8347c3bdcd
Standard interface for SPI peripherals
2024-06-21 18:00:33 +02:00
f2c0f2cc90
Standard interface for I2C peripherals (MCU side)
2024-06-21 18:00:33 +02:00
e53e110a3b
Reorganized and extended the gpio peripheral API
2024-06-21 18:00:33 +02:00
70f0ce45d3
GPS: using 16-bit integers for course over ground
2024-04-10 19:12:34 +02:00
a17ad80f10
GPS: using 16-bit integers for altitude and speed
2024-04-10 19:12:34 +02:00
e4a62f30ee
GPS: using fixed-point 32-bit value for latitude and longitude
2024-04-10 19:12:34 +02:00
36ef3b310c
Added function to convert minmea coordinate to fixed-point integer representation
2024-04-10 08:04:26 +02:00
71b35985ce
UI: added string table for Spanish language
2024-03-19 18:26:38 +01:00
8550e4f7a6
Module17: renamed calibration fields for TX/RX baseband inversion
2024-03-13 08:37:04 +01:00
ed92d81543
Module17: implemented configurable logic levels for PTT in/out
...
See #248
2024-03-13 08:37:04 +01:00
6c8eaf7073
Module17: removed backlight timer
2024-02-06 21:11:46 +01:00
fdd08d4bcb
Module17: removed screen contrast setting, added screen brightness setting
...
Module17 uses an OLED display, which does not have contrast regulation. The
contrast control register, however, allows to change the brightness of the
display.
2024-02-06 21:11:41 +01:00
d119e7d1b2
Moved pixel framebuffer out of display drivers into graphics layer
...
Reorganized code for pixel framebuffer in order to have it instantiated once
and for all the possible display drivers. Dropped the display_getFrameBuffer()
function.
2024-02-06 19:19:47 +01:00
731054a131
Dropped display_renderingInProgress() function from display API
...
Removed display_renderingInProgress() function from display interface as it
has never been used so far.
2024-02-06 19:19:47 +01:00
c533c47103
Default UI: optimized layout_t struct and _ui_calculateLayout() function
...
Small optimizations to layout management code, saved around 132 bytes of
.text space.
2024-02-06 19:19:47 +01:00
d8c0ab1c44
Dropped support for 20kHz bandwidth
...
Dropped support for 20kHz bandwith in rtx code and radio drivers. This option
is supported only by MDx radios and so far is not being used at all.
2024-02-06 19:19:47 +01:00
44385b3b25
Using signed 32-bit data type for RSSI instead of floating points
...
Switched to int32_t for RSSI representation to allow running the code also
on devices with limited resources. Defined a new ad-hoc type to still keep
the possibility of using floating points on more capable devices.
2024-02-01 11:07:20 +01:00
963f402f1b
Graphics: using uint8_t instead of float for squelch and volume levels
...
Modified type of drawSmeter() and drawSmeterLevel() input parameters from
float to uint8_t.
2024-02-01 11:07:20 +01:00
49c99acf85
Utility function to strip leading zeroes from numbers in decimal notation
2024-02-01 11:07:20 +01:00
7b0ff04a2d
Graphics: removed 18pt and 24pt fonts
...
Removing 18pt and 24pt fonts from graphics layer since currently are unused
and take up flash space. On MD-380, removal freed up 12'928 bytes in the
.text section.
2024-02-01 11:07:20 +01:00
cb7b605251
Removed use of floating points when printing/announcing CTCSS tone frequency
2024-02-01 11:07:20 +01:00
5b3929ef44
Moved from float to uint32_t for TX power, substituted dBm with mW in CPS channel struct
...
General code optimization allowing to reduce the overall binary size, especially
for devices without hardware floating point support. On the MD-380 (which has the
FPU) the .text size has been reduced of 4'928 bytes.
2024-02-01 11:07:20 +01:00
dc930f4a4b
Added CONFIG_M17 macro to enable M17 support on each target
2024-02-01 11:07:20 +01:00
24c4a25b2d
Made "static" all the variables local to each translation unit
2024-02-01 11:07:20 +01:00
e54234f968
Renamed UI_NO_KEYBOARD macro to CONFIG_UI_NO_KEYBOARD
2024-02-01 11:07:20 +01:00
8bc867beae
Using Kconfig-style #defines for GPS, RTC and knob type description
2024-02-01 11:07:20 +01:00
0f4290cdfe
Using Kconfig-style #defines for display parameters' description.
2024-02-01 11:07:20 +01:00
598f1c4523
M17: deeply restructured the demodulator code
...
Restructured the M17Demodulator class and rewritten the
demodulator logic to have a more solid lock on the
baseband stream. This fixes the long standing bug of the
demodulator causing random losses of lock even when
receiving a solid baseband stream.
2024-01-27 15:15:37 +01:00
ddf889177c
Frame synchronizer class
2024-01-27 15:15:37 +01:00
3375d0b5d1
Correlator class
2024-01-27 12:17:07 +01:00
90cf0f6f58
Added reset() method to RingBuffer class
2024-01-27 12:17:07 +01:00
275ef16977
Added IIR filter implementation
2024-01-20 14:31:39 +01:00
2653ee01aa
M17: added callsign-based squelch for incoming transmissions
2024-01-10 19:03:48 +01:00
5ec0587c48
Added macro menu latching setting
2024-01-10 18:08:35 +01:00
b1fa154ad9
UI: renamed "Voice Prompts" menu to "Accessibility"
2024-01-10 18:06:48 +01:00
096da4102d
Utility functions to perform read/write/erase operations on NVM areas and partitions
2023-12-03 19:00:55 +01:00
070ed3de32
Device driver for file-based nonvolatile memory storage
2023-12-03 19:00:55 +01:00
d9b22c1d2d
Added function to retrieve the list of available NVM areas
2023-12-03 18:34:39 +01:00
7174246492
Standard interface for non volatile memory devices
2023-12-03 18:34:39 +01:00
5a0f92e23d
Add a volume bar in the bottom over the other bars
...
This will fix #190
2023-11-25 19:08:38 +01:00
91c0965007
Module17: made M17 baseband output have correct DC bias and amplitude
...
Removed an old workaround for an hardware bug of Module17 rev 0.1b limiting
the output swing of baseband signal in newer hardware revisions.
Contribution by Mathis Schmieder DB9MAT.
2023-11-21 18:46:03 +01:00
7dc2ca5524
Driver for random number generator peripheral
2023-11-02 18:36:07 +01:00
f43281e815
Display callsign on splash screen
2023-10-26 06:01:54 +02:00
1124c76b73
Added M17 destination to settings
...
# callsign in backed-up settings
2023-10-23 00:40:55 +02:00
17d5be118e
Enable frequency offset input from radio menu
...
Adapted callsign input to create a frequency input menu, that was used
to enable the input of a frequency offset from the Settings->Radio menu.
2023-10-16 21:50:03 +02:00
5d3c6c825d
Add radio settings for frequency offset, direction, and frequency step.
...
Add customizable frequency_step in radio state.
Offset is not yet selectable from Settings->Radio but only with keypad
from the VFO screen.
2023-10-16 21:49:56 +02:00
7e291fe6fd
Implement UI input lockout logic, toggled by macro menu key 9.
...
Contribution by tarxvf.
2023-10-16 21:46:37 +02:00
20b0c375aa
Change M17_orig to link and change callsign handling
...
This will swap the first extended callsign with the source callsign
if there is extended callsign data.
This allows to always store the true source in the M17_src variable
See #188
2023-10-13 09:58:34 +02:00
77e0ad27a0
Added support for 1750Hz squelch tone, implemented squelch tone in UV-3x0 radio driver.
...
When pressing the Hash key and the PTT key in FM mode
a 1750 Hz tone is transmitted
2023-09-22 13:58:59 +02:00
73bfc2a15d
Set proper thread stack size also when using the Zephyr RTOS
2023-09-22 13:57:33 +02:00
21895ae304
ttwrplus: disable Tx in menus
...
As T-TWR Plus reuses the PTT as a back button, thus we need to disable
PTT in menus. Also enforce rx_only logic from CPS.
TG-553
2023-09-20 21:16:40 +02:00
fe027c440c
ttwrplus: enable volume control
...
Replaced KEY_F7 and KEY_F8 with KEY_VOLUP and KEY_VOLDOWN.
Remapped the T-TWR Plus volume up and down keys to those, fixing a bug
in the pmu key detection where the wrong active edge was selected.
Adapt soft volume code for the UV3x0 to control code in the T-TWR Plus
by acting on the AT1846s Rx gain.
For target T-TWR Plus bound long press of KEY_VOLDOWN to macro menu open.
Unbound KNOB_LEFT and KNOB_RIGHT to squelch control and bound
instead KEY_VOLUP and KEY_VOLDOWN.
TG-553
2023-09-20 21:08:35 +02:00
ebc5910015
Renamed "bcd2bin" utility to "bcdToBin" to avoid conflicting with Zephyr includes
2023-09-20 21:08:35 +02:00
1a7d62fb42
Add UI and check for CAN on RX
2023-09-16 19:14:17 +02:00
8fe9837035
Implemented rxSquelchOpen() function for M17 opmode handler, returning true in case of valid stream data.
2023-09-12 17:47:49 +02:00
22afe0ecde
Port changes for M17 Call Info to module17
2023-09-12 17:47:49 +02:00
a3fbe34b30
Add symbols for M17 stream data display
2023-09-12 17:47:49 +02:00
a0f5d55cc1
Add M17 stream information to rtxStatus struct
2023-09-12 17:47:49 +02:00
3860894bff
Implement macro menu without keyboard
...
Adapt UI for radios that do not have a keyboard, add macro menu UI code
that can only use KEY_ENTER and KEY_UP, KEY_DOWN.
TG-553
2023-09-10 12:12:13 +02:00
d7578c4441
Refactor ui sizes
...
This changes line 3 to line 3 large and adds
two new lines, line 3 and line 4, similar to
line 1 and line 2
2023-09-04 15:12:18 +02:00
ffdc04be3e
`m17crypto_t` update
...
m17crypto_t now conforms to M17 spec
2023-09-04 12:24:05 +02:00
c9cd620530
Audio codec: added function returning the codec's current operational status
2023-08-30 18:04:25 +02:00
94fdd1090b
Refactoring and improvement of codec2 module
2023-08-30 18:04:25 +02:00
24208db609
New unified audio stream manager
2023-08-30 18:04:25 +02:00
adf88611f4
Changed codec_startEncode() and codec_startDecode() input parameter from an audio source/sink to an audio path
2023-08-30 18:04:25 +02:00
60b771b375
Added function to get all the informations of a given audio path
2023-08-30 18:04:25 +02:00
584dd356e2
Standard interface for drivers managing audio input and output devices
2023-08-30 18:04:24 +02:00
1011dd1081
Moved audio_stream.h from interfaces to core headers
2023-08-30 18:04:24 +02:00
278d7850c7
M17: add data structures for GNSS and extended callsign metadata.
2023-08-28 10:25:46 +02:00
ec57e74bc6
feat(ui): add tooling to generate symbols, add GPS status icon and macro latch icon to the macro menu
...
Ref https://github.com/OpenRTX/OpenRTX/issues/161
2023-08-24 09:32:01 +02:00
8399dcd3a3
Change macro latching behavior
...
Latch macro menu when macro button is long pressed
Unlatch macro menu when macro button is pressed again
2023-08-17 16:57:14 +02:00
c1a9db22b7
Made Brightness setting optional based on HW capabilities
2023-08-16 20:46:25 +02:00
4a6d0b4c2b
Change English string for M17 destination from Broadcast to ALL
...
This aligns with M17 Specification and other tools.
2023-08-16 20:45:36 +02:00
4cd1fdfcf3
Moved gpio.h to peripherals
2023-07-21 19:27:14 +02:00
28122a3bf3
Moved gps.h to peripherals
2023-07-21 08:32:26 +02:00
dcafd07085
Created "peripherals" include folder for non-mandatory drivers, moved rtc.h to peripherals folder.
2023-07-21 08:23:41 +02:00
009930f914
Moved get/set of current time to platform interface API
2023-07-21 07:58:29 +02:00
498f959798
Removed CPS flash backup and restore (actually unused) and hidden its UI menu entry
...
CPS flash backup and restore will be implemented via rtxlink/FMP, removed
current implementation which was never actually used. Code for backup and
restore UI menu entry kept for now.
2023-07-20 07:00:54 +02:00
65dde770e7
Changed return type of cps_readBankData() from "int32_t" to "int".
...
Made the return type of cps_readBankData() consistent with the one of
the other CPS API functions.
2023-07-18 23:04:31 +02:00
8019b29947
Moved the setBacklightLevel() API function from platform.h to display.h
2023-07-14 12:26:47 +02:00
313e9615a6
Removed platform_getCalibrationData() function because of limited usefulness.
...
Given that each radio driver loads its calibration data when initializing
and that the radio driver is strongly platform-specific, there is no strong
need for an intermediate redirection layer through the platform API.
2023-07-14 12:26:39 +02:00
f3f36fc2ae
Module17: quick and (very) dirty implementation of shutdown menu for hardware rev 0.1e
2023-06-15 08:16:53 +02:00
1afd868d64
Renamed "lcd_type" field of hardare info struct to "hw_version"
2023-06-14 21:30:52 +02:00
cadec3dfd4
Default UI: implemented setting of M17 CAN
2023-05-29 22:12:40 +02:00
2f0d56a8e0
Moved M17 destination callsign directly inside radio state data structure
2023-05-29 22:12:40 +02:00
423183700c
Moved M17 CAN to settings
2023-05-29 22:12:40 +02:00
fb8e3412c5
Implemented change of M17 baseband signal phase according to user settings for both TX and RX in Module17
2023-05-29 22:12:40 +02:00
e93b461beb
Added phase inversion setting to M17 modulator
2023-05-29 22:12:40 +02:00
adc916dbca
Added CAN setting
2023-05-29 22:12:40 +02:00
89aedef3ae
Implemented non-volatile memory for settings on Module 17
2023-05-29 22:12:40 +02:00
bd8f0d70c7
Added RX/TX inversion and mic gain setting on Module 17 UI
2023-05-29 22:12:40 +02:00
f32255c258
Implemented softpot settings UI for Module 17
2023-05-29 22:12:40 +02:00
c862638fd1
Created calibration data structure for Module17
2023-05-29 22:12:40 +02:00
22e9d8ce48
Module 17 UI: layout and main screen
2023-05-29 22:12:40 +02:00
e3b66f6a4b
Added channel access number and frame type to M17 data field in radio state, merged TX and RX channel access number fields of rtx configuaration data structure into one.
2023-05-29 22:12:40 +02:00
d8c4ba4420
Base sources for Module 17 UI
2023-05-29 22:12:40 +02:00
76ded06751
Split UI sources in a default one for the radios and the Module17 one.
2023-05-29 22:12:40 +02:00
4a3bc93fa4
Always send an M17 EOT frame as the last frame before terminating baseband output
2023-03-12 16:27:31 +01:00
a89a7523cb
Updated year in copyright headers
2023-02-08 16:33:02 +01:00
49c6cbd7c0
Added implementation of soft-decision Viterbi decoder for M17 protocol, updated version number in meson.build
2022-11-11 22:04:34 +01:00
Silvano Seva
Marco
jpucheu
Morgan Diepart
Niccolò Izzo
tarxvf
Wojciech Kaczmarski
Ryan Turner
k5jae
Mathis Schmieder