When running `rad patch list`, show the set of delegate reviews for
each patch, with the following meaning for the symbols:
- ✔: delegate has accepted the patch
- ✗: delegate has rejected the patch
- -: delegate has not made a verdict on the patch
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If the user passes a <path> argument to init, it is incorrect and a
bit confusing to reference the "current directory" or "this directory"
e.g. "run rad . in current directory" when the repo was not created in the
current directory and was created with a path argument instead.
Use the path provided by the user in help text, otherwise reference
the current directory.
If `rad id` is called with no arguments, or just `--title` and
`--description`, then it will fail because there were no changes made
to the identity.
Check if the `proposal` document is the same the `current` document,
and if so supply a hint and a better error.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Help the user know which revision they currently have checked out when
running `rad patch checkout`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
If an ancestry check of an annotated tag was triggered then the fetch
from that peer would fail. This is due to `graph_ahead_behind` only
working for commit-ish objects.
To allow for annotated tags, and other object that peel to commits,
the check now peels the two objects to commits before getting their
`Oid`s. The call to `graph_ahead_behind` can take these two `Oid`s
instead.
A test for annotated tags is included as part of the `examples/git`
suite in the CLI tests.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
No tests for `rad patch delete` existed.
Add a test where two peers interact on a patch and one decides to
delete the patch. It ensures that the patch is still visible to the
peer that did not delete the patch.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To make things a little more consistent, move the `rad self --address`
command to `rad node config --addresses`, since it's more about
externally-facing configuration of the node, rather than your local user
or profile.
Previously, authorization was only checked for ops after the root op.
We also avoid creating empty actions for `assign` and `label`, which
was needed for non-authorized users to be able to create issues/patches.
This makes the default policy `block` with scope `all`. The good thing
about this is that you don't have to manage individual nodes in the
beginning. You simply seed the repos you want, and everything is
followed within those repos. This matches user expectations, as `rad
seed` does what you expect it to do.
For open-policy seed nodes, it also means that simply changing `block`
to `allow` from the default config is all you need.
This leaves the non-default `followed` scope as a more "advanced"
setting, since it is much more cumbersome: it forces you to follow a
user before you can see their issues/patches, which is not something
most users expect coming from old-shcool forges.
Shows you updates on local repositories.
Included here is a basic implementation of a notification system. A new
database is created and updated after every fetch, with refs that have
changed.
The `rad inbox` command can then list items in the database and delete
them.
When using `network: "test"`, we shouldn't default to any public seed
node. This change makes sure that the "preferredSeeds" configuration var
is only given a value when `network` is `main`.
The command now works with both a replica target *and* a seeds target.
This is especially useful to eg. ensure that a preferred seed has been
synced, while still trying to hit a higher replica count.
Introduce pinned repositories to the `profile::Config`, i.e.
`config.json`.
This is used for pinning repositories in the httpd `/projects` handle.
To allow returning all repositories, an `all` query parameter is also
included.
This is non-backwards compatible change, since we introduce the `show`
query parameter which, if not supplied, will default to `pinned`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
In the case where we don't find any seeds, display a better error
message.
We also don't bail out on error, since the announcement step might still
be worth trying.
Previously, COB change commits would not distinguish between their
parents. This means that they would try to load source code commits
(eg. for patch COBs) and then fail since those commits wouldn't have a
manifest or `Rad-Resource`.
We introduce a backwards compatible change here which is that parent
oids that are not COB commits are accompanied by a commit trailer called
`Rad-Related`. This is for all related content that should be pulled in
but is not part of the change graph proper.
When building the change graph, we simply ignore commits that are marked
as "related".
We were using the two pretty interchangeably. "Project" should only be
used to refer to the repository payload. "Repository" should be used
when referring to the resource that is fetched, synced, cloned, checked
out etc.
Add a test to show the behaviour of setting up 3 delegates, through two
seed nodes -- ensuring that commands are still operational after
accepting a delegate that the node is missing.
The two seeds are setup with two different scopes:
- `Scope::All`
- `Scope::Followed`
This is to show that the network has eventual consistency once there
is a way to fetch any other node's fork in the network.
The setup of the test is:
- Alice adds Bob as a delegate
- Bob adds Eve as a delegate
- Alice accepts Bob's changes
Alice is able to get Eve's fork through the `Scope::All` seed. The
`Scope::Followed` seed will then be able get Eve's fork once any other
node syncs with it, in this case Eve.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
We cannot guarantee that the `rad sync status` will run before all the
nodes are synced.
Remove the call to `rad sync status` and explain that at least 1 of
the nodes will be synced.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To allow `rad sync` to break early from the call to `announce`,
control flow is introduced for the callback.
In `rad sync`, the number of synced nodes is checked against the
`replicas` -- if specified -- and sends a `Break`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Previously, the head of the opened patch would not be displayed, and
so the user could not tell what it was if any updates were applied.
Show the head for the opened revision. The below shows the difference
between before and after, respectively:
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
```
├─────────────────────────────────────────────────────────────────────┤
│ ● opened by z6MknSL…StBU8Vi (you) (8b0ea80) now │
│ ↑ updated to 8d6692ce2b2219a54d09ccd5feefedb2bae33eba (02bef3f) now │
│ ↑ updated to 8438ab3940316abe65c93982a0a8f39688400359 (9304dbc) now │
╰─────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Allow `rad patch edit` to take a `--revision` option which will edit
the description of the specified revision, rather than the root
revision.
If the flag is not specified, then the original behaviour of editing
the root revision's title and description is used.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Instead of having a timeline of a patch be global and sorted by
timestamp, organise it via revisions. Each revision has an entry in
the timeline, sorted by timestamp. Under each revision, a series of
updates are inlined, also sorted by their timestamps. Currently, these
updates can either be reviews or merges.
For example:
```
├────────────────────────────────────────────────────────────────────────────┤
│ ● opened by fintohaps (you) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ ↑ updated to 5f2a123e3f2aa60f2e03815df283563495b73085 (a1c3c0f) 1 week ago │
│ └── ✓ accepted by fintohaps (you) 1 week ago │
│ └── ✓ merged by cloudhead (z6Mkt67…v4N1tRk) now │
╰────────────────────────────────────────────────────────────────────────────╯
```
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
By default, this command now:
* Follows the peer if not already followed
* Syncs refs of the peer, if it wasn't followed before
* Fetches refs into working copy
This functionality can be disabled via `--no-sync` and `--no-fetch`.
Add functionality for lising the remotes that are in the storage
repository, but a working copy remote has not yet been created for
them.
This functionality is included in the `rad remote` command since it
can be directly used for creating Git remotes using the same command,
i.e. `rad remote add`.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
To keep behaviour consistently under subcommands, move the `rad node
seeding` behaviour under `rad seed`. When an `<rid>` isn't
provided then the seeded repositories are listed.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
Fintan Halpenny
josibake
cloudhead
Alexis Sellier