a non-delegate attempts to update the identity document, their
action will be rejected.
Provide a better error, along with a hint, to the non-delegate.
Changes the `Error::WithHint::hint` field to use a `String` type instead of
`&'static str`. This allows the caller to provide extra hint
information.
To make it easier to use an `Error::with_hint` constructor is added.
Lorenz Leutgeb
Lorenz Leutgeb
Fintan Halpenny
Aaron Würth
srestegosaurio
Defelo
Adrian Duke